search

Dilbert66 / esphome-dsckeybus

Esphome custom configuration for interfacing to a DSC POWERSERIES alarm system
195 stars 37 forks source link

Secret 'access_code' not defined #83

Closed spplecxer closed 2 weeks ago

spplecxer commented 1 year ago

I have a DSC Power832 (PC5016 v 1.13). Copied the files. Edited to work with an ESP32 dev board. Tried to validate and got this error:

INFO Reading configuration /config/esphome/DscAlarm.yaml... ERROR Error while reading config: Invalid YAML syntax:

Secret 'access_code' not defined in "/config/esphome/DscAlarm.yaml", line 4, column 15: accessCode: !secret access_code #Only comes ...

spplecxer commented 1 year ago

Ok found it but leaving it here for others just in case. You have to add your secrets in the secrets yaml file.

virus100b commented 1 year ago

Hi, I have this running o nodemcu ESP 8266, what lines need to be modified in order to work with esp32 board? And another question, i cannot update the firmware over the air, with cable is working fine. It is compiling and then i et the following error.

RAM: [===== ] 47.2% (used 38660 bytes from 81920 bytes) Flash: [===== ] 50.0% (used 521805 bytes from 1044464 bytes) Building .pioenvs/dscalarm/firmware.bin esp8266_copy_factory_bin([".pioenvs/dscalarm/firmware.bin"], [".pioenvs/dscalarm/firmware.elf"]) ======================== [SUCCESS] Took 711.31 seconds ======================== INFO Successfully compiled program. INFO Resolving IP address of dscalarm.local INFO -> 192.168.1.125 INFO Uploading /data/build/dscalarm/.pioenvs/dscalarm/firmware.bin (525952 bytes) INFO Compressed to 364430 bytes Uploading: [== ] 3% ERROR Error sending data: [Errno 104] Connection reset by peer

What could be the issue?