Priiloader v0.4 + Your Shape Camera = no system menu

[GoogleCodeExporter]

What steps will reproduce the problem?
1.Install Priiloader v0.4
2.Your shape Camera plugged in to wii
3.Boot wii

What is the expected output? What do you see instead?

System menu/Black screen
What version of priiloader are you using? On what ios/system menu?
priiloader v0.4
ios 70
system menu 4.2u
Do you have any IOS patches installed? (if so which ios and what patch?)
250 fakesign es_identify
249 fakesign es_identify
223 fakesign es_identify
222 fakesign es_identify
202 fakesign es_identify
70 fakesign
60 fakesign es_identify
56 fakesign
55 fakesign
53 fakesign
36 fakesign es_identify

What are your wii system menu settings

Original issue reported on code.google.com by trevorha...@gmail.com on 7 Apr 2010 at 4:29

[GoogleCodeExporter]

summary = the report >_>
i can figure out why but the working on restart is odd. also, you dont have a 
SD card
inserted or something?

(note to self: camera = no system menu booting)

Original comment by dac...@gmail.com on 7 Apr 2010 at 5:05

• Changed title: Priiloader v0.4 + Your Shape Camera = no system menu

[GoogleCodeExporter]

Thanks for the quick reply and all your hard work.
I have an SD card in. It is the one I run all my apps off of. Like I mentioned 
before
this problem was not present in priiloader v0_3b and my SD card was in then 
also. One
more thing, I do not know if it will help or not. The installer for 0_3b runs 
fine
but the 0_4 says something about not deleting a few tickets but then continues 
with
install. If you want I will run the installer again and tell you the exact 
error.

Original comment by trevorha...@gmail.com on 7 Apr 2010 at 5:23

[GoogleCodeExporter]

the 0.3 installer always tried to delete those files but didn't give the 
warning or
info. it does now

also,  if you have an SD in then the USB should not be touched by priiloader. 
unless
ofc the SD could not be mounted...

also, my camera worked just fine...

anyway, see if you can get any addional info by enabling the gecko output (since
obviously you have no usbgecko)

Original comment by dac...@gmail.com on 7 Apr 2010 at 5:31

[GoogleCodeExporter]

Interesting, the hacks.ini file is on the SD card and the hacks are working so 
it
seams like it mounted the SD but who knows.

Your camera did not cause the black screen? How strange, must be something in 
my setup.

I will enable the gecko output and report back, unfortunately I need to go to 
work
rite now so it mite be tomorrow before I can check.

Original comment by trevorha...@gmail.com on 7 Apr 2010 at 5:46

[GoogleCodeExporter]

Sorry Daco, I got home from work to my internet connection being out so this is 
the
first opportunity I had to reply. Ok here is the gecko output
Resolution is 640x416
BootState:1
AutoBoot : System Menu
SM ios version : 70
Using 00000088 for booting. REPORT IF INCORRECT!
Filename /title/00000001/00000002/content/10000088.app
Entrypoint : 00003400
Failed to find the newline\zero byte @ 0x810c9991
Hacks:17
When the camera is plugged in it just freezes with this info on the screen 
until I
hold down the power and then reset to get into priiloader. When the camera is
unplugged the gecko output is exactly the same but it auto boots the system 
menu just
fine. One more bit of info, it will autoboot HBC just fine with or without the 
camera
plugged in. Also if I launch priiloader by holding down reset and then click on
system menu it freezes at the same place. I tried plugging other usb devices 
in, usb
microphone, usb keyboard, and the only one that creates the problem is the your 
shape
camera. I decided to try uninstalling ios 58, the one that comes on the your 
shape
disc, it still hangs when the camera is plugged in so I reinstalled it. I use a 
usb
loader so usually the camera is plugged in the top usb port but I also tried 
plugging
the camera in the other usb port and it still freezes. For now I am back on
priiloader v0_3b since this does not happen. If there is anything else you want 
me to
try let me know.
 Thanks again for your help and hard work.

Original comment by trevorha...@gmail.com on 8 Apr 2010 at 6:52

[GoogleCodeExporter]

thank you for the log.
this tells me alot eventho its still odd...

are you open for any tests i might want you to run? 

Original comment by dac...@gmail.com on 8 Apr 2010 at 7:15

[GoogleCodeExporter]

Glad it helps. I am heading out of town in a few hours for a few days but I can 
try
some stuff before I go or when I get back.

Original comment by trevorha...@gmail.com on 8 Apr 2010 at 7:31

[GoogleCodeExporter]

disable all autoboot settings, enable gecko output and run the following dol in 
HBC
try and boot system menu then.

Original comment by dac...@gmail.com on 8 Apr 2010 at 7:37

Attachments:

• priiloader.dol

[GoogleCodeExporter]

Okay, done
Gecko output was different, I can copy it if you need it but it did load the 
system
menu! Sweet! what now?

Original comment by trevorha...@gmail.com on 8 Apr 2010 at 7:48

[GoogleCodeExporter]

it what? 
i was hoping it would crash. and yes the output is different cause i added a 
few lines
install that same dol using the following installer then... :/ (just run the
following dol and install)

Original comment by dac...@gmail.com on 8 Apr 2010 at 8:09

Attachments:

• Installer.dol

[GoogleCodeExporter]

well same problem. Gecko has the lines shutting down devices... and checking 
for usb
device but freezes... 
If I unplug the camera the lines 

usb device found. shutting it down
and
all devices & usb handled

show up after the other two and it launches system menu...

Original comment by trevorha...@gmail.com on 8 Apr 2010 at 8:19

[GoogleCodeExporter]

ok so i know where it crashes now :)

the issue now is fixing it >_>

this can get tricky...

Original comment by dac...@gmail.com on 8 Apr 2010 at 8:46

[GoogleCodeExporter]

I guess at least you know where the issue is.
I am heading out of town now so I cant test anything tell I get back.
If you think of something you want me to try go ahead and post it and Ill try 
it asap
when I get home and let you know the results.
Once again, thanks for everything! :-)

Original comment by trevorha...@gmail.com on 8 Apr 2010 at 8:50

[GoogleCodeExporter]

how does the following work ?

Original comment by dac...@gmail.com on 8 Apr 2010 at 9:01

Attachments:

• Installer.dol

[GoogleCodeExporter]

Had a delay on leaving town
that autoboots rite up. You da man.

Original comment by trevorha...@gmail.com on 8 Apr 2010 at 9:13

[GoogleCodeExporter]

Issue 77 has been merged into this issue.

Original comment by dac...@gmail.com on 9 Apr 2010 at 8:37

[GoogleCodeExporter]

Original comment by dac...@gmail.com on 9 Apr 2010 at 8:37

• Changed state: Started

[GoogleCodeExporter]

this still works right?

Original comment by dac...@gmail.com on 16 May 2010 at 7:38

[GoogleCodeExporter]

ya it does.

Original comment by sid.mani123@gmail.com on 16 May 2010 at 7:49

[GoogleCodeExporter]

setting it as fixed then

Original comment by dac...@gmail.com on 16 May 2010 at 7:56

• Changed state: Fixed