iphone problems after upgrading to 1.1.2

[GoogleCodeExporter]

Today I updgraded my iphone to the latest firmware 1.1.2. Everything during the 
process was 
good, nothing different happened. I used independence latest version as used 
with past 
upgrades.

I ended the process and the iphone works... or at least that I thought.

The problem I have know working on 1.1.2 is:

When I go into phone (green button) and try to dial a phone, just when I dail 
the first number it 
goes back to home.. meaning that I cannot dial any phone... same thing happens 
if I try to view 
my recent calls, instead it takes me home...!

Hardware Used:
iMac 2.4Ghz 3 Ram Mac OS Leopard
iPhone iphoneSimfree
Independence

Original issue reported on code.google.com by jot...@gmail.com on 30 Dec 2007 at 2:21

[GoogleCodeExporter]

I live in Brazil and had the same problem.  I found out that in 1.1.2 there is 
an incomplete list of country 
codes, the countries supported are mostly in North America, Western Europe and 
several in Asia.

To correct this problem, install AppTapp Installer (if you have not already) 
and select and install iWorld which 
will allow you to select the country you are in and correct the problem.  For 
me it worked perfectly.  However, 
I discovered the AppTapp Installer did not install directly into a 1.1.2 phone 
and an alternate, but easy, upload 
method using iNdependence had to be used.  If this is the case with you, advise 
me and I will try and help you.

Steven

Original comment by SDTeach...@gmail.com on 30 Dec 2007 at 10:04

[GoogleCodeExporter]

steven, thanks for your concern, I would really appreciate if you can give me a 
hand solving this.. My technical 
knowledge is not much... I would say none... I have upgraded flawlessly the 
other times, but know this time, just 
dont know what to do... where do I get the apptapp, etc..?

my email address is vivaus@mac.com

Thanks for your help
Juan

Original comment by jot...@gmail.com on 30 Dec 2007 at 1:55

[GoogleCodeExporter]

Hi Juan,

I tried to email you this information but the email bounced back as 
undeliverable.

Here are the instructions

1.) Download AppTapp Installer v3.1 from http://iphone.nullriver.com/beta/ to 
your desktop.
2.) While holding the "Control" key, click on AppTapp Installer and select 
"Show Package Contents"
3.) Open "Contents/Resources" folder
4.) Drag the application "Installer" onto your desktop
5.) Use iNdependence v1.3.1 to upload the "Installer" application onto your 
iPhone. If you don't have 
iNdependence, you can download it at http://code.google.com/p/independence/
6.) Reboot your iPhone and the Installer icon should appear on the springboard

If, for some reason, you can’t download AppTapp v3.1 and/or locate the 
Installer application within it, I can 
email it to you but please verify your email address.

Steven

Original comment by SDTeach...@gmail.com on 30 Dec 2007 at 4:24

[GoogleCodeExporter]

Steven, Thanks a lot, your information has been really useful, my iphone is 
know working properly and 
managed to install some other applications!

I have a new problem, know is with my wifes iphone... did exactly the same 
procedure,, when iphone was 
updating the firmware, got a message that said could not update need to restore 
iphone...

I tried using independence with o luck... then I restored this, know is locked 
with firmware 1.1.2 ( itunes logo 
an connector shows in screen) I then tried to downgrade...but independence 
stays in waiting to enter DFU 
mode......

any advise on what to do??

Original comment by jot...@gmail.com on 31 Dec 2007 at 5:06

[GoogleCodeExporter]

my email address is jota73@gmail.com

Original comment by jot...@gmail.com on 31 Dec 2007 at 5:06

[GoogleCodeExporter]

JOTA73.....I have the same problem.....can you help me??? too???

Original comment by JustynHa...@gmail.com on 2 Jan 2008 at 9:01

[GoogleCodeExporter]

hey justynharper, sure, tell me what is happenning... write me at 
jota73@gmail.com

Original comment by jot...@gmail.com on 2 Jan 2008 at 9:39