search

DomiStyle / esphome-panasonic-ac

Open source alternative for Panasonic air condition wifi adapters that works locally without the Comfort Cloud
MIT License
226 stars 58 forks source link

Add vertical swing mode swing (constantly moving up/down) #77

Closed toreamun closed 1 year ago

toreamun commented 1 year ago

My Panasonic HZ25XKE has a vertical swing mode where the flap constantly swings up/down (like in auto, except that in auto "Once the temperature is achieved, the horizontal flap is fixed at upper position"). I get an error in the log when this mode is selected:

[23:25:30][V][panasonic_ac:245]: TX: 70.0A.00.00.00.00.00.00.00.00.00.00.86 (13)
[23:25:30][V][panasonic_ac:247]: RX: 70.20.44.30.80.A0.ED.40.00.40.00.00.4C.32.00.00.00.00.17.01.1F.18.01.FF.80.80.FF.80.61.01.09.80.18.83.9D (35)
[23:25:30][W][panasonic_ac.cz_tacg1:374]: Received unknown vertical swing mode
[23:25:30][E][select:018]: 'Panasonic Vertical Swing Mode': invalid state for publish_state(): Unknown

The value of this mode is found by logging to be 0x0E.

DomiStyle commented 1 year ago

Will test this over the weekend, thanks.

DomiStyle commented 1 year ago

Does your AC have both an auto and a swing mode? Can you post a picture of your remote?

toreamun commented 1 year ago

Swing: image

Auto: image

toreamun commented 1 year ago

From the manual: image

First section is auto. Second is all the fixed directions. Last one is what I have called swing.

toreamun commented 1 year ago

Remote auto: image

Remote "swing": image

DomiStyle commented 1 year ago

Thanks! Didn't cause any issues on my units.