search

DanWBR / dwsim

DWSIM is a Steady-State and Dynamic Sequential Modular Chemical Process Simulator for Windows, Linux and macOS.
https://dwsim.org
GNU General Public License v3.0
265 stars 89 forks source link

Compressor does not provide results although calculates (blue) then resets to default values #600

Closed CKapp-slrconsulting closed 3 months ago

CKapp-slrconsulting commented 3 months ago

I have a simple suction line, compresser and discharge line. Everything is complete and I can hit the solve button and the diagram turns blue as it should, however my input values (flow, pressures, temps efficiency) turn to default, they actual values are not saved (trying to go from 500 PSIG and add another 1,000 PSIG. The purpose of my calculation is to determine gas properties to LKP and estimate horsepower and discharge conditions.

My computer is windows 11 Dell laptop.

DanWBR commented 3 months ago

@CKapp-slrconsulting you need to press enter to confirm the new values

CKapp-slrconsulting commented 3 months ago

Thans Daniel. That simple and yes that worked. Chris

Christean Kapp Principal Engineer - Air Quality M +1 832-349-2703 E @.*** SLR International Corporation Houston TX United States

​Confidentiality Notice and Disclaimer ​This communication and any attachment(s) contain information which is confidential and may also be legally privileged. It is intended for the exclusive use of the recipient(s) to whom it is addressed. If you have received this communication in error, please e-mail us by return e-mail and then delete the e-mail from your system together with any copies of it. Any views or opinions are solely those of the author and do not represent those of SLR International Corporation, or any of its subsidiaries, unless specifically stated.

From: Daniel Wagner @.> Sent: Tuesday, March 5, 2024 12:26 PM To: DanWBR/dwsim @.> Cc: Christean Kapp @.>; Mention @.> Subject: Re: [DanWBR/dwsim] Compressor does not provide results although calculates (blue) then resets to default values (Issue #600)

You don't often get email from @.*** Learn why this is importanthttps://aka.ms/LearnAboutSenderIdentification

@CKapp-slrconsultinghttps://github.com/CKapp-slrconsulting you need to press enter to confirm the new values

- Reply to this email directly, view it on GitHubhttps://github.com/DanWBR/dwsim/issues/600#issuecomment-1979385063, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BGVGCXZ6F3MD2FQQ4AFSR3TYWYE3TAVCNFSM6AAAAABEHMLF6OVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNZZGM4DKMBWGM. You are receiving this because you were mentioned.Message ID: @.***>