KVM Image frozen at "No Signal"

DomiStyle / docker-idrac6

iDRAC 6 web interface and VNC proxy

https://hub.docker.com/r/domistyle/idrac6/

MIT License

778 stars 142 forks source link

KVM Image frozen at "No Signal" #73

Closed SteveButt closed 3 months ago

SteveButt commented 3 months ago

domistyle-idrac6.log I Installed using latest ( also tried v0.8 ) the console appears both in Web and VNC options.

The menu works to power on/off but the image of the console is stuck at the "No Signal" output I attached a monitor and see that the normal BIOS Screen and boot sequence are happening

Dell R210 II with IDrac 6 BIOS Version | 2.10.0 | Firmware Version | 2.90 (Build 04)

SteveButt commented 3 months ago

Resolved, The system concerned had a second Graphics card. Once removed and the BIOS was reset the output worked as expected.

SteveButt commented 3 months ago

Resolved, The system concerned had a second Graphics card. Once removed and the BIOS was reset the output worked as expected.