Backlight is backwards

[GoogleCodeExporter]

Which board (stock / gruvin9x / sky9x) are you using?
Stock Turnigy 9 version 2.  HK backlight installed per modification (OK-rimr on 
Youtube.)

What is your open9x FW version?
latest version with SPP2

What is your open9x EEPROM version?

What steps will reproduce the problem?
1. FW flashed
2. Backlight is on when setting is off and off when setting is on.
3.

What is the expected output? What do you see instead?
This is the same problem described in issue 49.  I could not understand the fix 
in that discussion.

Please provide any additional information below.
The same hardware works with the latest version of ER9X.

Original issue reported on code.google.com by dkdw...@gmail.com on 18 Feb 2013 at 10:20

[GoogleCodeExporter]

Did you select the SP22 option in companion9x?

Original comment by bson...@gmail.com on 18 Feb 2013 at 11:09

[GoogleCodeExporter]

Yes I did select SP22 and that was my mistake.  SP22 is specific to address 
smartie board reversing default.  My standard set up does not require SP22.  I 
have re-flashed FW without SP22 and everything works fine.

Thanks for the quick answer and the great work on this project

Original comment by dkdw...@gmail.com on 19 Feb 2013 at 7:48

[GoogleCodeExporter]

Original comment by bson...@gmail.com on 19 Feb 2013 at 7:52

• Changed state: Invalid