search

DeBesten / open9x

Automatically exported from code.google.com/p/open9x
0 stars 0 forks source link

English Documentation is a little bit outdated; Update included #191

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago 
Which board (stock / gruvin9x / sky9x) are you using?
stock

What is your open9x FW version?
r1919 (compiled myself)

What is your open9x EEPROM version?
212-3

What steps will reproduce the problem?
Just load English version from Project Home

What is the expected output? What do you see instead?
I marked all chapters needs updates with a yellow background. Read it, correct 
it and insert it in current version. Hope I got a current one on homepage.
Page 18: ADC Filter option no longer valid --> Strickthrough
Page 22: Calibration; Reminder not to forget the pots (I always do)
Page 35ff: Editing Mix row: Add formula for better understanding of mix 
calculation; Changed text to mention if offset, weight is on input or output
Removed (strickthrough) Differ because it is part of Diff function
Delay Down/Up: Hopefully this hint is correct it is on input?
Slow Down/Up:  Hint curve influence output speed, because Slow is on input
Page 57ff: Add hint for compilation for a need of a crosscompiler and add more 
make examples

Please provide any additional information below.
All done and attached this request. Hopefully it is the most current version, 
so if you are happy with the changes just put it to project home and remove the 
yellow background. If not take the marked text and change it as you want.

Original issue reported on code.google.com by open.20.fsguruh@xoxy.net on 5 Feb 2013 at 5:56

Attachments:

GoogleCodeExporter commented 8 years ago 
I will let Kilrah / Franck / Zdenek review and commit if they do agree, I am 
lacking time these days, too much to do.

Original comment by bson...@gmail.com on 5 Feb 2013 at 6:44

GoogleCodeExporter commented 8 years ago 
Thank you very much open.20.fsguruh@xoxy.net for showing the deficiency of 
manual and effective assistance for their removal.

Because in the meantime I also worked on the manual, I give here to download 
the new version of the manual containing my news and (hopefully) all proposed 
adjustment from open.20.fsguruh@xoxy.net.

Original comment by ztrojanek on 6 Feb 2013 at 5:00

Attachments:

GoogleCodeExporter commented 8 years ago 
Perhaps it would be worth it to remove descriptions of the older versions of 
the firmware (the crossed out) to guide became clearer?

Original comment by ztrojanek on 6 Feb 2013 at 5:06

GoogleCodeExporter commented 8 years ago 
Hi ztrojanek,

thanks for updating the current version. You put everything I changed inside, 
so I am happy with this version. 
Just a note, on side 37 for point 12 Delay Down / Up.
I am not 100% sure if this is done on input side, because it is hard to test. 
Could this be verified? Does it make any difference? 
After rethinking, this may not have an effect for delay anyway.
It is not wrong, but you could leave out the hint as well.
All other changes are retested by myself, this was the only critical point.

And be sure, this document helped me a lot! Thanks again.

Original comment by open.20.fsguruh@xoxy.net on 6 Feb 2013 at 5:42

GoogleCodeExporter commented 8 years ago 
Hi ztrojanek,

I think removing some of the older versions would make thinks easier. However 
sometimes it is good to have it like for the filter settings, which disappeared.

For a german tranlation somebody did a good compromise, see link below. He 
mainly removed the text, but left a comment about the old topic, and added the 
release version, since it was changed.

http://9xforums.com/forum/viewtopic.php?f=45&t=2710&sid=d5a34acbe38a21d94c9941cf
5264b0b1#p38041

Original comment by open.20.fsguruh@xoxy.net on 6 Feb 2013 at 6:23

GoogleCodeExporter commented 8 years ago 
Thanks you both!

Original comment by bson...@gmail.com on 6 Feb 2013 at 8:30