search

DarwinsBuddy / WienerNetzeSmartmeter

A home-assistant integration supporting WienerNetze Smartmeters as sensors
122 stars 12 forks source link

Einspeise Zählerstand "unknown" #146

Closed compumark closed 10 months ago

compumark commented 1 year ago

Hi,

I have connected my HA with this plugin via HACS to the Wiener Netze Smartmeter. The meter with the "Bezug" I am correctly receiving daily. I also have a second meterpoint for the produced PV. This I can see in the smartmeter website from Wiener Netzte and the integrations reads is correctly, but the data is always "unknown". The attributes in the integration are correct shown.

And a second question: Is it possible to get also the 181 and 182 values instead only the 180? thanks a lot for any help. Mark

Kuschla commented 1 year ago

Hi, I've added the integration a 2nd time - in the 1st version, I have the same like you describe. In the 2nd, it's vice-versa "Bezug" is unknown, but the feed-in point shows statistical data. You can then add the one (or other) Smart Meter point to the energy Dashboard. Looks like this then: https://github.com/DarwinsBuddy/WienerNetzeSmartmeter/issues/51#issuecomment-1519046061

However, as referenced in the same issue, it works nicely for the statistical data, not for the live feed-in data yet

compumark commented 1 year ago

Hi, I tried that yesterday and today it looked like this again:

image

The second one has again 2 entities: image

the other one, 0 entities. image

I will try to delete it now and create 2 new integrations. let see, if that works

compumark commented 1 year ago

After some days of checking, I can say that I now get values for the Einspeisung, but those seems to be daily values and noch the counter of the smartmeter like the Bezug values... Very strange

compumark commented 1 year ago

Hi @Kuschla I monitored it now a couple of days and come to the conclusion:

The Zählerpunkt marked as favorite in the smartmeter portal image

gets the correct Zählerstand transferred - if they are available in the portal. The other - non favorite Zählerpunkt - seems to get the used kWh from the day, not the Zählerstand. image

In the screenshot above I just swapped the favorite to the Bezugszähler in the smartmeter portal and the next refresh reads the total used kWh correctly, but the Einspeisung swaps back to the kWh delivered to the Zählerstand.

DarwinsBuddy commented 10 months ago

if there is still some unexpected behavior please describe the issue and open up a new ticket. closing this due to inactivity