search

DVE2000 / Dogbone

A Fusion360 addin that creates dogbone joints for wood joinery.
150 stars 43 forks source link

Error on Obtuse or Acute angle detection #67

Closed 3DTek-xyz closed 1 week ago

3DTek-xyz commented 1 month ago

Hi Again There is an error that pops up when you enable obtuse or acute angle detection.

image
pludikar commented 1 month ago

Hi Ben,

Just uploaded another version. The error should now be fixed. I obviously wasn't too diligent doing my regression testing when I changed from a parametric mode to being able to update the dogbones. Sorry about that. It's possible that they may be other bugs lurking - just let me know and I'll try and get them fixed

After all this I hope you still find the add-in useful 🙂

Peter

From: 3DTek @.> Sent: October 1, 2024 5:29 PM To: DVE2000/Dogbone @.> Cc: Subscribed @.***> Subject: [DVE2000/Dogbone] Error on Obtuse or Acute angle detection (Issue #67)

Hi Again There is an error that pops up when you enable obtuse or acute angle detection. image.png (view on web)https://github.com/user-attachments/assets/32ac84d3-d58c-403e-a30e-ad995bb546ea

— Reply to this email directly, view it on GitHubhttps://github.com/DVE2000/Dogbone/issues/67, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ABBJGTCTL3PX57EAA4CN7ELZZMH2NAVCNFSM6AAAAABPGN4VMOVHI2DSMVQWIX3LMV43ASLTON2WKOZSGU3DAMRUGYZDMNY. You are receiving this because you are subscribed to this thread.Message ID: @.***>

pludikar commented 1 month ago

Hi Ben,

Judging from one of the newer add-in examples, it looks like the add-in start up philosophy has changed in the last little while. I need to absorb what they've done and then incorporate the changes. It may require some rejigging how I get some of my global variables initialized. Hopefully it'll allow the add-in to initialize cleanly - there's currently an internalValidation Error on startup, which probably started happening when F360 upgraded the python version they use, and I didn't notice.

Peter

From: Peter Ludikar @.> Sent: October 1, 2024 7:37 PM To: DVE2000/Dogbone @.> Subject: Re: [DVE2000/Dogbone] Error on Obtuse or Acute angle detection (Issue #67)

Hi Ben,

Just uploaded another version. The error should now be fixed. I obviously wasn't too diligent doing my regression testing when I changed from a parametric mode to being able to update the dogbones. Sorry about that. It's possible that they may be other bugs lurking - just let me know and I'll try and get them fixed

After all this I hope you still find the add-in useful 🙂

Peter

From: 3DTek @.> Sent: October 1, 2024 5:29 PM To: DVE2000/Dogbone @.> Cc: Subscribed @.***> Subject: [DVE2000/Dogbone] Error on Obtuse or Acute angle detection (Issue #67)

Hi Again There is an error that pops up when you enable obtuse or acute angle detection. image.png (view on web)https://github.com/user-attachments/assets/32ac84d3-d58c-403e-a30e-ad995bb546ea

— Reply to this email directly, view it on GitHubhttps://github.com/DVE2000/Dogbone/issues/67, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ABBJGTCTL3PX57EAA4CN7ELZZMH2NAVCNFSM6AAAAABPGN4VMOVHI2DSMVQWIX3LMV43ASLTON2WKOZSGU3DAMRUGYZDMNY. You are receiving this because you are subscribed to this thread.Message ID: @.***>

pludikar commented 1 week ago

Hi Ben, I appreciate this has taken a while, but I finally managed to get my hands on an apple machine. The dogbone icons do appear on both the design and manufacturing workspaces with my last update. However, it's important to note that the folder in the add-in folder can only have a-zA-Z0-9 characters in its name! When you 1st add the addin using the "+" in the Scripts and Add-ins dialog box - make sure the dogbone folder is named "dogbone" - no prefixes or suffixes (rename it if necessary). Everything should work from now on.

Regards Peter

From: Peter Ludikar @.> Sent: October 1, 2024 8:28 PM To: DVE2000/Dogbone @.> Subject: Re: [DVE2000/Dogbone] Error on Obtuse or Acute angle detection (Issue #67)

Hi Ben,

Judging from one of the newer add-in examples, it looks like the add-in start up philosophy has changed in the last little while. I need to absorb what they've done and then incorporate the changes. It may require some rejigging how I get some of my global variables initialized. Hopefully it'll allow the add-in to initialize cleanly - there's currently an internalValidation Error on startup, which probably started happening when F360 upgraded the python version they use, and I didn't notice.

Peter

From: Peter Ludikar @.> Sent: October 1, 2024 7:37 PM To: DVE2000/Dogbone @.> Subject: Re: [DVE2000/Dogbone] Error on Obtuse or Acute angle detection (Issue #67)

Hi Ben,

Just uploaded another version. The error should now be fixed. I obviously wasn't too diligent doing my regression testing when I changed from a parametric mode to being able to update the dogbones. Sorry about that. It's possible that they may be other bugs lurking - just let me know and I'll try and get them fixed

After all this I hope you still find the add-in useful 🙂

Peter

From: 3DTek @.> Sent: October 1, 2024 5:29 PM To: DVE2000/Dogbone @.> Cc: Subscribed @.***> Subject: [DVE2000/Dogbone] Error on Obtuse or Acute angle detection (Issue #67)

Hi Again There is an error that pops up when you enable obtuse or acute angle detection. image.png (view on web)https://github.com/user-attachments/assets/32ac84d3-d58c-403e-a30e-ad995bb546ea

— Reply to this email directly, view it on GitHubhttps://github.com/DVE2000/Dogbone/issues/67, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ABBJGTCTL3PX57EAA4CN7ELZZMH2NAVCNFSM6AAAAABPGN4VMOVHI2DSMVQWIX3LMV43ASLTON2WKOZSGU3DAMRUGYZDMNY. You are receiving this because you are subscribed to this thread.Message ID: @.***>