Closed GoogleCodeExporter closed 9 years ago
You have a too reactive board ;) I don't see how to fix it right now...
Original comment by bson...@gmail.com
on 26 Aug 2012 at 8:50
;) no problem, that was just to point the thing.
Original comment by baptiste...@gadz.org
on 27 Aug 2012 at 3:30
I notice the same behaviour with r1291 on stock board, while all was OK on my
first testing of DBLKEYS feature on open9x (r1232 ?).
Original comment by f.ague...@wanadoo.fr
on 27 Aug 2012 at 7:25
I don't know if there is a link but i'm unable to perform a [MENU long] to get
a momentary switch instead of a normal switch on the function screen with
recent r1291.
(By the way, i like a lot this feature, thanks for adding it)
Original comment by baptiste...@gadz.org
on 27 Aug 2012 at 7:55
Do you have the AUTOSWITCH feature?
Original comment by bson...@gmail.com
on 27 Aug 2012 at 8:01
Yes, I use AUTOSWITCH...
Original comment by f.ague...@wanadoo.fr
on 27 Aug 2012 at 8:07
Sorry for the mess, i forgot to use AUTOSWITCH, now [MENU long] is OK for
momentary switches.
Original comment by baptiste...@gadz.org
on 27 Aug 2012 at 8:33
No problem, you will document it in french and english manual then ;)
Original comment by bson...@gmail.com
on 27 Aug 2012 at 8:37
Sorry, Bertrand, I thought that the question about the AUTOSWITCH was also for
me...
Original comment by f.ague...@wanadoo.fr
on 27 Aug 2012 at 9:09
Just to be sure, I've tested (r1322) DBLKEYS with and without AUTOSWITCH,
there's no change.
Original comment by f.ague...@wanadoo.fr
on 30 Aug 2012 at 1:18
An -small and simple...- idea : when editing a value, is it possible to add a
short delay (0.3s per example) when pressing one of the four buttons of the
arrows pad, in order let the time to take in account a second button for
DBLKEYS ?
Original comment by f.ague...@wanadoo.fr
on 30 Aug 2012 at 1:30
Original comment by bson...@gmail.com
on 4 Sep 2012 at 10:09
It seems that there is a problem on a sky9x board: a short left or right
keypress is acting like a DBLKEYS (instead of increasing or decreasing the
selected value you can just make it positive or negative)
I can make a small video if needed.
Original comment by baptiste...@gadz.org
on 4 Sep 2012 at 10:19
I was already notified. I am fixing it right now ...
Original comment by bson...@gmail.com
on 4 Sep 2012 at 10:22
Should be fixed now, would you check? Thanks!
Original comment by bson...@gmail.com
on 4 Sep 2012 at 10:41
Thanks a lot, the problem is gone, but DBLKEYS are impossible to perform now
(tried a lot whith a +/-)
Original comment by baptiste...@gadz.org
on 4 Sep 2012 at 10:53
Original comment by bson...@gmail.com
on 4 Sep 2012 at 12:11
Are you in EDIT mode? Before the +/- was possible even if !EDIT mode, but it
seems to me an incoherency. Either all are accepted, or none, not only one...
Original comment by bson...@gmail.com
on 4 Sep 2012 at 12:17
You're right, that was the reason:
If i go to the limit screen, select à subtrim and click [MENU] the number is
blinking and DBLKEYS works like a charm (very easy to perform, nice !)
If i go to the mixer screen, select a mixer value, this value is highlighted
but not blinking and DBLKEYS aren't available (that was the test i've done when
making my previous comment)
If i go to the "Edit mixer" screen and try the same with the ratio value it
works.
Original comment by baptiste...@gadz.org
on 4 Sep 2012 at 12:28
Oh I think you are right, I took the bad option, I should enable them always,
would you tell-me what you think of my next commit?
Original comment by bson...@gmail.com
on 4 Sep 2012 at 12:33
It's ok on the first mixer screen now, thank you.
Original comment by baptiste...@gadz.org
on 4 Sep 2012 at 12:55
Original issue reported on code.google.com by
baptiste...@gadz.org
on 24 Aug 2012 at 8:34