Closed GoogleCodeExporter closed 9 years ago
I wonder if it could be an error on the compilation server, relative to '128
processor
Did you try with the stock version?
Original comment by bson...@gmail.com
on 13 Feb 2013 at 2:45
I posted a message for huginen on the 9x forums. I don't know whether his
radio has the 64 or the 128 processor. Here is a link to the 9x forum:
http://9xforums.com/forum/viewtopic.php?f=23&t=994&p=39528#p39528
Original comment by gohs...@gmail.com
on 13 Feb 2013 at 3:37
I have a stock m64 board and can confirm the same issue
Original comment by davereyn...@gmail.com
on 13 Feb 2013 at 3:43
Issue on the compilation server
The syntax is:
make EXT=TELEMETREZ (it automatically enables FRSKY)
Original comment by bson...@gmail.com
on 13 Feb 2013 at 5:00
Should be solved, before marking as fixed i ask for a check.
I do not have telemetrez board for checking
Original comment by romolo.m...@gmail.com
on 13 Feb 2013 at 8:18
i can confirm that the issue is solved
//huginen
Original comment by hugi...@gmail.com
on 13 Feb 2013 at 8:31
Original comment by bson...@gmail.com
on 13 Feb 2013 at 8:32
i have exactly the same issue, and normaly the latest firmware
companion 9X 1.17, and firmware 1947...
does someone know how to solve it?
Regards
Original comment by barre...@gmail.com
on 14 Mar 2013 at 2:37
Did you choose the TelemetreZ option in c9x?
Original comment by bson...@gmail.com
on 14 Mar 2013 at 3:36
I have the THR and AIL switch warning issue as well. It is a new Turnigy 9x
with OpenTX r2940 flashed by Companion 9x (v 1.52, rev 2381), Smartieparts rev
2.4 board and latest Telemetrez board. I ticked on Telemetrez in C9x, along
with SP22 for my backlight.
Original comment by cjken...@gmail.com
on 30 Apr 2014 at 2:22
Have you updated the telemetrez to it's latest version? You can get it here ->
https://code.google.com/p/9x-telemetrez/
Original comment by gohs...@gmail.com
on 30 Apr 2014 at 12:15
My particular problem is now solved. I tried updating the telemetrez firmware
several times and kept getting "connect the target" and no success. That clued
me in (after reviewing the troubleshooting guide on the Smartieparts 9x
programmer website) that my issue may be lack of good contact between the SP
board and the 9x's main board. I tightened all the screws up and the switch
error has gone away! Thanks to you folks on this board and Steve at SP!
Original comment by cjken...@gmail.com
on 2 May 2014 at 3:14
Original issue reported on code.google.com by
gohs...@gmail.com
on 13 Feb 2013 at 1:49