Closed denhoy81 closed 2 years ago
Yes, it does.
i am having a terrible time making this work i think i have tried everything but i am new to this it starts, mills for a minute then stops works longer everytime but never in the same spot
HELP!
Hello, To advise anything useful it would be good to know the details about your CNC (model, firmware, etc).
For now, I guess you are running Windows 11. One of the possible reason of the behavior you have described is unreliable CNC control board power or USB connection.
Thank you for replying! I have a vevor 3018 prover Sent from my iPhone
On Oct 16, 2023, at 3:39 AM, Max @.***> wrote:
Hello, To advise anything useful it would be good to know the details about your CNC (model, firmware, etc).
For now, I guess you are running Windows 11. One of the possible reason of the behavior you have described is unreliable CNC control board power or USB connection.
— Reply to this email directly, view it on GitHubhttps://github.com/Denvi/Candle/issues/545#issuecomment-1763901776, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BDJI5Y3LIGWDYNGT4HBVIADX7TQDRAVCNFSM5STJGRH2U5DIOJSWCZC7NNSXTN2JONZXKZKDN5WW2ZLOOQ5TCNZWGM4TAMJXG43A. You are receiving this because you commented.Message ID: @.***>
I read some more into some possible issues and decreased the windows running system to run windows eight for this particular product. It states it can run at 11, 10… But I am having trouble with issues that it is stopping. I will try this morning and see how it runs on windows eight and, let you know how I do. Thank you so much for your quick reply. I honestly didn’t know if anyone would reply since this thread is so outdated. Sent from my iPhone
On Oct 17, 2023, at 6:53 AM, Lisa Rafuse @.***> wrote:
Thank you for replying! I have a vevor 3018 prover Sent from my iPhone
On Oct 16, 2023, at 3:39 AM, Max @.***> wrote:
Hello, To advise anything useful it would be good to know the details about your CNC (model, firmware, etc).
For now, I guess you are running Windows 11. One of the possible reason of the behavior you have described is unreliable CNC control board power or USB connection.
— Reply to this email directly, view it on GitHubhttps://github.com/Denvi/Candle/issues/545#issuecomment-1763901776, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BDJI5Y3LIGWDYNGT4HBVIADX7TQDRAVCNFSM5STJGRH2U5DIOJSWCZC7NNSXTN2JONZXKZKDN5WW2ZLOOQ5TCNZWGM4TAMJXG43A. You are receiving this because you commented.Message ID: @.***>
Does Candle work on windows 11?