search

DeskPi-Team / deskpi

DeskPi Pro is the Ultimate Case Kit for Raspberry Pi 4 with Full Size HDMI/2.5 Hard Disk Support and Safe Power Button, It has QC 3.0 Power Supply inside and New ICE Tower Cooler inside.
GNU General Public License v3.0
143 stars 46 forks source link

No SSD #94

Closed Swifster closed 3 months ago

Swifster commented 2 years ago

new Pidesk installation new RPI4 tested with both Buster and Bullseye

Did a update of Deskpi firmware and nothing no disk shows up. Now raw disk, no formatted disk, no disk with image, nothing. [ 78.255076] usb 1-1.1: device descriptor read/64, error -110 [ 80.164710] usb usb2-port1: Cannot enable. Maybe the USB cable is bad?

No disk shows up when i plug the usb adapter or us a extra cable. It only shows up when i plug it to the lower USB 3 on the raspberry. usb 2-2: new SuperSpeed Gen 1 USB device number 9 using xhci_hcd [ 487.147990] usb 2-2: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00 [ 487.148010] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 487.148027] usb 2-2: Product: Pro [ 487.148054] usb 2-2: Manufacturer: DeskPi [ 487.148068] usb 2-2: SerialNumber: 002020110210

jojobrogess commented 2 years ago

Ermmmm. Try to see if you can update the daughter board using the supplied zip. That's my best suggestion

Swifster commented 1 year ago

Hi

Problem was the PI there was issue with the usb 3 ports. I went over the solder point’s with hot iron and afterwards al was working.