Seeding Report: Test Tray Seeding Summary Values

[braughtg]

When a Seeding Report that contains tray seedings is generated, a Tray Seeding Summary table appears below the table. This summary contains data that is computed from the data in the table.

This test must check that the values reported for the following quantities agree with the data in the table:

• [ ] - Total Number of Seeds Planted
• [ ] - Total Number of Trays
• [ ] - Total Hours
• [ ] - Average Seeds Planted/Hour

Notes:

• The report that is tested on must contain a minimum of 3 tray seeding logs.
• Every summary value must depend upon values in multiple logs.
• No summary value may be zero.
• The expected results should be hand computed from the sample data and hard coded in the test.

Additional Information:

Some additional notes relevant to this issue:

• The .spec.js file containing your test should be stored in an appropriate location and have a short but descriptive name. Use the locations and an naming from the "Good First issues" as examples.
• The .spec.js file should include a comment at the top that describes what the file as a whole is testing.
• The message for the describe should describe in a short phrase what the file is testing.
• After logging in and visiting the desired page the beforeEach method should call cy.waitForPage(). This will ensure that the page is fully loaded (e.g. that all the Maps used by the page are loaded) before performing any tests.
• It is not necessary to include a separate it for each of the things to be tested.
  • You should decide how to divide the things being tested into its so that each it tests a cohesive set of things.
  • The message for each it should describe in a short phrase what the it is testing.
• The .spec.js files in the farmdata2/farmdata2_modules/fd2_example/ sub-tabs (e.g. ui, api) may provide some helpful examples.
• These tests should utilize logs that are in the sample database. Information about the data contained in the sample database can be found in the "The Sample Database" section of the docker/sampleDB/README.md file.

---

Original issue by braughtg Tuesday Apr 11, 2023 at 04:44 GMT

[theahegde]

It is not clear by what "the sample data" refers too. Is this the data given in the Tree Seeding Summary Table? Could you please elaborate on where we can find this in FarmData. - Team Anaf

[braughtg]

It is not clear by what "the sample data" refers too. Is this the data given in the Tree Seeding Summary Table? Could you please elaborate on where we can find this in FarmData. - Team Anaf

The sample data is minimum of 3 tray seeding logs that appear in the main table in the report. The values that appear in the summary table are computed from these logs. You will need to manually compute the expected summary values from the table. Then use these manually calculated values as the expected values in your tests.

[anlai46]

Got it, so we are just comparing the expected values that we compute by hand for the four quantities with the actual summary values that are generated which is the sample data. Thanks for clarifying that for us. -Team Anaf