Bug in global variables and flight phases.

[GoogleCodeExporter]

Which board (stock / gruvin9x / sky9x / Taranis) are you using?
Taranis

What is your openTx FW version?

r2688

What is your openTx EEPROM version?

215

What steps will reproduce the problem?
1. Assign the Global Variable value of flight mode 0 to other flight modes in 
Compnion 9x
2. Copy this setting to the Taranis
3. Go to the respective setting on the Taranis TX
4. What was done in step 1. is not working correctly.

What is the expected output? What do you see instead?
See link below.

Please provide any additional information below.

Images:

http://www.rcgroups.com/forums/showpost.php?p=25947081&postcount=8804

Original issue reported on code.google.com by extremf...@gmx.de on 2 Sep 2013 at 7:48

Attachments:

• Displaysim.png

[GoogleCodeExporter]

What I see in reality:

- Flight mode 1 has no value, the field is blank and cannot be accessed with 
the cursor.

- Flight modes 2-4 are not ok in so far as flight mode 1 instead of 0 is 
displayed. It is however possible to change the flight modes here. One cannot 
change to entering normal specific numbers by long enter press as well.

- Flight mode 5 displays "F20" instead of "20". "F" can be accessed by cursor, 
but not changed. "20" can both be accessed and changed, that's why there is 
"25" in the photo.

Original comment by extremf...@gmx.de on 2 Sep 2013 at 7:51

Attachments:

• Displayreal.JPG

[GoogleCodeExporter]

Try to update to latest version of both c9x and opentx

Original comment by romolo.m...@gmail.com on 2 Sep 2013 at 8:27

[GoogleCodeExporter]

Please specify selected options:
The issue cannot reproduced in c9x 1.47 + opentx 2751

Original comment by romolo.m...@gmail.com on 3 Sep 2013 at 12:16

[GoogleCodeExporter]

Hi,

I just updated everything, and it now works as expected! 

Thanks a lot! :-)

Original comment by extremf...@gmx.de on 3 Sep 2013 at 5:54

[GoogleCodeExporter]

Original comment by romolo.m...@gmail.com on 3 Sep 2013 at 5:58

• Changed state: Invalid