search

DeBesten / opentx

Automatically exported from code.google.com/p/opentx
0 stars 0 forks source link

Saving to eeprom delay #149

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago 
Which board (stock / gruvin9x / sky9x / Taranis) are you using?
stock
What is your openTx FW version?
2768
What is your openTx EEPROM version?
/
What steps will reproduce the problem?
1. Turn on Tx. I see timer screen.
2. Move screen for example to sticks travel
3. Turn off transmitter. The turn on transmitter again and you'll see timer 
screen again instead of sticks travel screen.

What is the expected output? What do you see instead?
In version 2751 settings was immediately saved.

Please provide any additional information below.

Original issue reported on code.google.com by marijan....@gmail.com on 26 Sep 2013 at 5:52

GoogleCodeExporter commented 8 years ago 
And onother thing. For example you have two models saved in Tx. Then 
select/load from one model to the other and turn off Tx. Then turn on Tx again 
and you'll see that first models is selected instead.

Original comment by marijan....@gmail.com on 26 Sep 2013 at 5:55

GoogleCodeExporter commented 8 years ago 
Do you prefer the FW writes more often and destroys your EEPROM quicker?

Original comment by bson...@gmail.com on 26 Sep 2013 at 6:03

GoogleCodeExporter commented 8 years ago 
FYI the stock board has no soft power feature. And the EEPROM may take up to 
6ms/byte to be written ...

Original comment by bson...@gmail.com on 26 Sep 2013 at 6:05

GoogleCodeExporter commented 8 years ago 
In v2751 saving was quicker. But this info about destroying EEPROM is valuable.

Thanks!

Original comment by marijan....@gmail.com on 26 Sep 2013 at 6:20

GoogleCodeExporter commented 8 years ago 
I don't remember I changed anything since r2751 but I will check. I reopen the 
issue for that reason.

Original comment by bson...@gmail.com on 26 Sep 2013 at 6:27

GoogleCodeExporter commented 8 years ago 
I checked on a radio using both r2751 and r2768 and can not see a difference. 
Delay between the last modification and starting to save is the same 2 seconds, 
and actually saving will take another 1-3 seconds depending on things like the 
number of models, free space and model size.

Original comment by bernet.a...@gmail.com on 2 Oct 2013 at 8:24

GoogleCodeExporter commented 8 years ago

Original comment by bson...@gmail.com on 2 Oct 2013 at 5:58