No sound files in screen firmware

DaGr70 / Marlin_Longer_LK4_pro

Optimized firmware for RepRap 3D printers based on the Arduino platform. Modified with a new DWIN T5UID1 touchscreen implementation.

GNU General Public License v3.0

17 stars 1 forks source link

No sound files in screen firmware #3

Open thghca opened 3 years ago

thghca commented 3 years ago

Lk4pro has no speaker but screen has connector and easy to install one. May be copy them from reloaded?

Also screen firmware needs separate repo.

DaGr70 commented 3 years ago

Thanks Thghca for your comment. I've update touchscreen firmware with 3 sound files from original Dessuuu firmware: Avalaible in this Release

I don't have any speaker to try... can you test it in your side, please ?

thghca commented 3 years ago

Sounds works.

Screen for some reason has more sounds then flashed. I set buzzer pin (requred even not used for M300 ) and it plays more then first 3. =)

thghca commented 3 years ago

I use piezo speaker. Boot good on PC but awful on printer. Click and notification quiet on PC but good on printer.

DaGr70 commented 3 years ago

Hello thghca, In fact, I tested piezzo speaker on my screen but the noises (boot ) are not good. Ok with notification and click sounds but volume is very low