search

DeskPi-Team / deskpi

DeskPi Pro is the Ultimate Case Kit for Raspberry Pi 4 with Full Size HDMI/2.5 Hard Disk Support and Safe Power Button, It has QC 3.0 Power Supply inside and New ICE Tower Cooler inside.
GNU General Public License v3.0
145 stars 46 forks source link

Same thing as "DeskPi Pro with update boards - SSD not working. #43" #151

Closed cal1br8tr closed 6 months ago

cal1br8tr commented 1 year ago

I just bought a deskpi-pro with a m2 NVME SSD adapter card but it has the same problem. If I plug the same drive in to the pi via a USB adapter then it boots fine. If going through the USB U-link, all I see is:

/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M |__ Port 1: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 5000M

did the flash update on the adapter, checked the physical. Using the disks app it sees the drive but states no media.

The ssd board shows a white light but only when the USB U-link is plugged in. What is the purpose of the touch points to the gpio pins?

When using a standard deskpi case with a 5V 4A 20W power supply, I still get the voltage error.

Couple of different issues but seems like this product is going in the junk drawer.

john-clark commented 10 months ago

Same.

yoyojacky commented 6 months ago

Oh, DeskPi pro supports SATA SSD Only. please try to change it to SATA SSD and try again please.