FP0 (only) bold display not working in MIXER screen (r1197)

[GoogleCodeExporter]

What steps will reproduce the problem?

1. Set up three flight phases, FP0, FP1, FP2 (I used IDL1/2 for FP1/2)

2. Set up three mixer lines on same channel, each active for FP0, FP1, FP2 
only, in that order and with Weight set to 50, 80, 100 respectively.

3. Note that as flight phase switch is changed, only FP1 and FP2 display bold 
as they should, while FP0 never goes bold, even though correct FP0 function is 
confirmed by observing servo output (weights 50, 80 & 100.)

My test specifically looked like this (Channel order AETR) ...

------------------------
MIXER   6/32        5/11
CH1  Rud   50          0
 :=  Rud   80          1
 :=  Rud  100          2
CH2  Ele  100
CH3  Thr  100
CH4  Ail  100
CH5
------------------------

Phase configuration looked like this ...

------------------------
FLIGHT PHASES       3/11
FP0          (default)
FP1 A        ID1 RETAab
FP2 B        ID2 RETAab
FP3              RETAab
FP4              RETAab

Check FP0 Trims
------------------------

What is the expected output? What do you see instead?
The mixer line with FP0 should show bold when Flight Phase 0 (FP0) is active.

What version of the product are you using? On what operating system?
open9x-r1197
gruvin9x v4.2 board

Please provide any additional information below.
This issue brought to you by yet another case of gruvInsomnia

Original issue reported on code.google.com by gru...@gmail.com on 16 Aug 2012 at 3:23

[GoogleCodeExporter]

Flight Phases implementation reworked today, the bug disappeared!

Original comment by bson...@gmail.com on 16 Aug 2012 at 6:49

• Changed state: Fixed

[GoogleCodeExporter]

Wow. amazingly quick. I only had six hours sleep and when I wake up, it's fixed 
already. :-D

Original comment by gru...@gmail.com on 17 Aug 2012 at 12:11

[GoogleCodeExporter]

Original comment by gru...@gmail.com on 28 Aug 2012 at 12:49

• Changed state: Verified