search

DSheirer / sdrtrunk

A cross-platform java application for decoding, monitoring, recording and streaming trunked mobile and related radio protocols using Software Defined Radios (SDR). Website:
GNU General Public License v3.0
1.6k stars 256 forks source link

YSF Support? #1572

Open troyBORG opened 1 year ago

troyBORG commented 1 year ago

The local Amateur Radio Club Repeater near me uses YSF. I was wondering if you can add support for this, or if its already implemented why isn't it listed as YSF in the encoders

DSheirer commented 1 year ago

@troyBORG I'd like to implement this at some point. However, I don't have any sample recordings to test against. Could you please make some baseband channel recordings from this repeater when user's are transmitting and send them to me?

You can turn on baseband recording in the playlist editor in the channel configuration. You can use any of the protocol decoders (NBFM, DMR, etc) ... it won't decode the signal but it will record the channel's baseband I/Q sample stream.

For expectation management ... it may be a while until I can get to adding this support. There's still quite a number of features in the queue that I'm working through.

troyBORG commented 1 year ago

How long of a recording do you need?

I can try to get you two different ones. One from a close strong signal, and one from a further away antenna.

troyBORG commented 1 year ago

I know this frequency says it used "FM Fusion WIRES-X" This 2m Repeater near me was broadcasting this (it starts and stops) I'm wondering if it was some kind of data being sent?

20230612_001005_147315000_HAM_KD0WY_2m_Repeater_Clinton__IA_54_baseband.zip

DSheirer commented 1 year ago

Awesome. I downloaded it. Once I get a free second, I'll dig into it.

mattdrum commented 2 months ago

Has this been worked on at all? I wound like to 2nd this request and am willing to contribute to make it happen.

DSheirer commented 2 months ago

It hasn't been worked. Feel free to try it.

troyBORG commented 2 months ago

I know OpenWebRX has it working. But needs p25.

To bad you two couldn't work together and get p25 working on openwebrx and then get all the YSF, DMR, FAX, SSTV, FT8, WSPR.... from their stuff...

On Wed, Sep 4, 2024, 2:05 AM Denny Sheirer @.***> wrote:

It hasn't been worked. Feel free to try it.

— Reply to this email directly, view it on GitHub https://github.com/DSheirer/sdrtrunk/issues/1572#issuecomment-2328077871, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACPMTOWOXNRQXVLV4BWH663ZU2WMPAVCNFSM6AAAAABNTOLZ3GVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMRYGA3TOOBXGE . You are receiving this because you were mentioned.Message ID: @.***>