Strange things happening with Companion9x & Taranis

[GoogleCodeExporter]

I posted this in open RC forums 
(http://openrcforums.com/forum/viewtopic.php?f=96&t=3945#p57074) and was 
directed here

This is was my message . . .

If you set the name of a channel on the limits tab and the channel before it 
does not have any mixing then both those channels are given the same name.

Also when you upload the EEPROM from the Taranis any GV in mixing weight is set 
to ---

Please see attached files

Original issue reported on code.google.com by keith.wd...@gtempaccount.com on 29 Jul 2013 at 7:44

Attachments:

• [Slight Problems.zip](https://storage.googleapis.com/google-code-attachments/opentx/issue-81/comment-0/Slight Problems.zip)

[GoogleCodeExporter]

It's a c9x issue. Which is fixed on SVN now.

Original comment by bson...@gmail.com on 30 Jul 2013 at 10:13

• Changed state: Invalid

[GoogleCodeExporter]

Thank you for correcting this problem even though you say the issue is
invalid

Original comment by keith.wd...@gtempaccount.com on 31 Jul 2013 at 7:28

[GoogleCodeExporter]

yes it was invalid as it was not a opentx issue but a companion9x one.

Original comment by romolo.m...@gmail.com on 31 Jul 2013 at 8:26

[GoogleCodeExporter]

Ok I hadn't appreciated that there was a difference

Original comment by keith.wd...@gtempaccount.com on 31 Jul 2013 at 8:50

[GoogleCodeExporter]

Companion is the software running on PC.
If the radio works and companion reads/writes bad data it's a companion issue.
If the radio doesn't work is an opentx one.

That's the main difference.
Then being the developer team mostly the same between the two apps, it's 
obvious that Bertrand has read the issue and applied the fix in companion9x, 
but that's another story. :)

Original comment by romolo.m...@gmail.com on 31 Jul 2013 at 9:29