Errors in auto generated Verilog code in Lab4_hardware

[ih8gin]

• Lots of error raised when try to run top/hardware/sim/build.sh following the instruction in lab4_hardware.
• Detail of error message is below, seems there are conflicts in auto generated .sv files.

  %Warning-MODDUP: top/hardware/sim/verilog/fc1_bias.sv:9:8: Duplicate declaration of module: 'fc1_bias_rom'
  9 | module fc1_bias_rom #(
    |        ^~~~~~~~~~~~
               top/hardware/rtl/fc1_bias.sv:9:8: ... Location of original declaration
  9 | module fc1_bias_rom #(
    |        ^~~~~~~~~~~~
               ... For warning description see https://verilator.org/warn/MODDUP?v=5.020
               ... Use "/* verilator lint_off MODDUP */" and lint_on around source to disable this message.
  %Warning-MODDUP: top/hardware/sim/verilog/fc1_bias.sv:36:8: Duplicate declaration of module: 'fc1_bias'
  36 | module fc1_bias #(
    |        ^~~~~~~~
               top/hardware/rtl/fc1_bias.sv:36:8: ... Location of original declaration
  36 | module fc1_bias #(
    |        ^~~~~~~~
  %Warning-MODDUP: top/hardware/sim/verilog/fc1_bias.sv:59:8: Duplicate declaration of module: 'fc1_bias_source'
  59 | module fc1_bias_source #(
    |        ^~~~~~~~~~~~~~~
               top/hardware/rtl/fc1_bias.sv:59:8: ... Location of original declaration
  59 | module fc1_bias_source #(
    |        ^~~~~~~~~~~~~~~
  %Warning-MODDUP: top/hardware/sim/verilog/fc1_weight.sv:9:8: Duplicate declaration of module: 'fc1_weight_rom'
  9 | module fc1_weight_rom #(
    |        ^~~~~~~~~~~~~~
               top/hardware/rtl/fc1_weight.sv:9:8: ... Location of original declaration
  9 | module fc1_weight_rom #(
    |        ^~~~~~~~~~~~~~
  %Warning-MODDUP: top/hardware/sim/verilog/fc1_weight.sv:36:8: Duplicate declaration of module: 'fc1_weight'
  36 | module fc1_weight #(
    |        ^~~~~~~~~~
               top/hardware/rtl/fc1_weight.sv:36:8: ... Location of original declaration
  36 | module fc1_weight #(
    |        ^~~~~~~~~~
  %Warning-MODDUP: top/hardware/sim/verilog/fc1_weight.sv:59:8: Duplicate declaration of module: 'fc1_weight_source'
  59 | module fc1_weight_source #(
    |        ^~~~~~~~~~~~~~~~~
               top/hardware/rtl/fc1_weight.sv:59:8: ... Location of original declaration
  59 | module fc1_weight_source #(
    |        ^~~~~~~~~~~~~~~~~
  %Warning-MODDUP: top/hardware/sim/verilog/fc2_bias.sv:9:8: Duplicate declaration of module: 'fc2_bias_rom'
  9 | module fc2_bias_rom #(
    |        ^~~~~~~~~~~~
               top/hardware/rtl/fc2_bias.sv:9:8: ... Location of original declaration
  9 | module fc2_bias_rom #(
    |        ^~~~~~~~~~~~
  %Warning-MODDUP: top/hardware/sim/verilog/fc2_bias.sv:36:8: Duplicate declaration of module: 'fc2_bias'
  36 | module fc2_bias #(
    |        ^~~~~~~~
               top/hardware/rtl/fc2_bias.sv:36:8: ... Location of original declaration
  36 | module fc2_bias #(
    |        ^~~~~~~~
  %Warning-MODDUP: top/hardware/sim/verilog/fc2_bias.sv:59:8: Duplicate declaration of module: 'fc2_bias_source'
  59 | module fc2_bias_source #(
    |        ^~~~~~~~~~~~~~~
               top/hardware/rtl/fc2_bias.sv:59:8: ... Location of original declaration
  59 | module fc2_bias_source #(
    |        ^~~~~~~~~~~~~~~
  %Warning-MODDUP: top/hardware/sim/verilog/fc2_weight.sv:9:8: Duplicate declaration of module: 'fc2_weight_rom'
  9 | module fc2_weight_rom #(
    |        ^~~~~~~~~~~~~~
               top/hardware/rtl/fc2_weight.sv:9:8: ... Location of original declaration
  9 | module fc2_weight_rom #(
    |        ^~~~~~~~~~~~~~
  %Warning-MODDUP: top/hardware/sim/verilog/fc2_weight.sv:36:8: Duplicate declaration of module: 'fc2_weight'
  36 | module fc2_weight #(
    |        ^~~~~~~~~~
               top/hardware/rtl/fc2_weight.sv:36:8: ... Location of original declaration
  36 | module fc2_weight #(
    |        ^~~~~~~~~~
  %Warning-MODDUP: top/hardware/sim/verilog/fc2_weight.sv:59:8: Duplicate declaration of module: 'fc2_weight_source'
  59 | module fc2_weight_source #(
    |        ^~~~~~~~~~~~~~~~~
               top/hardware/rtl/fc2_weight.sv:59:8: ... Location of original declaration
  59 | module fc2_weight_source #(
    |        ^~~~~~~~~~~~~~~~~
  %Warning-MODDUP: top/hardware/sim/verilog/fc3_bias.sv:9:8: Duplicate declaration of module: 'fc3_bias_rom'
  9 | module fc3_bias_rom #(
    |        ^~~~~~~~~~~~
               top/hardware/rtl/fc3_bias.sv:9:8: ... Location of original declaration
  9 | module fc3_bias_rom #(
    |        ^~~~~~~~~~~~
  %Warning-MODDUP: top/hardware/sim/verilog/fc3_bias.sv:36:8: Duplicate declaration of module: 'fc3_bias'
  36 | module fc3_bias #(
    |        ^~~~~~~~
               top/hardware/rtl/fc3_bias.sv:36:8: ... Location of original declaration
  36 | module fc3_bias #(
    |        ^~~~~~~~
  %Warning-MODDUP: top/hardware/sim/verilog/fc3_bias.sv:59:8: Duplicate declaration of module: 'fc3_bias_source'
  59 | module fc3_bias_source #(
    |        ^~~~~~~~~~~~~~~
               top/hardware/rtl/fc3_bias.sv:59:8: ... Location of original declaration
  59 | module fc3_bias_source #(
    |        ^~~~~~~~~~~~~~~
  %Warning-MODDUP: top/hardware/sim/verilog/fc3_weight.sv:9:8: Duplicate declaration of module: 'fc3_weight_rom'
  9 | module fc3_weight_rom #(
    |        ^~~~~~~~~~~~~~
               top/hardware/rtl/fc3_weight.sv:9:8: ... Location of original declaration
  9 | module fc3_weight_rom #(
    |        ^~~~~~~~~~~~~~
  %Warning-MODDUP: top/hardware/sim/verilog/fc3_weight.sv:36:8: Duplicate declaration of module: 'fc3_weight'
  36 | module fc3_weight #(
    |        ^~~~~~~~~~
               top/hardware/rtl/fc3_weight.sv:36:8: ... Location of original declaration
  36 | module fc3_weight #(
    |        ^~~~~~~~~~
  %Warning-MODDUP: top/hardware/sim/verilog/fc3_weight.sv:59:8: Duplicate declaration of module: 'fc3_weight_source'
  59 | module fc3_weight_source #(
    |        ^~~~~~~~~~~~~~~~~
               top/hardware/rtl/fc3_weight.sv:59:8: ... Location of original declaration
  59 | module fc3_weight_source #(
    |        ^~~~~~~~~~~~~~~~~
  %Warning-MODDUP: top/hardware/sim/verilog/top.sv:8:8: Duplicate declaration of module: 'top'
  8 | module top #(
    |        ^~~
               top/hardware/rtl/top.sv:8:8: ... Location of original declaration
  8 | module top #(
    |        ^~~
  %Warning-PINMISSING: top/hardware/sim/verilog/top_tb.sv:148:7: Cell has missing pin: 'data_in_0'
  148 |   top AESL_inst_top(
    |       ^~~~~~~~~~~~~
  %Warning-PINMISSING: top/hardware/sim/verilog/top_tb.sv:148:7: Cell has missing pin: 'data_in_0_valid'
  148 |   top AESL_inst_top(
    |       ^~~~~~~~~~~~~
  %Warning-PINMISSING: top/hardware/sim/verilog/top_tb.sv:148:7: Cell has missing pin: 'data_in_0_ready'
  148 |   top AESL_inst_top(
    |       ^~~~~~~~~~~~~
  %Warning-PINMISSING: top/hardware/sim/verilog/top_tb.sv:148:7: Cell has missing pin: 'data_out_0'
  148 |   top AESL_inst_top(
    |       ^~~~~~~~~~~~~
  %Warning-PINMISSING: top/hardware/sim/verilog/top_tb.sv:148:7: Cell has missing pin: 'data_out_0_valid'
  148 |   top AESL_inst_top(
    |       ^~~~~~~~~~~~~
  %Warning-PINMISSING: top/hardware/sim/verilog/top_tb.sv:148:7: Cell has missing pin: 'data_out_0_ready'
  148 |   top AESL_inst_top(
    |       ^~~~~~~~~~~~~
  %Error: top/hardware/rtl/top.sv:44:30: Can't find definition of variable: 'False'
  44 |     parameter relu_INPLACE = False,
    |                              ^~~~~
  %Error: top/hardware/rtl/top.sv:130:58: Can't find definition of variable: 'fc3_DATA_OUT_0_PARALLELISM_DIM_2'
                                    : ... Suggested alternative: 'fc3_DATA_OUT_0_PARALLELISM_0_DIM_2'
  130 |     output  [fc3_DATA_OUT_0_PRECISION_0-1:0] data_out_0 [fc3_DATA_OUT_0_PARALLELISM_DIM_2*fc3_DATA_OUT_0_PARALLELISM_DIM_1*fc3_DATA_OUT_0_PARALLELISM_DIM_0-1:0],
    |                                                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  %Error: top/hardware/rtl/top.sv:130:91: Can't find definition of variable: 'fc3_DATA_OUT_0_PARALLELISM_DIM_1'
                                    : ... Suggested alternative: 'fc3_DATA_OUT_0_PARALLELISM_DIM_2'
  130 |     output  [fc3_DATA_OUT_0_PRECISION_0-1:0] data_out_0 [fc3_DATA_OUT_0_PARALLELISM_DIM_2*fc3_DATA_OUT_0_PARALLELISM_DIM_1*fc3_DATA_OUT_0_PARALLELISM_DIM_0-1:0],
    |                                                                                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  %Error: top/hardware/rtl/top.sv:130:124: Can't find definition of variable: 'fc3_DATA_OUT_0_PARALLELISM_DIM_0'
                                     : ... Suggested alternative: 'fc3_DATA_OUT_0_PARALLELISM_DIM_1'
  130 |     output  [fc3_DATA_OUT_0_PRECISION_0-1:0] data_out_0 [fc3_DATA_OUT_0_PARALLELISM_DIM_2*fc3_DATA_OUT_0_PARALLELISM_DIM_1*fc3_DATA_OUT_0_PARALLELISM_DIM_0-1:0],
    |                                                                                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  %Error: top/hardware/rtl/top.sv:138:8: Can't find definition of variable: 'fc1_IN_0_PRECISION_0'
                                   : ... Suggested alternative: 'fc1_BIAS_PRECISION_0'
  138 | logic [fc1_IN_0_PRECISION_0-1:0]  fc1_data_in_0        [fc1_IN_0_TENSOR_SIZE_DIM_0-1:0];
    |        ^~~~~~~~~~~~~~~~~~~~
  %Error: top/hardware/rtl/top.sv:138:57: Can't find definition of variable: 'fc1_IN_0_TENSOR_SIZE_DIM_0'
                                    : ... Suggested alternative: 'fc1_BIAS_TENSOR_SIZE_DIM_0'
  138 | logic [fc1_IN_0_PRECISION_0-1:0]  fc1_data_in_0        [fc1_IN_0_TENSOR_SIZE_DIM_0-1:0];
    |                                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~
  %Error: top/hardware/rtl/top.sv:147:8: Can't find definition of variable: 'fc1_OUT_0_PRECISION_0'
                                   : ... Suggested alternative: 'fc1_IN_0_PRECISION_0'
  147 | logic [fc1_OUT_0_PRECISION_0-1:0]  fc1_data_out_0        [fc1_OUT_0_TENSOR_SIZE_DIM_0-1:0];
    |        ^~~~~~~~~~~~~~~~~~~~~
  %Error: top/hardware/rtl/top.sv:147:59: Can't find definition of variable: 'fc1_OUT_0_TENSOR_SIZE_DIM_0'
                                    : ... Suggested alternative: 'fc1_IN_0_TENSOR_SIZE_DIM_0'
  147 | logic [fc1_OUT_0_PRECISION_0-1:0]  fc1_data_out_0        [fc1_OUT_0_TENSOR_SIZE_DIM_0-1:0];
    |                                                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~
  %Error: top/hardware/rtl/top.sv:153:8: Can't find definition of variable: 'relu_IN_0_PRECISION_0'
                                   : ... Suggested alternative: 'fc1_IN_0_PRECISION_0'
  153 | logic [relu_IN_0_PRECISION_0-1:0]  relu_data_in_0        [relu_IN_0_TENSOR_SIZE_DIM_0-1:0];
    |        ^~~~~~~~~~~~~~~~~~~~~
  %Error: top/hardware/rtl/top.sv:153:59: Can't find definition of variable: 'relu_IN_0_TENSOR_SIZE_DIM_0'
                                    : ... Suggested alternative: 'fc1_IN_0_TENSOR_SIZE_DIM_0'
  153 | logic [relu_IN_0_PRECISION_0-1:0]  relu_data_in_0        [relu_IN_0_TENSOR_SIZE_DIM_0-1:0];
    |                                                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~
  %Error: top/hardware/rtl/top.sv:156:8: Can't find definition of variable: 'relu_OUT_0_PRECISION_0'
                                   : ... Suggested alternative: 'relu_IN_0_PRECISION_0'
  156 | logic [relu_OUT_0_PRECISION_0-1:0]  relu_data_out_0        [relu_OUT_0_TENSOR_SIZE_DIM_0-1:0];
    |        ^~~~~~~~~~~~~~~~~~~~~~
  %Error: top/hardware/rtl/top.sv:156:61: Can't find definition of variable: 'relu_OUT_0_TENSOR_SIZE_DIM_0'
                                    : ... Suggested alternative: 'relu_IN_0_TENSOR_SIZE_DIM_0'
  156 | logic [relu_OUT_0_PRECISION_0-1:0]  relu_data_out_0        [relu_OUT_0_TENSOR_SIZE_DIM_0-1:0];
    |                                                             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
  %Error: top/hardware/rtl/top.sv:162:8: Can't find definition of variable: 'fc2_IN_0_PRECISION_0'
                                   : ... Suggested alternative: 'fc1_IN_0_PRECISION_0'
  162 | logic [fc2_IN_0_PRECISION_0-1:0]  fc2_data_in_0        [fc2_IN_0_TENSOR_SIZE_DIM_0-1:0];
    |        ^~~~~~~~~~~~~~~~~~~~
  %Error: top/hardware/rtl/top.sv:162:57: Can't find definition of variable: 'fc2_IN_0_TENSOR_SIZE_DIM_0'
                                    : ... Suggested alternative: 'fc1_IN_0_TENSOR_SIZE_DIM_0'
  162 | logic [fc2_IN_0_PRECISION_0-1:0]  fc2_data_in_0        [fc2_IN_0_TENSOR_SIZE_DIM_0-1:0];
    |                                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~
  %Error: top/hardware/rtl/top.sv:171:8: Can't find definition of variable: 'fc2_OUT_0_PRECISION_0'
                                   : ... Suggested alternative: 'fc1_OUT_0_PRECISION_0'
  171 | logic [fc2_OUT_0_PRECISION_0-1:0]  fc2_data_out_0        [fc2_OUT_0_TENSOR_SIZE_DIM_0-1:0];
    |        ^~~~~~~~~~~~~~~~~~~~~
  %Error: top/hardware/rtl/top.sv:171:59: Can't find definition of variable: 'fc2_OUT_0_TENSOR_SIZE_DIM_0'
                                    : ... Suggested alternative: 'fc1_OUT_0_TENSOR_SIZE_DIM_0'
  171 | logic [fc2_OUT_0_PRECISION_0-1:0]  fc2_data_out_0        [fc2_OUT_0_TENSOR_SIZE_DIM_0-1:0];
    |                                                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~
  %Error: top/hardware/rtl/top.sv:177:8: Can't find definition of variable: 'relu_1_IN_0_PRECISION_0'
                                   : ... Suggested alternative: 'relu_IN_0_PRECISION_0'
  177 | logic [relu_1_IN_0_PRECISION_0-1:0]  relu_1_data_in_0        [relu_1_IN_0_TENSOR_SIZE_DIM_0-1:0];
    |        ^~~~~~~~~~~~~~~~~~~~~~~
  %Error: top/hardware/rtl/top.sv:177:63: Can't find definition of variable: 'relu_1_IN_0_TENSOR_SIZE_DIM_0'
                                    : ... Suggested alternative: 'relu_IN_0_TENSOR_SIZE_DIM_0'
  177 | logic [relu_1_IN_0_PRECISION_0-1:0]  relu_1_data_in_0        [relu_1_IN_0_TENSOR_SIZE_DIM_0-1:0];
    |                                                               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  %Error: top/hardware/rtl/top.sv:180:8: Can't find definition of variable: 'relu_1_OUT_0_PRECISION_0'
                                   : ... Suggested alternative: 'relu_OUT_0_PRECISION_0'
  180 | logic [relu_1_OUT_0_PRECISION_0-1:0]  relu_1_data_out_0        [relu_1_OUT_0_TENSOR_SIZE_DIM_0-1:0];
    |        ^~~~~~~~~~~~~~~~~~~~~~~~
  %Error: top/hardware/rtl/top.sv:180:65: Can't find definition of variable: 'relu_1_OUT_0_TENSOR_SIZE_DIM_0'
                                    : ... Suggested alternative: 'relu_OUT_0_TENSOR_SIZE_DIM_0'
  180 | logic [relu_1_OUT_0_PRECISION_0-1:0]  relu_1_data_out_0        [relu_1_OUT_0_TENSOR_SIZE_DIM_0-1:0];
    |                                                                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  %Error: top/hardware/rtl/top.sv:186:8: Can't find definition of variable: 'fc3_IN_0_PRECISION_0'
                                   : ... Suggested alternative: 'fc1_IN_0_PRECISION_0'
  186 | logic [fc3_IN_0_PRECISION_0-1:0]  fc3_data_in_0        [fc3_IN_0_TENSOR_SIZE_DIM_0-1:0];
    |        ^~~~~~~~~~~~~~~~~~~~
  %Error: top/hardware/rtl/top.sv:186:57: Can't find definition of variable: 'fc3_IN_0_TENSOR_SIZE_DIM_0'
                                    : ... Suggested alternative: 'fc1_IN_0_TENSOR_SIZE_DIM_0'
  186 | logic [fc3_IN_0_PRECISION_0-1:0]  fc3_data_in_0        [fc3_IN_0_TENSOR_SIZE_DIM_0-1:0];
    |                                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~
  %Error: top/hardware/rtl/top.sv:195:8: Can't find definition of variable: 'fc3_OUT_0_PRECISION_0'
                                   : ... Suggested alternative: 'fc1_OUT_0_PRECISION_0'
  195 | logic [fc3_OUT_0_PRECISION_0-1:0]  fc3_data_out_0        [fc3_OUT_0_TENSOR_SIZE_DIM_0-1:0];
    |        ^~~~~~~~~~~~~~~~~~~~~
  %Error: top/hardware/rtl/top.sv:195:59: Can't find definition of variable: 'fc3_OUT_0_TENSOR_SIZE_DIM_0'
                                    : ... Suggested alternative: 'fc1_OUT_0_TENSOR_SIZE_DIM_0'
  195 | logic [fc3_OUT_0_PRECISION_0-1:0]  fc3_data_out_0        [fc3_OUT_0_TENSOR_SIZE_DIM_0-1:0];
    |                                                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~
  %Error-PINNOTFOUND: top/hardware/rtl/top.sv:255:2: Parameter not found: 'WEIGHT_PRECISION_0'
  255 | .WEIGHT_PRECISION_0(fc1_WEIGHT_PRECISION_0),
    |  ^~~~~~~~~~~~~~~~~~
  %Error-PINNOTFOUND: top/hardware/rtl/top.sv:256:2: Parameter not found: 'WEIGHT_TENSOR_SIZE_DIM_0'
  256 | .WEIGHT_TENSOR_SIZE_DIM_0(fc1_WEIGHT_TENSOR_SIZE_DIM_0),
    |  ^~~~~~~~~~~~~~~~~~~~~~~~
  %Error-PINNOTFOUND: top/hardware/rtl/top.sv:257:2: Parameter not found: 'WEIGHT_PARALLELISM_DIM_0'
  257 | .WEIGHT_PARALLELISM_DIM_0(fc1_WEIGHT_PARALLELISM_DIM_0),
    |  ^~~~~~~~~~~~~~~~~~~~~~~~
  %Error-PINNOTFOUND: top/hardware/rtl/top.sv:258:2: Parameter not found: 'WEIGHT_TENSOR_SIZE_DIM_1'
  258 | .WEIGHT_TENSOR_SIZE_DIM_1(fc1_WEIGHT_TENSOR_SIZE_DIM_1),
    |  ^~~~~~~~~~~~~~~~~~~~~~~~
  %Error-PINNOTFOUND: top/hardware/rtl/top.sv:259:2: Parameter not found: 'WEIGHT_PARALLELISM_DIM_1'
  259 | .WEIGHT_PARALLELISM_DIM_1(fc1_WEIGHT_PARALLELISM_DIM_1),
    |  ^~~~~~~~~~~~~~~~~~~~~~~~
  %Error-PINNOTFOUND: top/hardware/rtl/top.sv:260:2: Parameter not found: 'WEIGHT_TENSOR_SIZE_DIM_2'
  260 | .WEIGHT_TENSOR_SIZE_DIM_2(fc1_WEIGHT_TENSOR_SIZE_DIM_2),
    |  ^~~~~~~~~~~~~~~~~~~~~~~~
  %Error-PINNOTFOUND: top/hardware/rtl/top.sv:261:2: Parameter not found: 'WEIGHT_PARALLELISM_DIM_2'
  261 | .WEIGHT_PARALLELISM_DIM_2(fc1_WEIGHT_PARALLELISM_DIM_2)
    |  ^~~~~~~~~~~~~~~~~~~~~~~~
  %Error-PINNOTFOUND: top/hardware/rtl/top.sv:271:2: Parameter not found: 'BIAS_PRECISION_0'
  271 | .BIAS_PRECISION_0(fc1_BIAS_PRECISION_0),
    |  ^~~~~~~~~~~~~~~~
  %Error-PINNOTFOUND: top/hardware/rtl/top.sv:272:2: Parameter not found: 'BIAS_TENSOR_SIZE_DIM_0'
  272 | .BIAS_TENSOR_SIZE_DIM_0(fc1_BIAS_TENSOR_SIZE_DIM_0),
    |  ^~~~~~~~~~~~~~~~~~~~~~
  %Error-PINNOTFOUND: top/hardware/rtl/top.sv:273:2: Parameter not found: 'BIAS_PARALLELISM_DIM_0'
  273 | .BIAS_PARALLELISM_DIM_0(fc1_BIAS_PARALLELISM_DIM_0),
    |  ^~~~~~~~~~~~~~~~~~~~~~
  %Error-PINNOTFOUND: top/hardware/rtl/top.sv:274:2: Parameter not found: 'BIAS_TENSOR_SIZE_DIM_1'
  274 | .BIAS_TENSOR_SIZE_DIM_1(fc1_BIAS_TENSOR_SIZE_DIM_1),
    |  ^~~~~~~~~~~~~~~~~~~~~~
  %Error-PINNOTFOUND: top/hardware/rtl/top.sv:275:2: Parameter not found: 'BIAS_PARALLELISM_DIM_1'
  275 | .BIAS_PARALLELISM_DIM_1(fc1_BIAS_PARALLELISM_DIM_1),
    |  ^~~~~~~~~~~~~~~~~~~~~~
  %Error-PINNOTFOUND: top/hardware/rtl/top.sv:276:2: Parameter not found: 'BIAS_TENSOR_SIZE_DIM_2'
  276 | .BIAS_TENSOR_SIZE_DIM_2(fc1_BIAS_TENSOR_SIZE_DIM_2),
    |  ^~~~~~~~~~~~~~~~~~~~~~
  %Error-PINNOTFOUND: top/hardware/rtl/top.sv:277:2: Parameter not found: 'BIAS_PARALLELISM_DIM_2'
  277 | .BIAS_PARALLELISM_DIM_2(fc1_BIAS_PARALLELISM_DIM_2)
    |  ^~~~~~~~~~~~~~~~~~~~~~
  %Error-PINNOTFOUND: top/hardware/rtl/top.sv:372:2: Parameter not found: 'WEIGHT_PRECISION_0'
  372 | .WEIGHT_PRECISION_0(fc2_WEIGHT_PRECISION_0),
    |  ^~~~~~~~~~~~~~~~~~
  %Error-PINNOTFOUND: top/hardware/rtl/top.sv:373:2: Parameter not found: 'WEIGHT_TENSOR_SIZE_DIM_0'
  373 | .WEIGHT_TENSOR_SIZE_DIM_0(fc2_WEIGHT_TENSOR_SIZE_DIM_0),
    |  ^~~~~~~~~~~~~~~~~~~~~~~~
  %Error-PINNOTFOUND: top/hardware/rtl/top.sv:374:2: Parameter not found: 'WEIGHT_PARALLELISM_DIM_0'
  374 | .WEIGHT_PARALLELISM_DIM_0(fc2_WEIGHT_PARALLELISM_DIM_0),
    |  ^~~~~~~~~~~~~~~~~~~~~~~~
  %Error-PINNOTFOUND: top/hardware/rtl/top.sv:375:2: Parameter not found: 'WEIGHT_TENSOR_SIZE_DIM_1'
  375 | .WEIGHT_TENSOR_SIZE_DIM_1(fc2_WEIGHT_TENSOR_SIZE_DIM_1),
    |  ^~~~~~~~~~~~~~~~~~~~~~~~
  %Error-PINNOTFOUND: top/hardware/rtl/top.sv:388:2: Parameter not found: 'BIAS_PRECISION_0'
  388 | .BIAS_PRECISION_0(fc2_BIAS_PRECISION_0),
    |  ^~~~~~~~~~~~~~~~
  %Error-PINNOTFOUND: top/hardware/rtl/top.sv:389:2: Parameter not found: 'BIAS_TENSOR_SIZE_DIM_0'
  389 | .BIAS_TENSOR_SIZE_DIM_0(fc2_BIAS_TENSOR_SIZE_DIM_0),
    |  ^~~~~~~~~~~~~~~~~~~~~~
  %Error-PINNOTFOUND: top/hardware/rtl/top.sv:390:2: Parameter not found: 'BIAS_PARALLELISM_DIM_0'
  390 | .BIAS_PARALLELISM_DIM_0(fc2_BIAS_PARALLELISM_DIM_0),
    |  ^~~~~~~~~~~~~~~~~~~~~~
  %Error-PINNOTFOUND: top/hardware/rtl/top.sv:391:2: Parameter not found: 'BIAS_TENSOR_SIZE_DIM_1'
  391 | .BIAS_TENSOR_SIZE_DIM_1(fc2_BIAS_TENSOR_SIZE_DIM_1),
    |  ^~~~~~~~~~~~~~~~~~~~~~
  %Error-PINNOTFOUND: top/hardware/rtl/top.sv:392:2: Parameter not found: 'BIAS_PARALLELISM_DIM_1'
  392 | .BIAS_PARALLELISM_DIM_1(fc2_BIAS_PARALLELISM_DIM_1),
    |  ^~~~~~~~~~~~~~~~~~~~~~
  %Error: Exiting due to too many errors encountered; --error-limit=50

[zniihgnexy]

same error here

[jianyicheng]

Hi sorry about the delay. The instructions for lab 4 were not updated. We have now updated them in https://github.com/DeepWok/mase/pull/32

Could you pull from the main branch and follow the new instructions?

[ih8gin]

Hi sorry about the delay. The instructions for lab 4 were not updated. We have now updated them in #32

Could you pull from the main branch and follow the new instructions?

It works now. Many thanks.