Dfinitski
commented
2 years ago Hi You have to set up specific value to the flash cells for OLED running. By default LCD display works. Reed the manual, cells description.
Open OK1TK opened 2 years ago
Dfinitski
commented
2 years ago Hi You have to set up specific value to the flash cells for OLED running. By default LCD display works. Reed the manual, cells description.
Hi, I would like to ask you for an advice.
I finished the device but my OLED display is not working. The kit arrived with the smaller version of the OLED display but it doesn’t work even with larger one which I have at home. If I have 5V on VCC, DAT and CLK pin does it mean I did something wrong or the SW is set for the LED indication ?
Tuning. I connected my nanoVNA to the I/O of the tuner and started the test mode by pressing the BP+AUTO buttons. By pressing BP and AUTO buttons I was able to move between 43.5pF to 1.61nF but I was not able to move the inductamce part even with the long press of TUNE button.