search

DarkFlippers / unleashed-firmware

Flipper Zero Unleashed Firmware
https://t.me/flipperzero_unofficial
GNU General Public License v3.0
15.81k stars 1.34k forks source link

Add *9bit 318MHz* to Applications>Sub-GHz>Sub-GHz Bruteforcer #427

Open hotdjdave opened 1 year ago

hotdjdave commented 1 year ago

Describe the enhancement you're suggesting.

I have several remotes (in the USA) with 9-pin dip switches (9bit) to open gates/garages, and they all transmit on 318MHz. I'm not sure if it is Chamberlain, Linear, other, or even if that matters. Could this frequency be added as one of the options under Applications > Sub-GHz > Sub-GHz Bruteforcer?

Thanks.

Anything else?

Also, as a side note, none of the deBruijn applications seem to work. I've tested all of them on gates where I know the frequency and dip-switch settings.

xMasterX commented 1 year ago

Provide raw recordings of multiple presses of button on your remote, and photos + model / fccid

hotdjdave commented 1 year ago

There are two different remotes: a larger gray one and a smaller whitish one with a black button. If you need anything else please let me know. Thanks. David. 20230429_224520 20230429_224621 20230429_225124 20230429_225208 20230429_225249 ![Uploading 20230429_225301.jpg…]()

hotdjdave commented 1 year ago

![Uploading 20230429_225301.jpg…]()

hotdjdave commented 1 year ago

Uploading 20230429_231537.mp4…

hotdjdave commented 1 year ago

https://user-images.githubusercontent.com/130207130/235338851-1e48e864-8404-44ef-b184-d7d320be67cb.mp4

Videos won't upload.

hotdjdave commented 1 year ago

https://user-images.githubusercontent.com/130207130/235338952-f649563e-ba3d-41ad-a3e4-3b4bcd6be979.mp4

hotdjdave commented 1 year ago

1682835753999589979947405136378

hotdjdave commented 1 year ago

20230430_000547 20230430_000535

hotdjdave commented 1 year ago

I think I meant: _CAME_bruteforce, but wherever it may be needed.

hotdjdave commented 1 year ago

Is anyone working this? Thanks.

hotdjdave commented 1 year ago

Any progress?

xMasterX commented 1 year ago

Any progress?

Why you keep asking for something again and again, you still not sent RAW recordings I asked about in my first message You think its possible to do something by looking on photos?

hotdjdave commented 1 year ago

Any progress?

Why you keep asking for something again and again, you still not sent RAW recordings I asked about in my first message You think its possible to do something by looking on photos?

Sorry, I uploaded at least two videos to this thread. I was not sure if anyone had seen this. If the you are unable to see the videos or if the information in the videos is not sufficient, please let me know what to do.

Thank you.

xMasterX commented 1 year ago

Any progress?

Why you keep asking for something again and again, you still not sent RAW recordings I asked about in my first message You think its possible to do something by looking on photos?

Sorry, I uploaded at least two videos to this thread. I was not sure if anyone had seen this. If the you are unable to see the videos or if the information in the videos is not sufficient, please let me know what to do.

Thank you.

are you joking? on first two videos you doing exactly what i asked for I said:

Provide raw recordings of multiple presses of button on your remote

If you need more info what "raw recording" means you should ask that in first place

Where you sent me that files? There is none as i can see, only video showing how you recording them I asked for files from flipper, open read raw set correct frequency and modulation AM650, press ok, press button on your remote couple times at least 10, 5 short and 5 long holds, then send me resulting file

hotdjdave commented 1 year ago

Provide raw recordings of multiple presses of button on your remote, and photos + model / fccid

I'm sorry. I misunderstood you. I thought when you wrote "raw recordings" you meant video recordings. That is how I understood it. I will send the files of the recordings I record on F0.

hotdjdave commented 1 year ago

F0 Raw Sub Files for Bruteforcer.zip Files are attached. Github won't let me upload .sub files, so I zipped them. The one that ends in AS is for the Allstar remote and the one that ends in MC is for the Multi-Code remote. Let me know if this works for you. Thank you very much.

xMasterX commented 1 year ago

F0 Raw Sub Files for Bruteforcer.zip Files are attached. Github won't let me upload .sub files, so I zipped them. The one that ends in AS is for the Allstar remote and the one that ends in MC is for the Multi-Code remote. Let me know if this works for you. Thank you very much.

Good, will take a look on them later, also due to lack of flash space adding support of those protocols might be delayed for some time (there is no reason to add them only in bruteforcer app, better will be to add them at subghz lib level)