Replacement for 10µF capacitors for breadboard?

DhrBaksteen / ArduinoOPL2

Arduino library for use with the OPL2 board (YM3812) and OPL3Duo (YMF262)

MIT License

195 stars 39 forks source link

Replacement for 10µF capacitors for breadboard? #52

Closed StarWolf3000 closed 4 years ago

StarWolf3000 commented 4 years ago

Hi,

before I'm going to gather and assemble everything on a PCB, I want to test the whole construct on a breadboard. Unfortunately, the only components I'm unable to get my hands on are the 10µF capacitors (not the electrolytic ones), C1 to C4 in the schematic/components list, for use on a breadboard.

Can they be substituted with some other capacitors or can I use electrolytic or tantal ones, with paying attention to the polarity?

DhrBaksteen commented 4 years ago

Hi,

You can also use regular electrolytic ones for C1 .. C4. For C1, C3 and C4 the negative pin is connected directly to ground. For C2 the + side is connected to R1 and the - side to VR1.