Open Jimbly opened 6 years ago
esholton13
commented
6 years ago WAIT!!! The simple solution is Self > Options > Interface Options > "Use Legacy Interface" under Action Icons section
The more complicated solution is check the other issues on this forum before you send in your issue like I did.. oops..
Took me about 15 seconds to find the solution after I posted this #feelsbadman
RhaomATITD
commented
6 years ago The other problem (which I am unsure is documented anywhere at the moment) that causes a lot of people problems is that interface icons have to be set to normal and interface size to small otherwise automato cannot read them.
esholton13
commented
6 years ago Both are documented in closed topics. I was just a dummy and created a thread before checking. If it's worthwhile to keep this one open, I wouldn't mind adding screenshots of the two options (legacy and small interface)
Cegaiel
commented
6 years ago Just adding another comment for future people finding this post. The other possibility is if you don't use Options, Interface Options, Interface Size = Small. Any other size won't work.
In addition to using Legacy Interface for Tale 8, be sure the clock is actually showing. You can toggle the correct clock on/off by typing /clockloc in chat bar.
If you've done all of those, then also be sure no other windows overlap the clock (even it's just a little bit). If that fails, try to move/drag your clock window very slightly.
All Open Issues can be checked here: https://github.com/DashingStrike/Automato-ATITD/issues
All Closed Issues (but still provide some info) can be checked here: https://github.com/DashingStrike/Automato-ATITD/issues?q=is%3Aissue+is%3Aclosed
Cegaiel
commented
5 years ago Note: Confirmed that the "Use Legacy Interface" option does not appear while you're on Welcome Island. You'll have to wait until you complete the Tutorial before setting this ^_^
Submitter: Komaba I am unsure what the error is, but multiple scripts are having trouble extracting info from the clockloc window. I'm guessing it is due to the new regions, or a changed border (I don't remember from T7 what that window looked like). I have search through the images to see if the scripts call upon a specific window, but since the info within the clockloc change there must be a different function that extracts this information. Despite my best efforts, I am not able to locate this function/script. I was wondering if anyone was able to update this for T8 or knows where the code is that extracts the coordinates and time. I would be happy to try and fix it for T8 if I can just find it. Thanks for reading!