Closed GoogleCodeExporter closed 9 years ago
Test using the latest version :
Sent a 1.62gb file using passive mode
Transfer started at 6.65 mbps.
Finished at 4mbps with an average of 4.78mbps.
Original comment by hell...@gmail.com
on 5 Mar 2010 at 1:39
Writing on usb0, does not seem to do the same thing on hdd
Original comment by hell...@gmail.com
on 5 Mar 2010 at 2:16
Got something really strange... I've setted buffer to 128kb, init network with
128kb
packet size for up/down transfer.
Got constant 7.85mbps transfer until there's 444MB tranferred, then it drop to
2.80mbps...
Original comment by hell...@gmail.com
on 5 Mar 2010 at 3:30
Thought it was just my setup. Anytime a file reaches exactly 180mb transferred
it
goes from a steady 5mbps to 1.44mbps and eventually to 540kb/s - 700kb/s.
Tried with passive on/off
Tried direct connection to pc
Tried transferring to hdd1 and usb0
Same results.
Original comment by thrax...@gmail.com
on 6 Mar 2010 at 9:43
Transfer to hdd1 should be fine, are you sure it did this for you?
Original comment by hell...@gmail.com
on 7 Mar 2010 at 5:43
I have the same issue, but only on usb0 (a 500gb hdd is hooked up). Got constant
transferrates, but it's decreasing dramatically to 500-800kb/s after a few
hundred
mb's of a single, large file. To be sure that USB is NOT causing this issue, i
already transferred from hdd0 to usb0 with no speed decreasing issues. It's ONLY
affecting FTP Upload!
Original comment by schaddeg...@gmail.com
on 9 Mar 2010 at 9:50
Original comment by workerbe
on 12 Jul 2011 at 6:14
Original issue reported on code.google.com by
hell...@gmail.com
on 5 Mar 2010 at 1:29