Parallel port webcams: need ability to choose non-standard parallel port address

[GoogleCodeExporter]

Message from Radu:
I have recently switched to a newer laptop for my observations and a SC 
modified webcam on parallel port for guiding.
The problem is that only the very old laptops have embedded parallel ports, and 
these are getting harder to find and work with.
So my newer laptop unfortunately does not have an embedded port, but I managed 
to find an express card with parallel port for it. The OS sees it, but it 
assigns automatically a non-standard legacy LPT port address which cannot be 
changed and unfortunately PHD Guiding looks only for the standard legacy 
addresses like 0x378.
Is it possible to add a support feature to PHD Guiding which would allow the 
user to input a different port address for LPT?

Original issue reported on code.google.com by andy.gal...@gmail.com on 4 Feb 2014 at 12:04

[GoogleCodeExporter]

Original comment by andy.gal...@gmail.com on 4 Feb 2014 at 12:05

• Changed title: Parallel port webcams: need ability to choose non-standard parallel port address

[GoogleCodeExporter]

Original comment by andy.gal...@gmail.com on 10 Feb 2014 at 2:22

• Added labels: Type-Enhancement
• Removed labels: Type-Defect

[GoogleCodeExporter]

This issue was closed by revision r721.

Original comment by andy.gal...@gmail.com on 10 Feb 2014 at 3:24

• Changed state: Fixed