I assembled a piece of AT1000 everything seems to work the power is correct the ROS is correct. But on some bands I notice a strange behavior, the tuner instead of choosing the lowest ROS stops at a high value. I see in the ros meter during the tuning that there are low values but it stops at high values. This only happens on some bands
I assembled a piece of AT1000 everything seems to work the power is correct the ROS is correct. But on some bands I notice a strange behavior, the tuner instead of choosing the lowest ROS stops at a high value. I see in the ros meter during the tuning that there are low values but it stops at high values. This only happens on some bands