crash

[Mioosh]

trainer crashes when trying to enable in-game (even with the supported xenia canary version)

[DottierGalaxy50]

At the moment the script only works with the GOTY edition and it's incompatible with all the patches, so if you have any patches like the 60 fps one it won't work, some patches like skip intro work. I'm not very knowledgeable, but if you are directly using Cheat Engine MEM_MAPPED should be activated, idk if other settings could affect anything.

[HRVAT007]

I've got same setup as the person that made the post, not a single patch and same error :/

[DottierGalaxy50]

If it isn't any of the things i previously mentioned, then i don't know what it could be. You could try directly using the cheat table (.CT) on Cheat Engine 7.5. Open the cheat table once you have Cheat Engine installed, then press Ctrl+Alt+L while on Cheat Engine and then click "Execute script" at the bottom of the pop-up window to open the trainer. You'll have to check if MEM_MAPPED is activated on the Cheat Engine settings.

For the next release i will change some things a bit and that might fix some possible issues, but i'm not planning on working on it at the moment.

[Clippy95]

I've got same setup as the person that made the post, not a single patch and same error :/

If you're on ec267c358 and GOTY, make sure you don't have any software that hooks into Xenia upon launching it like RTSS, Xenia shifts memory by 10000000/20000000 if it can't allocate to 18000000-~19FFFFFF

[HRVAT007]

I've got same setup as the person that made the post, not a single patch and same error :/

If you're on ec267c358 and GOTY, make sure you don't have any software that hooks into Xenia upon launching it like RTSS, Xenia shifts memory by 10000000/20000000 if it can't allocate to 18000000-~19FFFFFF

Thanks that worked, sadly at 30 fps it's very hard to aim, it this could work with 60fps patch that would be amazing. As for RTSS I was able to turn it on after the cheat engine loads up and everything worked fine there.

[Clippy95]

I've got same setup as the person that made the post, not a single patch and same error :/

If you're on ec267c358 and GOTY, make sure you don't have any software that hooks into Xenia upon launching it like RTSS, Xenia shifts memory by 10000000/20000000 if it can't allocate to 18000000-~19FFFFFF

Thanks that worked, sadly at 30 fps it's very hard to aim, it this could work with 60fps patch that would be amazing. As for RTSS I was able to turn it on after the cheat engine loads up and everything worked fine there.

The purpose of the "60" FPS patch in the patches is to unlock FPS, just turn off vsync in Xenia's settings it'll be limited to 64, you can't get unlocked FPS with this for now

[HRVAT007]

I've got same setup as the person that made the post, not a single patch and same error :/

If you're on ec267c358 and GOTY, make sure you don't have any software that hooks into Xenia upon launching it like RTSS, Xenia shifts memory by 10000000/20000000 if it can't allocate to 18000000-~19FFFFFF

Thanks that worked, sadly at 30 fps it's very hard to aim, it this could work with 60fps patch that would be amazing. As for RTSS I was able to turn it on after the cheat engine loads up and everything worked fine there.

The purpose of the "60" FPS patch in the patches is to unlock FPS, just turn off vsync in Xenia's settings it'll be limited to 64, you can't get unlocked FPS with this for now

So it looks to be disabled

[Clippy95]

I've got same setup as the person that made the post, not a single patch and same error :/

If you're on ec267c358 and GOTY, make sure you don't have any software that hooks into Xenia upon launching it like RTSS, Xenia shifts memory by 10000000/20000000 if it can't allocate to 18000000-~19FFFFFF

Thanks that worked, sadly at 30 fps it's very hard to aim, it this could work with 60fps patch that would be amazing. As for RTSS I was able to turn it on after the cheat engine loads up and everything worked fine there.

The purpose of the "60" FPS patch in the patches is to unlock FPS, just turn off vsync in Xenia's settings it'll be limited to 64, you can't get unlocked FPS with this for now

So it looks to be disabled

it's probably the vblank interval then, do framerate_limit = 120 your build seems to have a vsync_interval which is weird that's not what ec267c358 has, still though try framerate_limit = 120 or make it 0 vsync_interval = 8 could work too though I don't have that option

[HRVAT007]

Thanks friend that worked.

I was looking at wrong config file...

[Mioosh]

hmm i have the goty version and no patches & no rtss, i also activated MEM_MAPPED. but still crashes...

[HRVAT007]

Disable any nvidia/AMD overlays.

[Mioosh]

Disable any nvidia/AMD overlays.

didn't work aswell unfortunately... (thanks tho)

[Mpfwade]

I also cannot use it, it just crashes.

[Mpfwade]

also tried everything that mioosh tried

[Mpfwade]

just tried non-goty and still doesn't work