settings get lossed

[GoogleCodeExporter]

installed r63
set ignore standby and light on error to on
also start to installed file, and return autoboot
save settings

click sysmenu
1st this gives a code dumpo
so shutdown wiii
check again settings..all are fine..boot
play via cfg loader

press home, from hbc click sysmenu
and.. i m in sysmenu..shutdown wii..its in standby instead of shutdown..so
switch on..look in priiloader settings..all settings are gone..hacks still
available

seems somethings overwrites the settings

Original issue reported on code.google.com by yvonne.m...@gmail.com on 25 Feb 2010 at 11:48

[GoogleCodeExporter]

this happens when loading the iso containing the forwarder csme00 which should 
load
the sysmenu from any loader, if priiloader is setup to startup installed file 
and
reboot to autoboot

so in anyway this channel deletes the settings of priilaoder

Original comment by yvonne.m...@gmail.com on 26 Feb 2010 at 12:07

[GoogleCodeExporter]

settings get reset when priiloader detected the settings size isn't the same as 
it
should be. 

however, the code dump is what im interrested in. what rev were you running 
before r63?

Original comment by dac...@gmail.com on 26 Feb 2010 at 6:23

[GoogleCodeExporter]

before 63 i was running 58

i m little bit confused, how can a forwarder modify setting size?

maybe there will be a priiloader internal solution to get into wii menu, also, 
if set
to autoboot to file or hbc

or maybe we let it start to system menu, but return to installed file/hbc 
(currently
not possible)

Original comment by yvonne.m...@gmail.com on 28 Feb 2010 at 4:30

[GoogleCodeExporter]

have you tried uninstalling priiloader using cios and reinstalling it? (to reset
everything)

you could always use the debug info on settings to see if im right :P (it 
should say
its resetting settings)
that is, if you dont have a usbgecko

also, just a side note , DSI code dumps dont mean you h ave to shutdown the 
wii. you
can also press reset to load HBC since i made it load the HBC stub :)

Original comment by dac...@gmail.com on 28 Feb 2010 at 5:34

[GoogleCodeExporter]

thanks daco
just ordered a gecko, cant code anything, but maybe i can elp with this to find 
issues

Original comment by yvonne.m...@gmail.com on 28 Feb 2010 at 6:51

[GoogleCodeExporter]

(@yvonne) Off topic, but whered you get a usb gecko?  I want one >_<

Original comment by lpq...@gmail.com on 28 Feb 2010 at 7:02

[GoogleCodeExporter]

got mine at ebay for 20€

Original comment by yvonne.m...@gmail.com on 28 Feb 2010 at 7:55

[GoogleCodeExporter]

ebay , some random shops maybe or (if nuke didn't nuke the svn >_> ) build your 
own
using the shemetic he releaseD 

also, this is why i added the show debug info setting. for ppl who dont have a 
gecko

Original comment by dac...@gmail.com on 28 Feb 2010 at 8:01

[GoogleCodeExporter]

any changes on this issue?

Original comment by dac...@gmail.com on 13 Mar 2010 at 2:54

[GoogleCodeExporter]

as there is now the PRUNE word in cfgloader supported, the iso with the 
forwarder is
no longer needed, so it will still overwrite settings, if used
but i dont use it any longer, as i now have a way to get into wii menu based on
cfgloader+magicword in priiloader (r69)

Original comment by yvonne.m...@gmail.com on 13 Mar 2010 at 4:32

[GoogleCodeExporter]

but the settings still get deleted/ignored for some odd reason... :/

Original comment by dac...@gmail.com on 13 Mar 2010 at 5:01

[GoogleCodeExporter]

Original comment by dac...@gmail.com on 15 Aug 2010 at 1:09

• Changed state: Needs_Testing

[GoogleCodeExporter]

Original comment by dac...@gmail.com on 10 Oct 2010 at 10:01

• Changed state: Done