Closed GoogleCodeExporter closed 9 years ago
Was it ok in previous revision?
Original comment by bson...@gmail.com
on 27 Aug 2012 at 8:02
Is there another problem than ONm on startup (ONm is a little bit special)?
Original comment by bson...@gmail.com
on 27 Aug 2012 at 8:28
What release do you want me to try ?
I fly some of my models this weekend with r1266, everything was OK with voices,
i am very happy with this new feature !
Original comment by baptiste...@gadz.org
on 27 Aug 2012 at 8:29
Other momentary switches are repeated a lot at startup.
For example i have a !THRm to says "Engine secured", with r1266 it was played
once at startup, now it is repeated many times.
I can post a video if you want with the corresponding eeprom.
Original comment by baptiste...@gadz.org
on 27 Aug 2012 at 8:31
I've created a new model with only an announce on !THRm:
The wav is played 3 times at startup and 3 time if i switch THR and go back to
!THR
Original comment by baptiste...@gadz.org
on 27 Aug 2012 at 8:35
So it's not only at startup!
Original comment by bson...@gmail.com
on 27 Aug 2012 at 8:37
We know that r1266 is OK, and r1291 is KO, would it be possible you test r1279?
Because it's 1280 which brought the ID feature. Thanks!
Original comment by bson...@gmail.com
on 27 Aug 2012 at 8:43
r1279 compiled and flashed, voices are OK on sky9x board.
Original comment by baptiste...@gadz.org
on 27 Aug 2012 at 8:51
It was stupid bug, thanks for your help!
Original comment by bson...@gmail.com
on 27 Aug 2012 at 9:17
Thank you, now it's OK.
One of my previous switch is not working anymore but it's not critical:
The goal was to know my P3 position (gyro gain for example)
For that i had:
"SW7 |d|>=ofs P3 5" AND "SW7m Play value P3"
It was working quite ok when i was slowly rotating the pot (which is the usual
case when i'm tuning my gyro in flight), with r1295 it's mute now.
Original comment by baptiste...@gadz.org
on 27 Aug 2012 at 9:28
[deleted comment]
Well in fact there is a global issue: once a SW has been played, it won't be
anymore:
in fact SW7 was validated at startup so P3 value was announced but after it
won't be anymore.
It's the same thing with other switches, if i move a physical switch, the
associated voice is played, but if i revert it and move it back it will be
definitely mute.
Original comment by baptiste...@gadz.org
on 27 Aug 2012 at 9:34
oops I know why!
Original comment by bson...@gmail.com
on 27 Aug 2012 at 9:36
This 2nd bug should be fixed now
Original comment by bson...@gmail.com
on 27 Aug 2012 at 9:41
I confirm r1296 is OK, thank you.
The behaviour of my audio P3 annoucement is even better now: i can configure
"SW7 |d|>=ofs P3 1" and only the essentials values are played.
Original comment by baptiste...@gadz.org
on 27 Aug 2012 at 9:48
Yes, that was the idea of these IDs!
Cool!!!
Original comment by bson...@gmail.com
on 27 Aug 2012 at 9:51
Original issue reported on code.google.com by
baptiste...@gadz.org
on 27 Aug 2012 at 7:53