show selected mix name

[GoogleCodeExporter]

Which board (stock / gruvin9x / sky9x / Taranis) are you using?
Taranis

What is your openTx FW version?
opentx-r2768

What is your openTx EEPROM version?
215

This request is to ad the currently selected "switch assigned" mix to a page.

For example if you have a two stabilisers (Drone and the camera gimbal). It 
would be great to see the currently selected mix and the flight mode on one 
page together with the assigned switch name (Sc, Se...)

Thanks for the amazing software!

Original issue reported on code.google.com by dehigama on 1 Oct 2013 at 8:16

[GoogleCodeExporter]

I don't understand where you would want that to be put?

Original comment by bernet.a...@gmail.com on 2 Oct 2013 at 8:17

[GoogleCodeExporter]

Possibly in the main page where we see the name on the currently selected 
flight mode.  Or Ideally a new dedicated page showing the selected mix names 
and the flight mode, to make the screen less cluttered.
thanks.

Original comment by dehigama on 2 Oct 2013 at 9:02

[GoogleCodeExporter]

really?

Original comment by bson...@gmail.com on 2 Oct 2013 at 9:03

[GoogleCodeExporter]

yes really :) but I guess this feature would require a major overhaul of the 
firmware just to help people with over complicated setups to not to select the 
wrong mix during flight :)  sorry for my ignorance.

Original comment by dehigama on 2 Oct 2013 at 9:39

[GoogleCodeExporter]

I suggest something a little different - ability to store "Notes" with each 
model.
Just put a text file with the same name as the model on the card, with some 
text you write like what switch and what pot does what. 

This can then be selected to show automatically on model load, and then be 
accessible directly from everywhere in the menus like the channel monitor. 

Easy to implement, and easy to put exactly the description you want to remind 
you on the specifics of a model. 

Original comment by bernet.a...@gmail.com on 2 Oct 2013 at 10:35

[GoogleCodeExporter]

that is cool bernet, just like a pilots kneebord.

Original comment by dehigama on 2 Oct 2013 at 1:13

[GoogleCodeExporter]

Original comment by bernet.a...@gmail.com on 6 Oct 2013 at 9:47

• Changed state: Started

[GoogleCodeExporter]

While the OpenTx wizards work on this, you can use software like Balabolka to 
convert  the text with the info you need to speech, save the wav file, and set 
a custom function to read the file. I have attached a sample wav file with a 
hypothetical checklist. 
I think it is cool to be able to have someone read to you, rather than having 
to read the screen yourself...

Original comment by ululi1...@gmail.com on 18 Oct 2013 at 1:10

Attachments:

• preflight.wav

[GoogleCodeExporter]

thats really cool, thanks for sharing! thanks for the gurus who are making this 
feature possible.

Original comment by dehigama on 18 Oct 2013 at 3:33

[GoogleCodeExporter]

Will be in next major release

Original comment by bson...@gmail.com on 7 Nov 2013 at 1:57

• Changed state: Fixed