search

DevKitty-io / USB-Nugget

Run DuckyScript payloads on a USB Nugget!
https://usbnugget.com
MIT License
156 stars 18 forks source link

USB Nugget software doesn't run on the ESP8266 / WiFi Nugget #31

Closed Adamv7 closed 2 years ago

Adamv7 commented 2 years ago

I did the esptool method to update. Step by step via Linux. Last step to unplug and it should update itself was where it went south. Doesn't turn on anymore.

Adamv7 commented 2 years ago

Use the chrome method

HeinrichII commented 2 years ago

I have the 2.1 nugget board, which it seems has no ZERO button. I was following the chrome update procedure on an MX Linux lapton. It erased fine, And I used the esp web flasher, which has a banner that says it's not supported anymore. I pressed on anyway, and it seemed to program fine...green bar all the way across, then when finished I noticed the bright green LED turned off, and following instructions, I unplugged it (instead of hitting the disconnect button). When I plugged it back in-nothing. so then I hit the reset button...still nothing. I reran the procedure using esp web flasher, even though the banner directed to go to esptool. same end result as above. So then I tried the ESPtool, which is not only a terminal version, but they now have a web flash version also-so used that. Same end result. Feels like I've bricked this little unit. P.S. the blue led on the espy board blinks on connection and while hitting the reset button, so it's getting power, also when I plug it into either a windows box or linux, still just a dead little cat. ;(

brandonpaiz commented 2 years ago

Hi @HeinrichII, Here is a picture of where you can find the ZERO button: https://i.imgur.com/rtSSVuv.jpg. Please try again, as the ESP web flasher is known working as of yesterday. If you're still having issues, please let us know! I'd be happy to live-chat with you to get this resolved. Thanks!

HeinrichII commented 2 years ago

brandonpaiz, I've got the nugget 2.1 mainboard with the D1 mini riser with the ESP8266MOD flatpack on the D1 board on the riser. I'm assuming this is a new version, which probably needs updated flash/update procedures. Looking at the picture you sent, there is no switch at all in that area...I only have a reset button which is on the D1 mini riser board. Livechat would be great to resolve...I'm on signal, threema, and discord. In hindsight, I probably didn't need to do anything to the nugget, but probably eventually would need to flash an update. Thanks for your help.