DoNPiNPoN firmware-mod-kit issues

DoNPiNPoN / firmware-mod-kit

Firmware-mod-kit

1 stars 1 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

after edit ddwrt-gui's asp file,install error

#145 GoogleCodeExporter opened 9 years ago
0
Can not extract Huawei HG655b-B025 firmware

#144 GoogleCodeExporter opened 9 years ago
0
Failed to create new file system

#143 GoogleCodeExporter opened 9 years ago
0
Firmware Image Generated Different from Original when nothing changed for its extracted contents

#142 GoogleCodeExporter opened 9 years ago
0
Issue in extracting squashfs filesystem

#141 GoogleCodeExporter opened 9 years ago
0
Cannot extract firmware

#140 GoogleCodeExporter opened 9 years ago
0
Image fault when builidng Tomato for RT-AC68U

#139 GoogleCodeExporter opened 9 years ago
3
Extracted firmware and then tried to rebuild it and it became larger, probably because it didnt use lzma for recompress.

#138 GoogleCodeExporter opened 9 years ago
1
uncramfs-lzma stops after successfully decoding the first block

#137 GoogleCodeExporter opened 9 years ago
0
Wrong build

#136 GoogleCodeExporter opened 9 years ago
0
Can't unpack Zyxel NWA-3100 firmware

#135 GoogleCodeExporter opened 9 years ago
1
CramFS extraction failed due to missing cleaning up

#134 GoogleCodeExporter opened 9 years ago
0
new binwalk

#133 GoogleCodeExporter closed 9 years ago
1
jffs2 big endian problem

#132 GoogleCodeExporter opened 9 years ago
0
Can this firmeware be extracted?

#131 GoogleCodeExporter opened 9 years ago
2
Failure building image.

#130 GoogleCodeExporter opened 9 years ago
0
Extracting 0 bytes of header image at offset 0

#129 GoogleCodeExporter opened 9 years ago
1
wdr3600v1 firmware cannot be unpacked

#128 GoogleCodeExporter opened 9 years ago
1
Firmware header not supported; firmware checksums may be incorrect.

#127 GoogleCodeExporter opened 9 years ago
0
CRC update failed. Firmware header not supported; firmware checksums may be incorrect.

#126 GoogleCodeExporter opened 9 years ago
0
Added support for TP-Link v2 header firmware (TD-W8968v1)

#125 GoogleCodeExporter opened 9 years ago
2
CRC update failed

#124 GoogleCodeExporter opened 9 years ago
0
Failed to compile on gentoo

#123 GoogleCodeExporter closed 9 years ago
1
Issue in building firmware

#122 GoogleCodeExporter opened 9 years ago
0
unsquashfs segfault on 64bit machines

#121 GoogleCodeExporter opened 9 years ago
3
Compile error on gentoo x64 (glibc2.17)

#120 GoogleCodeExporter closed 9 years ago
4
Can't extract cpio archive from Securifi firmware.

#119 GoogleCodeExporter closed 9 years ago
4
Firmware support for linksys EA6700 firmware

#118 GoogleCodeExporter opened 9 years ago
1
Unsquashfs_all.sh fails to extract

#117 GoogleCodeExporter closed 9 years ago
3
Fail to flash OpenWrt Attitude Adjustment built with FMK

#116 GoogleCodeExporter opened 9 years ago
0
JFFS2 support

#115 GoogleCodeExporter opened 9 years ago
2
Ubiquiti M5 devices firmware rebuild

#114 GoogleCodeExporter opened 9 years ago
0
FMK image not loading on D-Link DIR-868L

#113 GoogleCodeExporter opened 9 years ago
2
rebuild firmware is too large

#112 GoogleCodeExporter opened 9 years ago
2
crcalc.c does not update all the trx information

#111 GoogleCodeExporter opened 9 years ago
1
-nopad switch causes checksum failure for trx image

#110 GoogleCodeExporter closed 9 years ago
2
CRC update failed

#109 GoogleCodeExporter closed 9 years ago
8
Can't rebuild the changed firmware

#108 GoogleCodeExporter opened 9 years ago
4
Add support for Billion / Telewell devices

#107 GoogleCodeExporter opened 9 years ago
0
footer.img checksum

#106 GoogleCodeExporter closed 9 years ago
1
Unknown Squashfs compression

#105 GoogleCodeExporter opened 9 years ago
6
Unchanged firmware output size doesn't match original size and bricks device

#104 GoogleCodeExporter opened 9 years ago
10
Firmwares larger than original due to squashfs-lzma not being detected by Binwalk

#103 GoogleCodeExporter closed 9 years ago
6
GUI Rebuild results in blank page

#102 GoogleCodeExporter closed 9 years ago
7
better include common.inc

#101 GoogleCodeExporter closed 9 years ago
1
GUI-Restore is not working -> "restore: Is a directory"

#100 GoogleCodeExporter closed 9 years ago
14
rebuild firmware

#99 GoogleCodeExporter closed 9 years ago
9
Use installed version of binwalk instead of outdated packed ones.

#98 GoogleCodeExporter closed 9 years ago
3
Support extraction of YAFFS

#97 GoogleCodeExporter closed 9 years ago
10
ubnt.com's AirCam support

#96 GoogleCodeExporter opened 9 years ago
8