search

Doodle3D / print3d

The application that runs on a Doodle3D WiFi box that communicates with printers.
www.doodle3d.com
GNU General Public License v2.0
13 stars 4 forks source link

Ultimaker2+ stops printing when heated bed enabled #43

Closed peteruithoven closed 8 years ago

peteruithoven commented 8 years ago

Someone contacted us that his Ultimaker2+ stops printing, but only when heated bed is enabled.

Seeing the serial communication just stopped this looks a lot like the following issues:

Using loglite we filtered out the relevant parts, shape I can't export the colors. Ultimaker2+ met heated bed enabled:

...
15-03 13:34:48  [ABD] setState(): 3:idle > 5:printing
15-03 13:34:48  [ABD] printNextLine(): 0/498
15-03 13:34:48  [MLD] sendCode(): M109 S220 
15-03 13:34:49  [MLD] sendCode(): M105
15-03 13:34:49  [MLD] readCode(): 'T:188.6 E:0 W:?'
15-03 13:34:50  [MLD] readCode(): 'T:188.6 E:0 W:?'
15-03 13:34:51  [MLD] readCode(): 'T:188.3 E:0 W:?'
15-03 13:34:52  [MLD] readCode(): 'T:188.1 E:0 W:?'
15-03 13:34:53  [MLD] readCode(): 'T:189.2 E:0 W:?'
15-03 13:34:54  [MLD] sendCode(): M105
15-03 13:34:54  [MLD] readCode(): 'T:190.5 E:0 W:?'
15-03 13:34:55  [MLD] readCode(): 'T:191.6 E:0 W:?'
15-03 13:34:56  [MLD] readCode(): 'T:193.9 E:0 W:?'
15-03 13:34:57  [MLD] readCode(): 'T:196.3 E:0 W:?'
15-03 13:34:58  [MLD] readCode(): 'T:198.8 E:0 W:?'
15-03 13:34:59  [MLD] sendCode(): M105
15-03 13:34:59  [MLD] readCode(): 'T:201.7 E:0 W:?'
15-03 13:35:00  [MLD] readCode(): 'T:204.5 E:0 W:?'
15-03 13:35:01  [MLD] readCode(): 'T:208.4 E:0 W:?'
15-03 13:35:02  [MLD] readCode(): 'T:211.3 E:0 W:?'
15-03 13:35:03  [MLD] readCode(): 'T:214.5 E:0 W:?'
15-03 13:35:04  [MLD] sendCode(): M105
15-03 13:35:04  [MLD] readCode(): 'T:217.8 E:0 W:?'
15-03 13:35:05  [MLD] readCode(): 'T:220.7 E:0 W:2'
15-03 13:35:06  [MLD] readCode(): 'T:224.5 E:0 W:1'
15-03 13:35:07  [MLD] readCode(): 'T:226.2 E:0 W:0'
15-03 13:35:07  [MLD] readCode(): 'ok'
15-03 13:35:07  [ABD] printNextLine(): 1/9203
15-03 13:35:07  [MLD] sendCode(): M190 S65 
15-03 13:35:07  [MLD] readCode(): 'ok T:226.8 /220.0 B:54.7 /0.0 @:0 B@:0'
15-03 13:35:07  [MLD] readCode(): 'ok T:226.8 /220.0 B:54.7 /0.0 @:0 B@:0'
15-03 13:35:07  [MLD] readCode(): 'ok T:226.8 /220.0 B:54.7 /0.0 @:0 B@:0'
15-03 13:35:07  [MLD] readCode(): 'ok T:226.8 /220.0 B:54.7 /0.0 @:0 B@:0'
15-03 13:35:08  [MLD] readCode(): 'T:228.17 E:0 B:54.6'
15-03 13:35:09  [MLD] sendCode(): M105
15-03 13:35:09  [MLD] readCode(): 'T:230.00 E:0 B:54.4'
15-03 13:35:10  [MLD] readCode(): 'T:231.17 E:0 B:55.6'
15-03 13:35:11  [MLD] readCode(): 'T:231.67 E:0 B:55.4'
15-03 13:35:12  [MLD] readCode(): 'T:231.83 E:0 B:56.0'
15-03 13:35:13  [MLD] readCode(): 'T:231.00 E:0 B:55.7'
15-03 13:35:14  [MLD] sendCode(): M105
15-03 13:35:14  [MLD] readCode(): 'T:230.67 E:0 B:56.5'
15-03 13:35:15  [MLD] readCode(): 'T:230.17 E:0 B:56.0'
15-03 13:35:16  [MLD] readCode(): 'T:229.67 E:0 B:56.8'
15-03 13:35:17  [MLD] readCode(): 'T:228.67 E:0 B:56.5'
15-03 13:35:18  [MLD] readCode(): 'T:226.83 E:0 B:57.2'
15-03 13:35:19  [MLD] sendCode(): M105
15-03 13:35:24  [MLD] sendCode(): M105
15-03 13:35:29  [MLD] sendCode(): M105
15-03 13:35:34  [MLD] sendCode(): M105
15-03 13:35:39  [MLD] sendCode(): M105
15-03 13:35:45  [MLD] sendCode(): M105
15-03 13:35:50  [MLD] sendCode(): M105
15-03 13:35:55  [MLD] sendCode(): M105
15-03 13:36:00  [MLD] sendCode(): M105
15-03 13:36:05  [MLD] sendCode(): M105
15-03 13:36:10  [MLD] sendCode(): M105
15-03 13:36:15  [MLD] sendCode(): M105
15-03 13:36:20  [MLD] sendCode(): M105
15-03 13:36:25  [MLD] sendCode(): M105
15-03 13:36:30  [MLD] sendCode(): M105
15-03 13:36:35  [MLD] sendCode(): M105
15-03 13:36:38  [ABD] stopPrint(): with 392 bytes of end g-code
15-03 13:36:38  [ABD] resetPrint()
15-03 13:36:38  [ABD] setState(): 5:printing > 3:idle
15-03 13:36:38  [ABD] setState(): 3:idle > 4:buffering
15-03 13:36:38  [ABD] startPrint
15-03 13:36:38  [ABD] resetPrint()
15-03 13:36:38  [ABD] setState(): 4:buffering > 3:idle
15-03 13:36:38  [ABD] setState(): 3:idle > 6:stopping
15-03 13:36:38  [ABD] printNextLine(): 0/10
15-03 13:36:38  [MLD] sendCode(): M107 
15-03 13:36:40  [MLD] sendCode(): M105
15-03 13:36:45  [MLD] sendCode(): M105
15-03 13:36:50  [MLD] sendCode(): M105
15-03 13:36:55  [MLD] sendCode(): M105
15-03 13:37:01  [MLD] sendCode(): M105
15-03 13:37:06  [MLD] sendCode(): M105
15-03 13:37:11  [MLD] sendCode(): M105
15-03 13:37:16  [MLD] sendCode(): M105
15-03 13:37:21  [MLD] sendCode(): M105
15-03 13:37:26  [MLD] sendCode(): M105
15-03 13:37:31  [MLD] sendCode(): M105
15-03 13:37:36  [MLD] sendCode(): M105
...

um2+-wifibox-logs.zip um2go-wifibox-logs.zip (for comparison)

jeroensomers commented 8 years ago

Bought a UM2 + just to test things (returned afterwards)

Here are the Logfiles from the first test wifibox-logs.zip

Everything seems to be working fine, I guess this issue only occurs on the printer from the "someone" that contacted us.