Failed to root the device

[phodina]

Hi @Dragon863,

thanks for the great tool!

I've tested that on my Amazon Echo Gen 2 and unfortunately I have not been able to achive the root access.

Here are some of the errors I encountered.

First this happened when I was attempting to root the device:

$ python main.py 
[23:16:56] INFO: Version: 1.0.0

1: Rooting or restore device
2: Setup recorder
3: Start or restart process
4: Setup home assistant indicator
5: Exit

Select an option: > 1

1: Root or restore
2: Calculate and set fos_flags
3: Exit

Select an option: > 1
[23:16:59] INFO: Please short the device as shown in the image at https://dragon863.github.io/blog/mainboard.jpg
[23:16:59] INFO: To open the device, you will need a torx 8 screwdriver.
[23:16:59] Waiting for bootrom
[23:20:50] Found port = /dev/ttyACM0
[23:20:50] Handshake
[23:20:50] Disable watchdog
[23:20:55] wrong handshake response, probably in preloader
[23:20:55] Waiting for bootrom
[23:22:42] Found port = /dev/ttyACM0
[23:22:42] Handshake
[23:22:42] Disable watchdog
[23:22:47] wrong handshake response, probably in preloader
[23:22:47] Waiting for bootrom
[23:23:04] Found port = /dev/ttyACM0
[23:23:04] Handshake
[23:23:04] Disable watchdog
[23:23:09] wrong handshake response, probably in preloader
[23:23:09] Waiting for bootrom
[23:25:58] Found port = /dev/ttyACM0
[23:25:58] Handshake
[23:25:58] Disable watchdog
[23:26:03] wrong handshake response, probably in preloader
[23:26:03] Waiting for bootrom
[23:28:02] Found port = /dev/ttyACM0
[23:28:02] Handshake
[23:28:02] Disable watchdog
[23:28:07] wrong handshake response, probably in preloader
[23:28:07] Waiting for bootrom
[23:28:30] Found port = /dev/ttyACM0
[23:28:30] Handshake
[23:28:30] Disable watchdog
[23:28:35] wrong handshake response, probably in preloader
[23:28:35] Waiting for bootrom
[23:28:56] Found port = /dev/ttyACM0
[23:28:56] Handshake
[23:28:56] Disable watchdog
[23:29:01] wrong handshake response, probably in preloader
[23:29:01] Waiting for bootrom
[23:29:20] Found port = /dev/ttyACM0
[23:29:20] Handshake
[23:29:20] Disable watchdog
Traceback (most recent call last):
  File "<frozen runpy>", line 198, in _run_module_as_main
  File "<frozen runpy>", line 88, in _run_code
  File "/home/cylon2p0/EchoCLI/internal/amonet/amonet/__main__.py", line 3, in <module>
    amonet.main()
  File "/home/cylon2p0/EchoCLI/internal/amonet/amonet/__init__.py", line 207, in main
    handshake(dev)
  File "/home/cylon2p0/EchoCLI/internal/amonet/amonet/handshake.py", line 11, in handshake
    dev.write32(0x10007000, 0x22000000)
  File "/home/cylon2p0/EchoCLI/internal/amonet/amonet/common.py", line 147, in write32
    self.check(self.dev.read(2), b'\x00\x01') # arg check
               ^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/pyserial-3.5-py3.11.egg/serial/serialposix.py", line 595, in read
    raise SerialException(
serial.serialutil.SerialException: device reports readiness to read but returned no data (device disconnected or multiple access on port?)

So I attempted to get root again:

$ python3 main.py 
[23:31:27] INFO: Version: 1.0.0

1: Rooting or restore device
2: Setup recorder
3: Start or restart process
4: Setup home assistant indicator
5: Exit

Select an option: > 1

1: Root or restore
2: Calculate and set fos_flags
3: Exit

Select an option: > 1
[23:31:32] INFO: Please short the device as shown in the image at https://dragon863.github.io/blog/mainboard.jpg
[23:31:32] INFO: To open the device, you will need a torx 8 screwdriver.
[23:31:32] Waiting for bootrom
[23:32:01] Found port = /dev/ttyACM0
[23:32:01] Handshake
[23:32:01] Disable watchdog
[23:32:01] handshake success!

 * * * Remove the short and press Enter * * * 

[23:32:28] Init crypto engine
Traceback (most recent call last):
  File "/usr/local/lib/python3.11/site-packages/pyserial-3.5-py3.11.egg/serial/serialposix.py", line 621, in write
    n = os.write(self.fd, d)
        ^^^^^^^^^^^^^^^^^^^^
OSError: [Errno 5] Input/output error

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "<frozen runpy>", line 198, in _run_module_as_main
  File "<frozen runpy>", line 88, in _run_code
  File "/home/cylon2p0/EchoCLI/internal/amonet/amonet/__main__.py", line 3, in <module>
    amonet.main()
  File "/home/cylon2p0/EchoCLI/internal/amonet/amonet/__init__.py", line 215, in main
    load_payload(dev, "brom-payload/build/payload.bin")
  File "/home/cylon2p0/EchoCLI/internal/amonet/amonet/load_payload.py", line 85, in load_payload
    init(dev)
  File "/home/cylon2p0/EchoCLI/internal/amonet/amonet/load_payload.py", line 9, in init
    dev.write32(CRYPTO_BASE + 0x0C0C, 0)
  File "/home/cylon2p0/EchoCLI/internal/amonet/amonet/common.py", line 138, in write32
    self.dev.write(b'\xd4')
  File "/usr/local/lib/python3.11/site-packages/pyserial-3.5-py3.11.egg/serial/serialposix.py", line 655, in write
    raise SerialException('write failed: {}'.format(e))
serial.serialutil.SerialException: write failed: [Errno 5] Input/output error

So I tried again and then it finally worked and I was able to dump the partitions and put there the modified payload

[23:33:31] INFO: Please short the device as shown in the image at https://dragon863.github.io/blog/mainboard.jpg
[23:33:31] INFO: To open the device, you will need a torx 8 screwdriver.
[23:33:31] Waiting for bootrom
[23:34:24] Found port = /dev/ttyACM0
[23:34:24] Handshake
[23:34:24] Disable watchdog
[23:34:24] handshake success!

 * * * Remove the short and press Enter * * * 

[23:34:34] Init crypto engine
[23:34:34] Disable caches
[23:34:34] Disable bootrom range checks
[23:34:34] Load payload from brom-payload/build/payload.bin = 0x45C0 bytes
[23:34:34] Send payload
[23:34:35] Let's rock
[23:34:35] Wait for the payload to come online...
[23:34:36] all good
[23:34:36] Check GPT
Partitions:
{'kb': (2048, 2048), 'dkb': (4096, 2048), 'lk_a': (32768, 2048), 'tee1': (49152, 10240), 'lk_b': (65536, 2048), 'tee2': (81920, 10240), 'expdb': (98304, 20480), 'misc': (118784, 1025), 'persist': (131072, 32768), 'boot_a': (163840, 32768), 'boot_b': (196608, 32768), 'recovery': (229376, 32768), 'system_a': (294912, 1572864), 'system_b': (1867776, 1572864), 'cache': (3440640, 1605632), 'userdata': (5046272, 2588639)}

Would you like to root your device, or restore it?
[root/restore] > root
[23:34:46] INFO: Fetching misc partition...
[23:34:46] SUCCESS: Dumped misc.bin from device.
[23:34:46] INFO: Detected that device is using slot B.
[23:34:46] INFO: 
        This next step WILL brick your preloader, rendering your device unbootable without a computer, as this is a TETHERED exploit. This is a reversible change. Press enter if you understand the consequences and accept that I am not responsible for any damage to you device...

[23:34:59] INFO: Backing up preloader...
[23:35:22] SUCCESS: Dumped preloader.bin from device.
[23:35:22] INFO: Clearing preloader header
[8 / 8]
[23:35:22] INFO: 6.x preloader detected, applying unlock patch
[23:35:22] INFO: Downgrading rpmb header
[23:35:23] INFO: rpmb downgrade ok
[23:35:23] INFO: Backing up lk_b...
[23:36:10] SUCCESS: Dumped lk_b.bin from device.
[23:36:10] SUCCESS: Modified Little Kernel! Flashing back to device now.
[23:36:10] INFO: Data is 1048576 and maximum size is not defined
[2048 / 2048]
[23:36:53] SUCCESS: Done! To finalise the process, return to the previous menu and use fos_flags to gain root via ADB.
Select an option: > 
1: Root or restore
2: Calculate and set fos_flags
3: Exit
[23:37:03] FAIL: Invalid option: Exit. Please ensure option is an integer.
Select an option: > 2
[23:37:08] INFO: Please only use this option once you have run the rooting process. Press Ctrl+C if you wish to cancel
Do you want to use recommended options? (y/n) > y
[23:37:18] INFO: Setting fos_flags to 0xa3 using fastboot...
[23:37:18] INFO: Please replug your device now, holding the uber (dot) button. When you see a green LED ring, press enter to continue...
[Waiting for enter press...] > 
< waiting for any device >

However, I have not been able to boot into fastboot nor do I see the green LED ring.

I tested the mtk-client app when plugging in the device.

$ mtk printgpt
MTK Flash/Exploit Client V1.52 (c) B.Kerler 2018-2021

Preloader - Status: Waiting for PreLoader VCOM, please connect mobile
Preloader
Preloader - [LIB]: Status: Handshake failed, retrying...
Preloader
Preloader - [LIB]: Status: Handshake failed, retrying...

Port - Hint:

Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.

Port - Device detected :)
Preloader -     CPU:            MT8163()
Preloader -     HW version:     0x0
Preloader -     WDT:            0x10007000
Preloader -     Uart:           0x11002000
Preloader -     Brom payload addr:  0x100a00
Preloader -     DA payload addr:    0x201000
Preloader -     CQ_DMA addr:        0x10212c00
Preloader -     Var1:           0xb1
Preloader - Disabling Watchdog...
Preloader - HW code:            0x8163
Preloader - Target config:      0x5
Preloader -     SBC enabled:        True
Preloader -     SLA enabled:        False
Preloader -     DAA enabled:        True
Preloader -     SWJTAG enabled:     True
Preloader -     EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT:  False
Preloader -     Root cert required: False
Preloader -     Mem read auth:      False
Preloader -     Mem write auth:     False
Preloader -     Cmd 0xC8 blocked:   False
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader -     HW subcode:     0x8a00
Preloader -     HW Ver:         0xcb00
Preloader -     SW Ver:         0x1
Preloader - ME_ID:          3527C701D1B0924E1CEB0123E20E1A6A
PLTools - Loading payload from mt8163_payload.bin, 0x258 bytes
PLTools - Kamakiri / DA Run
Kamakiri - Trying kamakiri2..
Kamakiri - Done sending payload...
PLTools - Successfully sent payload: /gnu/store/7b8wsg8kbarvq9w3g690s4fn4z1z3np1-mediatek-1.52/lib/python3.10/site-packages/mtkclient/payloads/mt8163_payload.bin
Port - Device detected :)
Main - Device is protected.
Main - Device is in BROM mode. Trying to dump preloader.
DALegacy - Uploading da...
DALegacy - Uploading stage 1...
Preloader - Jumping to 0x200000
Preloader - Jumping to 0x200000: ok.
DALegacy - Got loader sync !
DALegacy - Reading nand info
DALegacy - Reading emmc info
DALegacy - Setting stage 2 config ...
DALegacy - DRAM config needed for : 150100464a323541420275fcd2c294dd
Detected preloader: /gnu/store/7b8wsg8kbarvq9w3g690s4fn4z1z3np1-mediatek-1.52/lib/python3.10/site-packages/mtkclient/Loader/Preloader/preloader_yuanda6580_weg_l.bin
DALegacy - Reading dram nand info ...
DALegacy - Uploading stage 2...
usb_class
usb_class - [LIB]: USB Overflow
DALegacy
DALegacy - [LIB]: Error on sending brom stage 1 :
Main
Main - [LIB]: Error uploading da

Any idea how to progress now?

[phodina]

I've noticed there's a newer version of the mtkclient when reading the thread about the shorting the wire so I tested that but it also returned error:

mtk printgpt
Password:
MTK Flash/Exploit Client V1.6.3 (c) B.Kerler 2018-2023

Preloader - Status: Waiting for PreLoader VCOM, please connect mobile

Port - Hint:

Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.

...........

Port - Hint:

Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.

..Port - Device detected :)
Preloader -     CPU:            MT8163()
Preloader -     HW version:     0x0
Preloader -     WDT:            0x10007000
Preloader -     Uart:           0x11002000
Preloader -     Brom payload addr:  0x100a00
Preloader -     DA payload addr:    0x201000
Preloader -     CQ_DMA addr:        0x10212c00
Preloader -     Var1:           0xb1
Preloader - Disabling Watchdog...
Preloader - HW code:            0x8163
Preloader - Target config:      0x5
Preloader -     SBC enabled:        True
Preloader -     SLA enabled:        False
Preloader -     DAA enabled:        True
Preloader -     SWJTAG enabled:     True
Preloader -     EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT:  False
Preloader -     Root cert required: False
Preloader -     Mem read auth:      False
Preloader -     Mem write auth:     False
Preloader -     Cmd 0xC8 blocked:   False
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader -     HW subcode:     0x8a00
Preloader -     HW Ver:         0xcb00
Preloader -     SW Ver:         0x1
Preloader - ME_ID:          3527C701D1B0924E1CEB0123E20E1A6A
PLTools - Loading payload from mt8163_payload.bin, 0x258 bytes
PLTools - Kamakiri / DA Run
Kamakiri - Trying kamakiri2..
Kamakiri - Done sending payload...
PLTools - Successfully sent payload: /gnu/store/dxpiw914gbqs9ghqlz4g9hgzz1w4jk0f-mediatek-1.63/lib/python3.10/site-packages/mtkclient/payloads/mt8163_payload.bin
Port - Device detected :)
DA_handler - Device is protected.
DA_handler - Device is in BROM mode. Trying to dump preloader.
DALegacy - Uploading legacy da...
DALegacy - Uploading legacy stage 1 from MTK_AllInOne_DA_5.2228.bin
legacyext - Legacy DA2 is patched.
legacyext - Legacy DA2 CMD F0 is patched.
Preloader - Jumping to 0x200000
Preloader - Jumping to 0x200000: ok.
DALegacy - Got loader sync !
DALegacy - Reading nand info
DALegacy - Reading emmc info
DALegacy - ACK: 0402a1
DALegacy - Setting stage 2 config ...
DALegacy - DRAM config needed for : 150100464a323541420275fcd2c294dd
Detected preloader: /gnu/store/dxpiw914gbqs9ghqlz4g9hgzz1w4jk0f-mediatek-1.63/lib/python3.10/site-packages/mtkclient/Loader/Preloader/preloader_yuanda6580_weg_l.bin
DALegacy - Reading dram nand info ...
DALegacy
DALegacy - [LIB]: EMI Config not accepted :(

[Dragon863]

Are you definitely passing the patched preloaded as detailed in the README? It seems to be defaulting to a different one. Make sure you're running mtkclient in the same directory as the file preloader_no_hdr.bin

[phodina]

Hm okay that get me little bit closer. I get I need to look into creating a patch, right?

...........
Port - Device detected :)
Preloader -     CPU:            MT8163()
Preloader -     HW version:     0x0
Preloader -     WDT:            0x10007000
Preloader -     Uart:           0x11002000
Preloader -     Brom payload addr:  0x100a00
Preloader -     DA payload addr:    0x201000
Preloader -     CQ_DMA addr:        0x10212c00
Preloader -     Var1:           0xb1
Preloader - Disabling Watchdog...
Preloader - HW code:            0x8163
Preloader - Target config:      0x5
Preloader -     SBC enabled:        True
Preloader -     SLA enabled:        False
Preloader -     DAA enabled:        True
Preloader -     SWJTAG enabled:     True
Preloader -     EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT:  False
Preloader -     Root cert required: False
Preloader -     Mem read auth:      False
Preloader -     Mem write auth:     False
Preloader -     Cmd 0xC8 blocked:   False
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader -     HW subcode:     0x8a00
Preloader -     HW Ver:         0xcb00
Preloader -     SW Ver:         0x1
Preloader - ME_ID:          3527C701D1B0924E1CEB0123E20E1A6A
PLTools - Loading payload from preloader_no_hdr.bin, 0x22da8 bytes
PLTools - Kamakiri / DA Run
Kamakiri - Trying kamakiri2..
DeviceClass - USBError(32, 'Pipe error')
Traceback (most recent call last):
  File "/gnu/store/dxpiw914gbqs9ghqlz4g9hgzz1w4jk0f-mediatek-1.63/bin/.mtk-real", line 855, in <module>
    mtk = Main(args).run(parser)
  File "/gnu/store/dxpiw914gbqs9ghqlz4g9hgzz1w4jk0f-mediatek-1.63/lib/python3.10/site-packages/mtkclient/Library/mtk_main.py", line 599, in run
    self.cmd_payload(mtk=mtk, payloadfile=payloadfile)
  File "/gnu/store/dxpiw914gbqs9ghqlz4g9hgzz1w4jk0f-mediatek-1.63/lib/python3.10/site-packages/mtkclient/Library/mtk_main.py", line 661, in cmd_payload
    plt.runpayload(filename=payloadfile)
  File "/gnu/store/dxpiw914gbqs9ghqlz4g9hgzz1w4jk0f-mediatek-1.63/lib/python3.10/site-packages/mtkclient/Library/pltools.py", line 102, in runpayload
    if self.kama.payload(payload, addr, True, exploittype):
  File "/gnu/store/dxpiw914gbqs9ghqlz4g9hgzz1w4jk0f-mediatek-1.63/lib/python3.10/site-packages/mtkclient/Library/kamakiri.py", line 139, in payload
    if self.exploit2(payload, addr):
  File "/gnu/store/dxpiw914gbqs9ghqlz4g9hgzz1w4jk0f-mediatek-1.63/lib/python3.10/site-packages/mtkclient/Library/kamakiri.py", line 118, in exploit2
    self.da_write(payloadaddr, len(payload), payload)
  File "/gnu/store/dxpiw914gbqs9ghqlz4g9hgzz1w4jk0f-mediatek-1.63/lib/python3.10/site-packages/mtkclient/Library/kamakiri.py", line 71, in da_write
    return self.da_read_write(address, length, data, check_result)
  File "/gnu/store/dxpiw914gbqs9ghqlz4g9hgzz1w4jk0f-mediatek-1.63/lib/python3.10/site-packages/mtkclient/Library/kamakiri.py", line 107, in da_read_write
    return self.mtk.preloader.brom_register_access(address - 0x40, length, data, check_result)
  File "/gnu/store/dxpiw914gbqs9ghqlz4g9hgzz1w4jk0f-mediatek-1.63/lib/python3.10/site-packages/mtkclient/Library/mtk_preloader.py", line 654, in brom_register_access
    raise RuntimeError(self.eh.status(status))
  File "/gnu/store/dxpiw914gbqs9ghqlz4g9hgzz1w4jk0f-mediatek-1.63/lib/python3.10/site-packages/mtkclient/Library/error.py", line 751, in status
    return "Unknown: " + hex(status)
TypeError: 'bytes' object cannot be interpreted as an integer

[viraniac]

@phodina What command did you used that produced above error? Also judging by continues errors you are facing, I will suggest either you try a different usb cable or different usb port.

[phodina]

I just specified the preloader as you pointed out

~/EchoCLI [env]$ mtk payload --payload preloader_no_hdr.bin

[viraniac]

I just specified the preloader as you pointed out

~/EchoCLI [env]$ mtk payload --payload preloader_no_hdr.bin

I am curious why you are using everything except the command from readme

mtk plstage --preloader=preloader_no_hdr.bin

[phodina]

I just specified the preloader as you pointed out

~/EchoCLI [env]$ mtk payload --payload preloader_no_hdr.bin

I am curious why you are using everything except the command from readme

mtk plstage --preloader=preloader_no_hdr.bin

Thanks @viraniac you're right. Now it connects correctly.

Port - Device detected :)
Preloader -     CPU:            MT8163()
Preloader -     HW version:     0x0
Preloader -     WDT:            0x10007000
Preloader -     Uart:           0x11002000
Preloader -     Brom payload addr:  0x100a00
Preloader -     DA payload addr:    0x201000
Preloader -     CQ_DMA addr:        0x10212c00
Preloader -     Var1:           0xb1
Preloader - Disabling Watchdog...
Preloader - HW code:            0x8163
Preloader - Target config:      0x5
Preloader -     SBC enabled:        True
Preloader -     SLA enabled:        False
Preloader -     DAA enabled:        True
Preloader -     SWJTAG enabled:     True
Preloader -     EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT:  False
Preloader -     Root cert required: False
Preloader -     Mem read auth:      False
Preloader -     Mem write auth:     False
Preloader -     Cmd 0xC8 blocked:   False
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader -     HW subcode:     0x8a00
Preloader -     HW Ver:         0xcb00
Preloader -     SW Ver:         0x1
Preloader - ME_ID:          3527C701D1B0924E1CEB0123E20E1A6A
PLTools - Loading payload from mt8163_payload.bin, 0x258 bytes
PLTools - Kamakiri / DA Run
Kamakiri - Trying kamakiri2..
Kamakiri - Done sending payload...
PLTools - Successfully sent payload: /gnu/store/dxpiw914gbqs9ghqlz4g9hgzz1w4jk0f-mediatek-1.63/lib/python3.10/site-packages/mtkclient/payloads/mt8163_payload.bin
Port - Device detected :)
Main - Connected to device, loading
Main - Using custom preloader : preloader_no_hdr.bin
Mtk - Valid preloader detected.
Mtk - Patched "Patched loader msg" in preloader
Main - Sent preloader to 0x201000, length 0x22aa8
Preloader - Jumping to 0x201000
Preloader - Jumping to 0x201000: ok.
Main - PL Jumped to daaddr 0x201000.
Main - Keep pressed power button to boot.

[viraniac]

Glad it worked for you. If you want to use any other mtk command other than plstage like printgpt that you were trying before, you can use mtkclient/Loader/Preloader/preloader_biscuit.bin as the preloader

[viraniac]

@phodina Could you please do me a favor. Once your device is booted, could you please connect to it using adb shell and run the following command and share the output with me.

strings /dev/block/platform/bootdevice/by-name/userdata | grep http | grep biscuit | sort -u

[phodina]

I got the shell through the adb, but I'm unable to get any command working

root@biscuit:/ # uname -a
/system/bin/sh: uname: not found
127|root@biscuit:/ # strings
/system/bin/sh: strings: not found

Also the devices shuts down after like 20 seconds. I've checked and it's happens each time I execute the mtk payload --payload preloader_no_hdr.bin

[viraniac]

I got the shell through the adb, but I'm unable to get any command working

root@biscuit:/ # uname -a
/system/bin/sh: uname: not found
127|root@biscuit:/ # strings
/system/bin/sh: strings: not found

Thats curious. Whats the out if you run mount?

Also the devices shuts down after like 20 seconds. I've checked and it's happens each time I execute the mtk payload --payload preloader_no_hdr.bin

I hope you mistyped that and are using mtk plstage and not mtk payload. If that was a typo, in a separate window run adb logcat and then boot your device. Once it shuts down share the output of logcat with me

[phodina]

Can't get to the adb shell atm.

My assumption is that it's due to the current spike on the USB. I have at the office a powered hub so I'll test the Echo there.

Sorry, I typed the mtk plstage but wrote mtk payload.

[Dragon863]

Could the missing commands be due to a corrupted system partition? The default fos_flags do disable dm-verity. Also there's an arm64 busybox binary that works for me on the ADB shell in internal/shell if it helps with missing binaries

[viraniac]

Could the missing commands be due to a corrupted system partition?

Unless the user themselves has messed with the system partition, like running fastboot format system_ or something, I don't think that can be an issue. System partition is generally mounted read only so that power failure will not corrupt system files.

there's an arm64 busybody binary Pretty sure you meant busybox and not busybody. toybox has the commands that I have mentioned and symlinks are installed by default in the system partition. So I don't think busybox is required here.

As phodina mentioned that echo dot only runs for 20 seconds, I think he connected to adbd of initrd instead of system and then system turned off. A wiped down system partition can be the reason for system getting unresponsive in 20 seconds, but only phodina can answer whether something was done to system partition or not. I asked phodina to provide output of mount command to confirm whether adb connected to adbd from system or initrd

[Dragon863]

Definitely meant busybox - android autocorrect can be a pain sometimes! I did come across similar issues when I unknowingly changed the system partition with dm-verity on. I guess if it were a current spike it could have caused issues with the flash, but the likelihood that it would boot even as far as that would be quite low

[phodina]

I got the shell through the adb, but I'm unable to get any command working

root@biscuit:/ # uname -a
/system/bin/sh: uname: not found
127|root@biscuit:/ # strings
/system/bin/sh: strings: not found

Thats curious. Whats the out if you run mount?

Also the devices shuts down after like 20 seconds. I've checked and it's happens each time I execute the mtk payload --payload preloader_no_hdr.bin

I hope you mistyped that and are using mtk plstage and not mtk payload. If that was a typo, in a separate window run adb logcat and then boot your device. Once it shuts down share the output of logcat with me

Here's the output of mount:

root@biscuit:/ # mount
rootfs / rootfs ro,seclabel 0 0
tmpfs /dev tmpfs rw,seclabel,nosuid,relatime,mode=755 0 0
devpts /dev/pts devpts rw,seclabel,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,seclabel,relatime 0 0
selinuxfs /sys/fs/selinux selinuxfs rw,relatime 0 0
debugfs /sys/kernel/debug debugfs rw,seclabel,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
none /sys/fs/cgroup tmpfs rw,seclabel,relatime,mode=750,gid=1000 0 0
tmpfs /mnt/asec tmpfs rw,seclabel,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,seclabel,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
tmpfs /tmp tmpfs rw,seclabel,relatime 0 0
tmpfs /mnt/media_rw tmpfs rw,seclabel,relatime,mode=755,uid=1000,gid=1000 0 0
tmpfs /storage/usbotg tmpfs rw,seclabel,relatime,mode=755,uid=1000,gid=1000 0 0
tmpfs /dev/logd tmpfs rw,context=u:object_r:logd_tmpfs:s0,relatime,size=512k,mode=770,uid=1036,gid=1036 0 0
adb /dev/usb-ffs/adb functionfs rw,relatime 0 0
/dev/block/platform/mtk-msdc.0/by-name/system_b /system ext4 ro,seclabel,noatime,discard,nodelalloc,commit=1,data=ordered 0 0
/dev/block/platform/mtk-msdc.0/by-name/userdata /data ext4 rw,seclabel,nosuid,nodev,noatime,discard,noauto_da_alloc,commit=1,data=ordered 0 0
/dev/block/platform/mtk-msdc.0/by-name/cache /cache ext4 rw,seclabel,nosuid,nodev,noatime,discard,noauto_da_alloc,commit=1,data=ordered 0 0
/dev/block/loop0 /data/metrics ext4 rw,seclabel,relatime,data=ordered 0 0
/dev/fuse /mnt/shell/emulated fuse rw,nosuid,nodev,noexec,relatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0

[phodina]

And the output of dmesg:

root@biscuit:/ # dmesg
<4>[    0.164248] <0> (1)[1:swapper/0][name:tz_module&][DAPC] [TEE] dapc_register_ext_handler is called by Type_2B slave(6)
<4>[    0.164285] <0> (0)[0:swapper/0][name:tz_module&][DAPC] [TEE] Type-2 & Type-B violation...
<4>[    0.164300] <0> (0)[0:swapper/0][name:tz_module&][DAPC] [TEE] D0_VIO_STA_4 -> 0x404000
<4>[    0.164313] <0> (0)[0:swapper/0][name:tz_module&][DAPC] [TEE] SRAMROM violation...
<4>[    0.164328] <0> (0)[0:swapper/0][name:tz_module&][DAPC] [TEE] [SRAMROM] violation addr @0 type R
<4>[    0.164341] <0> (0)[0:swapper/0][name:tz_module&][DAPC] [TEE] EMI violation... please check EMI status
<4>[    0.164354] <0> (0)[0:swapper/0][name:tz_module&]EMI MPU violation handler@ta
<4>[    0.164367] <0> (0)[0:swapper/0][name:tz_module&]EMI_MPUS = 20010100, EMI_MPUT = 3002fb0
<4>[    0.164383] <0> (0)[0:swapper/0][name:tz_module&][DAPC] [TEE] DAPC doesn't need to handle...
<4>[    0.164413] <0> (1)[1:swapper/0][name:tz_module&]start_device_protection
<4>[    0.164427] <0> (1)[1:swapper/0][name:tz_module&]Disable useless IRQ
<4>[    0.164711] <0> (0)[27:update_secureti][name:tz_module&]update_securetime_thread_gb CreateSession error -65528
<5>[    0.174274] <0> (0)[1:swapper/0]SCSI subsystem initialized
<6>[    0.174406] <0> (0)[1:swapper/0][name:usbcore&]usbcore: registered new interface driver usbfs
<6>[    0.174463] <0> (0)[1:swapper/0][name:usbcore&]usbcore: registered new interface driver hub
<6>[    0.174547] <0> (0)[1:swapper/0][name:usbcore&]usbcore: registered new device driver usb
<6>[    0.175234] <0> (0)[1:swapper/0][name:snd&]Advanced Linux Sound Architecture Driver Initialized.
<6>[    0.176005] <0> (0)[4:kworker/0:0][name:cfg80211&]cfg80211: Calling CRDA to update world regulatory domain
<6>[    0.176635] <0> (1)[1:swapper/0][name:clocksource&]Switched to clocksource arch_sys_counter
<6>[    0.205226] <0> (1)[1:swapper/0][name:musb_hdrc&]musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
<3>[    0.205963] <0> (1)[1:swapper/0][name:ion_drv&][ION]ion_init()
<3>[    0.206149] <0> (1)[1:swapper/0][name:ion_drv&][ION]ion_drv_probe() heap_nr=2
<3>[    0.206303] <0> (1)[1:swapper/0][name:ion_drv&][ION]ion_drv_create_heap: create heap: ion_mm_heap
<6>[    0.207012] <0> (1)[1:swapper/0]TCP established hash table entries: 4096 (order: 3, 32768 bytes)
<6>[    0.207068] <0> (1)[1:swapper/0]TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
<6>[    0.207150] <0> (1)[1:swapper/0][name:tcp&]TCP: Hash tables configured (established 4096 bind 4096)
<6>[    0.207196] <0> (1)[1:swapper/0][name:tcp_cong&]TCP: reno registered
<6>[    0.207210] <0> (1)[1:swapper/0]UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    0.207233] <0> (1)[1:swapper/0]UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    0.207618] <0> (1)[1:swapper/0]Unpacking initramfs...
<6>[    0.291791] <0> (1)[1:swapper/0][name:page_alloc&]Freeing initrd memory: 1880K (ffffffc004000000 - ffffffc0041d6000)
<6>[    0.294209] <0> (1)[1:swapper/0]futex hash table entries: 1024 (order: 4, 65536 bytes)
<6>[    0.294294] <0> (1)[1:swapper/0][name:audit&]audit: initializing netlink subsys (disabled)
<5>[    0.294347] <0> (1)[1:swapper/0][name:audit&]audit: type=2000 audit(0.280:1): initialized
<5>[    0.300727] <0> (1)[1:swapper/0]VFS: Disk quotas dquot_6.5.2
<4>[    0.300874] <0> (1)[1:swapper/0]Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[    0.302325] <0> (1)[1:swapper/0]fuse init (API version 7.23)
<7>[    0.302629] <0> (1)[1:swapper/0]SELinux:  Registering netfilter hooks
<6>[    0.303999] <0> (1)[1:swapper/0]io scheduler noop registered
<6>[    0.304015] <0> (1)[1:swapper/0]io scheduler deadline registered
<6>[    0.304229] <0> (1)[1:swapper/0]io scheduler cfq registered (default)
<4>[    0.304400] <0> (1)[1:swapper/0][name:pinctrl_mtk_common&]mtk_pctrl_init++++++
<4>[    0.305587] <0> (1)[1:swapper/0][name:pinctrl_mtk_common&]mtk_pctrl_init------ ok
<6>[    0.308005] <0> (1)[1:swapper/0]Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[    0.311491] <0> (1)[1:swapper/0]loop: module loaded
<6>[    0.311884] <0> (1)[1:swapper/0][name:zram&]zram: Created 1 device(s) ...
<6>[    0.312126] <0> (1)[1:swapper/0]mt6323-regulator mt6323-regulator: Chip ID = 0x2023
<6>[    0.312249] <0> (1)[1:swapper/0][name:core&]vproc: 700 <--> 1350 mV at 1150 mV
<6>[    0.312428] <0> (1)[1:swapper/0][name:core&]vsys: 1400 <--> 2987 mV at 2200 mV
<6>[    0.312592] <0> (1)[1:swapper/0][name:core&]vpa: 500 <--> 3650 mV at 500 mV
<6>[    0.312968] <0> (1)[1:swapper/0][name:core&]vtcxo: 2800 mV
<6>[    0.313121] <0> (1)[1:swapper/0][name:core&]vcn28: 2800 mV
<6>[    0.313275] <0> (1)[1:swapper/0][name:core&]vcn33_bt: 3300 <--> 3600 mV at 3600 mV
<6>[    0.313445] <0> (1)[1:swapper/0][name:core&]vcn33_wifi: 3300 <--> 3600 mV at 3600 mV
<6>[    0.313958] <0> (1)[1:swapper/0][name:core&]va: 2800 mV
<6>[    0.314119] <0> (1)[1:swapper/0][name:core&]vcama: 2800 mV
<6>[    0.314283] <0> (1)[1:swapper/0][name:core&]vio28: 2800 mV
<6>[    0.314775] <0> (1)[1:swapper/0][name:core&]vusb: 3300 mV
<6>[    0.314937] <0> (1)[1:swapper/0][name:core&]vmc: 1800 <--> 3300 mV at 3300 mV
<6>[    0.315266] <0> (1)[1:swapper/0][name:core&]vmch: 3000 <--> 3300 mV at 3300 mV
<6>[    0.315591] <0> (1)[1:swapper/0][name:core&]vemc3v3: 3300 mV
<6>[    0.316132] <0> (1)[1:swapper/0][name:core&]vgp1: 3300 mV
<6>[    0.316652] <0> (1)[1:swapper/0][name:core&]vgp2: 1200 mV
<6>[    0.316828] <0> (1)[1:swapper/0][name:core&]vgp3: 1200 <--> 1800 mV at 1200 mV
<6>[    0.317007] <0> (1)[1:swapper/0][name:core&]vcn18: 1800 mV
<6>[    0.317177] <0> (1)[1:swapper/0][name:core&]vsim1: 1800 <--> 3000 mV at 1800 mV
<6>[    0.317357] <0> (1)[1:swapper/0][name:core&]vsim2: 1800 <--> 3000 mV at 1800 mV
<6>[    0.317540] <0> (1)[1:swapper/0][name:core&]vrtc: 2800 mV
<6>[    0.318061] <0> (1)[1:swapper/0][name:core&]vcamaf: 1800 mV
<6>[    0.318413] <0> (1)[1:swapper/0][name:core&]vibr: 3300 mV
<6>[    0.318595] <0> (1)[1:swapper/0][name:core&]vrf18: 1825 mV
<6>[    0.319113] <0> (1)[1:swapper/0][name:core&]vm: 1200 <--> 1800 mV at 1200 mV
<6>[    0.319631] <0> (1)[1:swapper/0][name:core&]vio18: 1800 mV
<6>[    0.319819] <0> (1)[1:swapper/0][name:core&]vcamd: 1200 <--> 1800 mV at 1200 mV
<6>[    0.320004] <0> (1)[1:swapper/0][name:core&]vcamio: 1800 mV
<5>[    0.320207] <0> (1)[1:swapper/0][name:pmic_mt6323&]Power/PMIC MT6323 PMIC CID=0x2023
<5>[    0.320222] <0> (1)[1:swapper/0][name:pmic_mt6323&][Kernel_PMIC_INIT_SETTING_V1] PMIC Chip = 2023
<5>[    0.320231] <0> (1)[1:swapper/0][name:pmic_mt6323&][Kernel_PMIC_INIT_SETTING_V1] 20130604_0.85v
<6>[    0.320640] <0> (1)[1:swapper/0][name:pmic_mt6323&]long press shutdown time is 20s
<6>[    0.387721] <0> (1)[1:swapper/0][name:mt_gpufreq&]@_mt_gpufreq_init
<6>[    0.388042] <0> (1)[1:swapper/0][name:mt_gpufreq&]setup gpufreqs table
<6>[    0.388053] <0> (1)[1:swapper/0][name:mt_gpufreq&]@_mt_gpufreq_get_dvfs_table_type: mmpll_spd_bond = 0x5
<6>[    0.388065] <0> (1)[1:swapper/0][name:mt_gpufreq&]@_mt_setup_gpufreqs_power_table: temp = 40
<6>[    0.388076] <0> (1)[1:swapper/0][name:mt_gpufreq&]mt_gpufreqs_power[0].gpufreq_khz = 520000
<6>[    0.388086] <0> (1)[1:swapper/0][name:mt_gpufreq&]mt_gpufreqs_power[0].gpufreq_volt = 115000
<6>[    0.388096] <0> (1)[1:swapper/0][name:mt_gpufreq&]mt_gpufreqs_power[0].gpufreq_power = 828
<6>[    0.388105] <0> (1)[1:swapper/0][name:mt_gpufreq&]mt_gpufreqs_power[1].gpufreq_khz = 416000
<6>[    0.388115] <0> (1)[1:swapper/0][name:mt_gpufreq&]mt_gpufreqs_power[1].gpufreq_volt = 115000
<6>[    0.388125] <0> (1)[1:swapper/0][name:mt_gpufreq&]mt_gpufreqs_power[1].gpufreq_power = 662
<6>[    0.388134] <0> (1)[1:swapper/0][name:mt_gpufreq&]mt_gpufreqs_power[2].gpufreq_khz = 416000
<6>[    0.388144] <0> (1)[1:swapper/0][name:mt_gpufreq&]mt_gpufreqs_power[2].gpufreq_volt = 115000
<6>[    0.388154] <0> (1)[1:swapper/0][name:mt_gpufreq&]mt_gpufreqs_power[2].gpufreq_power = 662
<6>[    0.388163] <0> (1)[1:swapper/0][name:mt_gpufreq&]mt_gpufreqs_power[3].gpufreq_khz = 299000
<6>[    0.388173] <0> (1)[1:swapper/0][name:mt_gpufreq&]mt_gpufreqs_power[3].gpufreq_volt = 115000
<6>[    0.388183] <0> (1)[1:swapper/0][name:mt_gpufreq&]mt_gpufreqs_power[3].gpufreq_power = 475
<6>[    0.388192] <0> (1)[1:swapper/0][name:mt_gpufreq&]mt_gpufreqs_power[4].gpufreq_khz = 299000
<6>[    0.388202] <0> (1)[1:swapper/0][name:mt_gpufreq&]mt_gpufreqs_power[4].gpufreq_volt = 115000
<6>[    0.388211] <0> (1)[1:swapper/0][name:mt_gpufreq&]mt_gpufreqs_power[4].gpufreq_power = 475
<6>[    0.388221] <0> (1)[1:swapper/0][name:mt_gpufreq&]mt_gpufreqs_power[5].gpufreq_khz = 299000
<6>[    0.388230] <0> (1)[1:swapper/0][name:mt_gpufreq&]mt_gpufreqs_power[5].gpufreq_volt = 115000
<6>[    0.388240] <0> (1)[1:swapper/0][name:mt_gpufreq&]mt_gpufreqs_power[5].gpufreq_power = 475
<6>[    0.388255] <0> (1)[1:swapper/0][name:mt_gpufreq&]GPU current frequency = 377000KHz
<6>[    0.388267] <0> (1)[1:swapper/0][name:mt_gpufreq&]Current Vcore = 1150mV
<6>[    0.388276] <0> (1)[1:swapper/0][name:mt_gpufreq&]g_cur_gpu_OPPidx = 0
<6>[    0.389051] <0> (1)[1:swapper/0]11002000.uart0: ttyMT0 at MMIO 0x0 (irq = 10, base_baud = 1625000) is a MTK UART
<5>[    0.389242] <0> (1)[1:swapper/0][name:uart&][UART 0] not support VFF, Cancel alloc
<3>[    0.390067] <0> (1)[1:swapper/0][name:mt_auxadc&][AUXADC] auxadc_apmix_base error
<4>[    0.390143] <0> (1)[1:swapper/0][name:mt_auxadc&][MT AUXADC_probe3] get device tree info : start !!
<3>[    0.390277] <0> (1)[1:swapper/0][name:mt_auxadc&][AUXADC_AP] find node failed
<4>[    0.390287] <0> (1)[1:swapper/0][name:mt_auxadc&][MT AUXADC_AP] adc_channel_info_init : done !!
<3>[    0.390724] <0> (1)[1:swapper/0][name:mt_pwm_hal&][PWM] get PWM1-main clock, ffffffc0030539c0
<3>[    0.390742] <0> (1)[1:swapper/0][name:mt_pwm_hal&][PWM] get PWM2-main clock, ffffffc003053a80
<3>[    0.390760] <0> (1)[1:swapper/0][name:mt_pwm_hal&][PWM] get PWM3-main clock, ffffffc003053b40
<3>[    0.390778] <0> (1)[1:swapper/0][name:mt_pwm_hal&][PWM] get PWM-main clock, ffffffc003053c00
<4>[    0.390981] <0> (1)[1:swapper/0][name:accdet_drv&][Accdet]accdet_mod_init begin!
<4>[    0.391371] <0> (1)[1:swapper/0][name:accdet_amzn&][accdet]mt_accdet_probe+
<6>[    0.391710] <0> (1)[1:swapper/0][name:input_core&]input: ACCDET as /devices/virtual/input/input0
<4>[    0.391786] <0> (1)[1:swapper/0][name:accdet_amzn&][accdet]accdet_setup_eint  Select pinctrl state done
<4>[    0.392408] <0> (1)[1:swapper/0][name:accdet_amzn&][accdet]accdet_setup_eint- EINT accdet_irq=73, deb=512000
<4>[    0.392516] <0> (1)[1:swapper/0][name:accdet_amzn&][accdet]mt_accdet_probe-
<4>[    0.392575] <0> (1)[1:swapper/0][name:accdet_drv&][Accdet]platform_driver_register done!
<4>[    0.392585] <0> (1)[1:swapper/0][name:accdet_drv&][Accdet]accdet_mod_init done!
<5>[    0.392600] <0> (1)[1:swapper/0][name:mtk_rtc_common&]mtk_rtc_common: rtc_init
<5>[    0.393773] <0> (1)[1:swapper/0][name:mtk_rtc_common&]mtk_rtc_common: read al time = 1970/01/01 00:00:00 (0)
<6>[    0.394684] <0> (1)[1:swapper/0]mt-rtc mt-rtc: rtc core: registered mt-rtc as rtc0
<4>[    0.394726] <0> (1)[1:swapper/0][name:BOOT_COMMON&][BOOT_COMMON] [create_sysfs] No atag,meta found !
<6>[    0.394745] <0> (1)[1:swapper/0][name:devinfo&][[devinfo]]init
<3>[    0.395871] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF[I]mtk_btif_probe:DO BTIF PROBE
<3>[    0.395892] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF[E]hal_btif_clk_get_and_prepare(260):[CCF]clk_btif=ffffffc003055240
<3>[    0.395911] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF[E]hal_btif_clk_get_and_prepare(266):[CCF]clk_btif_apdma=ffffffc003055d80
<3>[    0.396026] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF[I]BTIF_init:p_btif_buffer get memory 0xffffffc01d530000
<3>[    0.396040] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF[I]BTIF_init:p_tx_queue get memory 0xffffffc01d8c0000
<3>[    0.396054] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF[I]BTIF_init:p_rx_queue get memory 0xffffffc01d540000
<3>[    0.396066] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF[I]hal_btif_info_get:_btif_tx_fifo_init succeed
<3>[    0.396184] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF[I]_btif_set_default_setting:get btif irq(50),register base(0xffffff80000d8000)
<3>[    0.396197] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF[I]_btif_set_default_setting:get interrupt flag(0x8)
<3>[    0.396208] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF[I]_btif_set_default_setting:get register phy base(0x0)
<3>[    0.396299] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF-DMA[I]hal_dma_set_default_setting:get tx_dma irq(38),register base(0xffffff80000da700)
<3>[    0.396311] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF-DMA[I]hal_dma_set_default_setting:get interrupt flag(0x8)
<3>[    0.396323] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF-DMA[I]hal_dma_set_default_setting:get register phy base dma_dir(1)(0x0)
<3>[    0.396340] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF[I]_btif_vfifo_init:alloc vFIFO for BTIF succeed in arch64,vir addr:0xffffffc000ac6798,
<3>[    0.396429] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF-DMA[I]hal_dma_set_default_setting:get rx_dma irq(39),register base(0xffffff80000dc780)
<3>[    0.396443] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF-DMA[I]hal_dma_set_default_setting:get interrupt flag(0x8)
<3>[    0.396455] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF-DMA[I]hal_dma_set_default_setting:get register phy base dma_dir(0)(0x0)
<3>[    0.396467] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF[I]_btif_vfifo_init:alloc vFIFO for BTIF succeed in arch64,vir addr:0xffffffc000ac6798,
<3>[    0.396551] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF[I]_btif_rx_btm_init:set RT to btif_rxd workqueue succeed
<3>[    0.396572] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF[I]_btif_rx_btm_init:btif_rxd start to work!
<3>[    0.396583] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF[I]_btif_rx_btm_init:rx_spin_lock init succeed
<3>[    0.396594] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF[I]_btif_tx_ctx_init:nothing is done when btif tx in user's thread
<3>[    0.396604] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF[I]_btif_tx_ctx_init:succeed
<3>[    0.396616] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF[I]btif_chrdev_init:devuce number allocation succeed
<3>[    0.396651] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF[I]btif_chrdev_init:add btif dev to kernel succeed
<3>[    0.396680] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF[I]btif_chrdev_init:create class for btif succeed
<3>[    0.396760] <0> (1)[1:swapper/0][name:btif&]MTK-BTIF[I]btif_chrdev_init:create device for btif succeed
<3>[    0.397403] <0> (1)[1:swapper/0][name:lastpc_plt&][LAST PC] CORE_0 PC = 0x0(), FP = 0x0, SP = 0x0
<3>[    0.397421] <0> (1)[1:swapper/0][name:lastpc_plt&][LAST PC] CORE_1 PC = 0x0(), FP = 0x0, SP = 0x0
<3>[    0.397437] <0> (1)[1:swapper/0][name:lastpc_plt&][LAST PC] CORE_2 PC = 0x0(), FP = 0x0, SP = 0x0
<3>[    0.397453] <0> (1)[1:swapper/0][name:lastpc_plt&][LAST PC] CORE_3 PC = 0x0(), FP = 0x0, SP = 0x0
<5>[    0.397550] <0> (1)[1:swapper/0][name:systracker_interface&]systracker probe
<3>[    0.397571] <0> (1)[1:swapper/0][name:systracker_interface&]of_iomap for systracker @ 0xffffff80000e0000
<5>[    0.397602] <0> (1)[1:swapper/0][name:systracker_interface&]systracker_platform_probe_default:80: irq # 33
<1>[    0.397759] <0> (1)[1:swapper/0][name:systracker_interface&]systracker init done
<4>[    0.399018] <0> (1)[1:swapper/0][name:mtk_wcn_stub_alps&][cmb_stub] thermal_ctrl_cb null
<5>[    0.405362] <0> (1)[1:swapper/0][name:atf_log&]atf_log: inited
<5>[    0.407249] <0> (1)[1:swapper/0][name:atf_log&]ATF reserved memory: 0x5f800000 - 0x5fffffff (0x800000)
<5>[    0.407297] <0> (1)[1:swapper/0][name:atf_log&]atf_buf_phy_ctl: 0x1602224128
<5>[    0.407307] <0> (1)[1:swapper/0][name:atf_log&]atf_buf_len: 8388608
<5>[    0.407317] <0> (1)[1:swapper/0][name:atf_log&]atf_buf_vir_ctl: ffffff80000e8000
<5>[    0.407326] <0> (1)[1:swapper/0][name:atf_log&]atf_log_vir_addr: ffffff8000100100
<5>[    0.407335] <0> (1)[1:swapper/0][name:atf_log&]atf_log_len: 1949440
<2>[    0.407345] <0> (1)[1:swapper/0][name:atf_log&]Fail to request ATF_log_irq interrupt!
<5>[    0.408339] <0> (1)[1:swapper/0][name:mt_emi_bm&]get EMI_BASE_ADDR @ ffffff80000ec000
<3>[    0.409116] <0> (1)[1:swapper/0][name:AudDrv_BTCVSD&][BTCVSD] Auddrv_BTCVSD_Address_Map:
<3>[    0.409127] <0> (1)[1:swapper/0][name:AudDrv_BTCVSD&][BTCVSD] infra_misc_offset=0xf00
<3>[    0.409137] <0> (1)[1:swapper/0][name:AudDrv_BTCVSD&][BTCVSD] conn_bt_cvsd_mask=0x800
<3>[    0.409146] <0> (1)[1:swapper/0][name:AudDrv_BTCVSD&][BTCVSD] read_off=0xfd0
<3>[    0.409155] <0> (1)[1:swapper/0][name:AudDrv_BTCVSD&][BTCVSD] write_off=0xfd4
<3>[    0.409164] <0> (1)[1:swapper/0][name:AudDrv_BTCVSD&][BTCVSD] packet_ind=0xfd8
<3>[    0.409174] <0> (1)[1:swapper/0][name:AudDrv_BTCVSD&][BTCVSD] infra_base=0xffffff80000ee000
<3>[    0.409183] <0> (1)[1:swapper/0][name:AudDrv_BTCVSD&][BTCVSD] btsys_pkv_physical_base=0xffffff80002e0000
<3>[    0.409193] <0> (1)[1:swapper/0][name:AudDrv_BTCVSD&][BTCVSD] btsys_sram_bank2_physical_base=0xffffff80000f0000
<3>[    0.409205] <0> (1)[1:swapper/0][name:AudDrv_BTCVSD&]Disable_CVSD_Wakeup
<4>[    0.409546] <0> (1)[1:swapper/0][name:i2c_core&]i2c-core: driver [tsl258x] using legacy suspend method
<4>[    0.409556] <0> (1)[1:swapper/0][name:i2c_core&]i2c-core: driver [tsl258x] using legacy resume method
<6>[    0.409572] <0> (1)[1:swapper/0][name:ams_tsl2540&]
<6>[    0.409572] <0>TSL2540: INIT()
<6>[    0.410874] <0> (1)[1:swapper/0]spi_master spi32766: will run message pump with realtime priority
<6>[    0.412280] <0> (1)[1:swapper/0][name:tun&]tun: Universal TUN/TAP device driver, 1.6
<6>[    0.412292] <0> (1)[1:swapper/0][name:tun&]tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[    0.412378] <0> (1)[1:swapper/0][name:ppp_generic&]PPP generic driver version 2.4.2
<6>[    0.412495] <0> (1)[1:swapper/0]PPP BSD Compression module registered
<6>[    0.412511] <0> (1)[1:swapper/0]PPP Deflate Compression module registered
<6>[    0.412536] <0> (1)[1:swapper/0]PPP MPPE Compression module registered
<6>[    0.412655] <0> (1)[1:swapper/0][name:usbcore&]usbcore: registered new interface driver usb-storage
<6>[    0.412703] <0> (1)[1:swapper/0][name:usbcore&]usbcore: registered new interface driver ums-alauda
<6>[    0.412747] <0> (1)[1:swapper/0][name:usbcore&]usbcore: registered new interface driver ums-cypress
<6>[    0.412794] <0> (1)[1:swapper/0][name:usbcore&]usbcore: registered new interface driver ums-datafab
<6>[    0.412838] <0> (1)[1:swapper/0][name:usbcore&]usbcore: registered new interface driver ums-freecom
<6>[    0.412882] <0> (1)[1:swapper/0][name:usbcore&]usbcore: registered new interface driver ums-isd200
<6>[    0.412926] <0> (1)[1:swapper/0][name:usbcore&]usbcore: registered new interface driver ums-jumpshot
<6>[    0.412969] <0> (1)[1:swapper/0][name:usbcore&]usbcore: registered new interface driver ums-karma
<6>[    0.413013] <0> (1)[1:swapper/0][name:usbcore&]usbcore: registered new interface driver ums-onetouch
<6>[    0.413057] <0> (1)[1:swapper/0][name:usbcore&]usbcore: registered new interface driver ums-sddr09
<6>[    0.413101] <0> (1)[1:swapper/0][name:usbcore&]usbcore: registered new interface driver ums-sddr55
<6>[    0.413145] <0> (1)[1:swapper/0][name:usbcore&]usbcore: registered new interface driver ums-usbat
<6>[    0.413267] <0> (1)[1:swapper/0][name:usbcore&]usbcore: registered new interface driver usbserial
<6>[    0.413314] <0> (1)[1:swapper/0][name:usbcore&]usbcore: registered new interface driver option
<6>[    0.413353] <0> (1)[1:swapper/0][name:usbserial&]usbserial: USB Serial support registered for GSM modem (1-port)
<6>[    0.413405] <0> (1)[1:swapper/0][name:usbcore&]usbcore: registered new interface driver trancevibrator
<4>[    0.413965] <0> (0)[1:swapper/0][name:kpd&]kpd: Keypad probe start!!!
<3>[    0.413981] <0> (0)[1:swapper/0][name:kpd&]kpd: get kpd-clk fail, but not return, maybe kpd-clk is set by ccf.
<4>[    0.414051] <0> (0)[1:swapper/0][name:kpd&]kpd: kp base: 0xffffff80000fc000, addr:0xffffffc000d7e930,  kp irq: 30
<3>[    0.414090] <0> (0)[1:swapper/0][name:kpd&]kpd: key-debounce = 1024, sw-pwrkey = 113, hw-pwrkey = 8, hw-rstkey = 17, sw-rstkey = 114
<4>[    0.414110] <0> (0)[1:swapper/0][name:hal_kpd&]kpd: init_keymap_state done: ffff ffff ffff ffff ff!
<6>[    0.414287] <0> (0)[1:swapper/0][name:input_core&]input: mtk-kpd as /devices/soc/10010000.keypad/input/input1
<4>[    0.414500] <0> (0)[1:swapper/0][name:hal_kpd&]kpd: Normal Boot long press reboot selection
<4>[    0.414510] <0> (0)[1:swapper/0][name:hal_kpd&]kpd: Enable normal mode LPRST
<4>[    0.414524] <0> (0)[1:swapper/0][name:kpd&]kpd: kpd_pdrv_probe Done
<6>[    0.415013] <0> (0)[1:swapper/0]i2c /dev entries driver
<3>[    0.416350] <0> (1)[1:swapper/0]tsl258x 0-0029: i2c_smbus_write_bytes() to cmd reg failed in taos_probe(), err = -6
<6>[    0.416600] <0> (1)[1:swapper/0][name:ams_tsl2540&]
<6>[    0.416600] <0>TSL2540: probe()
<6>[    0.416658] <0> (1)[1:swapper/0]tsl2540 0-0039: tsl2540_probe: client->irq = 0
<6>[    0.418120] <0> (1)[1:swapper/0]tsl2540 0-0039: tsl2540_probe: device id:e4 device aux id:01 device rev:61
<6>[    0.418133] <0> (1)[1:swapper/0]tsl2540 0-0039: tsl2540_probe: 'tsl2540 rev. 0x61' detected
<6>[    0.418145] <0> (1)[1:swapper/0]tsl2540 0-0039: tsl2540_set_defaults: Loading pltform data
<6>[    0.423497] <0> (1)[1:swapper/0][name:ams_tsl2540&]ALSCAL: alscal ch0=0 ch1=0 lux=316
<6>[    0.426636] <0> (1)[1:swapper/0]tsl2540 0-0039: Probe ok.
<4>[    0.429803] <0> (1)[1:swapper/0][name:sym827_regulator&]sym827_hw_component_detect: DIE_ID = 1, DIE_REV = 12
<6>[    0.430730] <0> (1)[1:swapper/0][name:core&]vproc: 600 <--> 1387 mV at 1150 mV
<4>[    0.430921] <0> (1)[1:swapper/0][name:core&]vproc: Failed to create debugfs directory
<3>[    0.430935] <0> (1)[1:swapper/0]sym827-regulator 1-0060: sym827_i2c_probe: done...
<6>[    0.432055] <0> (1)[1:swapper/0]lirc_dev: IR Remote Control driver registered, major 246
<6>[    0.432076] <0> (1)[1:swapper/0][name:ir_sharp_decoder&]IR Sharp protocol handler initialized
<6>[    0.432091] <0> (1)[1:swapper/0]IR XMP protocol handler initialized
<3>[    0.432437] <0> (1)[1:swapper/0][name:mtk_wdt&]*** MTK WDT register irq ***
<6>[    0.433160] <0> (1)[1:swapper/0]device-mapper: uevent: version 1.0.3
<6>[    0.433376] <0> (1)[1:swapper/0]device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
<3>[    0.435886] <0> (0)[1:swapper/0]mtk-msdc 11230000.mmc: Regulator set error -22: 3300000 - 3300000
<3>[    0.467104] <0> (0)[1:swapper/0]lp5523x 0-0032: detect failed, trying reset: -6
<3>[    0.486964] <0> (0)[1:swapper/0]lp5523x 0-0032: device detection err: -6
<3>[    0.487241] <0> (0)[1:swapper/0]lp5523x 0-0034: detect failed, trying reset: -6
<3>[    0.506839] <0> (0)[1:swapper/0]lp5523x 0-0034: device detection err: -6
<3>[    0.507107] <0> (0)[1:swapper/0]lp5523x 0-0033: detect failed, trying reset: -6
<3>[    0.526872] <0> (0)[1:swapper/0]lp5523x 0-0033: device detection err: -6
<3>[    0.527143] <0> (0)[1:swapper/0]lp5523x 0-0035: detect failed, trying reset: -6
<3>[    0.546836] <0> (0)[1:swapper/0]lp5523x 0-0035: device detection err: -6
<6>[    0.560213] <0> (1)[1:swapper/0]hidraw: raw HID events driver (C) Jiri Kosina
<6>[    0.561389] <0> (1)[1:swapper/0][name:usbcore&]usbcore: registered new interface driver usbhid
<6>[    0.561400] <0> (1)[1:swapper/0]usbhid: USB HID core driver
<6>[    0.561829] <0> (0)[1:swapper/0][name:ashmem&]ashmem: initialized
<6>[    0.561966] <0> (0)[1:swapper/0][name:logger&]logger: created 256K log 'log_kernel'
<6>[    0.562049] <0> (0)[1:swapper/0][name:logger&]logger: created 16K log 'log_metrics'
<6>[    0.562158] <0> (0)[1:swapper/0][name:logger&]logger: created 128K log 'log_vitals'
<3>[    0.562335] <0> (0)[1:swapper/0]Registering kernel log console
<6>[    0.564313] <0> (0)[1:swapper/0][name:printk&]console [klog-1] enabled
<6>[    0.564925] <0> (0)[1:swapper/0][name:usbcore&]usbcore: registered new interface driver snd-usb-audio
<6>[    0.565643] <0> (0)[1:swapper/0]tlv320aic3101 0-0018: TLV320AIC3101 Audio Codec 1.2 (0)
<6>[    0.569360] <0> (2)[6:kworker/u8:0][name:mmc_core&]mmc0: BKOPS_EN bit is not set
<6>[    0.575496] <0> (2)[6:kworker/u8:0]mtk-msdc 11230000.mmc: phase: [map:ffffe1ff] [maxlen:19] [final:22]
<6>[    0.575726] <0> (0)[1:swapper/0]tlv320aic3101 0-0018: aic31xx_i2c_probe: complete (1)
<6>[    0.575883] <0> (0)[1:swapper/0]tlv320aic3101 0-0019: TLV320AIC3101 Audio Codec 1.2 (1)
<6>[    0.575940] <0> (0)[1:swapper/0]tlv320aic3101 0-0019: aic31xx_i2c_probe: complete (2)
<6>[    0.576070] <0> (0)[1:swapper/0]tlv320aic3101 0-001a: TLV320AIC3101 Audio Codec 1.2 (2)
<6>[    0.576127] <0> (0)[1:swapper/0]tlv320aic3101 0-001a: aic31xx_i2c_probe: complete (3)
<6>[    0.576255] <0> (0)[1:swapper/0]tlv320aic3101 0-001b: TLV320AIC3101 Audio Codec 1.2 (3)
<6>[    0.576291] <0> (0)[1:swapper/0]tlv320aic3101 0-001b: aic31xx_i2c_probe: complete (4)
<6>[    0.576514] <0> (2)[6:kworker/u8:0]mtk-msdc 11230000.mmc: phase: [map:fffc00ff] [maxlen:14] [final:25]
<6>[    0.576605] <0> (2)[6:kworker/u8:0][name:mmc_core&]mmc0: new HS200 MMC card at address 0001
<6>[    0.576609] <0> (0)[1:swapper/0][name:snd_soc_tlv320aic32x4&]aic32x4: aic32x4_i2c_probe
<6>[    0.576682] <0> (0)[1:swapper/0][name:snd_soc_tlv320aic32x4&]aic32x4: aic32x4_parse_dt
<6>[    0.576735] <0> (0)[1:swapper/0][name:snd_soc_tlv320aic32x4&]aic32x4: aic32x4_i2c_probe end
<6>[    0.577001] <0> (1)[6:kworker/u8:0][name:mmc_block&]mmcblk0: mmc0:0001 FJ25AB 3.64 GiB
<6>[    0.577126] <0> (2)[6:kworker/u8:0][name:mmc_block&]mmcblk0boot0: mmc0:0001 FJ25AB partition 1 4.00 MiB
<6>[    0.577240] <0> (1)[6:kworker/u8:0][name:mmc_block&]mmcblk0boot1: mmc0:0001 FJ25AB partition 2 4.00 MiB
<6>[    0.577360] <0> (2)[6:kworker/u8:0][name:mmc_block&]mmcblk0rpmb: mmc0:0001 FJ25AB partition 3 512 KiB
<6>[    0.577561] <0> (0)[1:swapper/0][name:amzn_mt_spi&]amzn_mt_spi_probe
<6>[    0.577602] <0> (0)[1:swapper/0][name:amzn_mt_spi&]amzn_mt_spi_probe: dev name amzn-mt-spi-pcm
<3>[    0.578033] <0> (0)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state default fail -19
<3>[    0.578065] <0> (0)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state extamp-gain0 fail -19
<3>[    0.578078] <0> (0)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state extamp-gain1 fail -19
<3>[    0.578090] <0> (0)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state extamp-gain2 fail -19
<3>[    0.578103] <0> (0)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state extamp-gain3 fail -19
<3>[    0.578115] <0> (0)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state hpspk-pullhigh fail -19
<3>[    0.578140] <0> (0)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state hpspk-pulllow fail -19
<3>[    0.578153] <0> (0)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state hpamp-pullhigh fail -19
<3>[    0.578165] <0> (0)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state hpamp-pulllow fail -19
<3>[    0.578178] <0> (0)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state extamp-dacmux-pullhigh fail -19
<3>[    0.578190] <0> (0)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state extamp-dacmux-pulllow fail -19
<3>[    0.578203] <0> (0)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state i2s-mclk fail -19
<3>[    0.578215] <0> (0)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state lineout-off-pullhigh fail -19
<3>[    0.578227] <0> (0)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state lineout-on-pulllow fail -19
<6>[    0.578335] <0> (2)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_I2S_Select: Playback_Audio I2S_Enable=0 ret=0
<6>[    0.580098] <0> (0)[6:kworker/u8:0] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16
<6>[    0.909072] <0> (2)[1:swapper/0][name:amzn_mt_spi&]amzn_mt_spi_probe: FPGA Revision = 34
<6>[    0.909126] <0> (2)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_I2S_Select: Playback_Audio I2S_Enable=1 ret=0
<3>[    1.018746] <0> (2)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state default fail -19
<3>[    1.018766] <0> (2)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state extamp-gain0 fail -19
<3>[    1.018779] <0> (2)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state extamp-gain1 fail -19
<3>[    1.018792] <0> (2)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state extamp-gain2 fail -19
<3>[    1.018804] <0> (2)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state extamp-gain3 fail -19
<3>[    1.018817] <0> (2)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state hpspk-pullhigh fail -19
<3>[    1.018829] <0> (2)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state hpspk-pulllow fail -19
<3>[    1.018841] <0> (2)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state hpamp-pullhigh fail -19
<3>[    1.018854] <0> (2)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state hpamp-pulllow fail -19
<3>[    1.018868] <0> (2)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state i2s-mclk fail -19
<3>[    1.018880] <0> (2)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state lineout-off-pullhigh fail -19
<3>[    1.018892] <0> (2)[1:swapper/0][name:AudDrv_Gpio&]AudDrv_GPIO_probe pinctrl_lookup_state lineout-on-pulllow fail -19
<6>[    1.025231] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]pm_runtime_enable(ISP)
<6>[    1.025245] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]pm_runtime_get_sync(ISP)<6>[    1.025324] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_snd_init card addr = ffffffc000c7aa68
<4>[    1.025493] <0> (2)[1:swapper/0]soc-audio soc-audio: ASoC: machine mt-snd-card should use snd_soc_register_card()
<3>[    1.026011] <0> (2)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: no source widget found for SPEAKER PGA
<3>[    1.026027] <0> (2)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: Failed to add route SPEAKER PGA -> Voice Mux -> VOICE_Mux_E
<4>[    1.026203] <0> (2)[1:swapper/0][name:domain&]audio: Power-off latency exceeded, new value 4616 ns
<3>[    1.026225] <0> (2)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: no source widget found for SPEAKER PGA
<3>[    1.026239] <0> (2)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: Failed to add route SPEAKER PGA -> Voice Mux -> VOICE_Mux_E
<3>[    1.027361] <0> (2)[1:swapper/0]soc-audio soc-audio: control 2:0:0:cmb stub Audio Control:0 is already present
<3>[    1.027379] <0> (2)[1:swapper/0]mt-soc-fm-i2s-pcm mt-soc-fm-i2s-pcm: ASoC: Failed to add cmb stub Audio Control: -16
<6>[    1.027507] <0> (2)[1:swapper/0][name:snd_soc_tlv320aic32x4&]aic32x4: aic32x4_probe
<6>[    1.033760] <0> (2)[1:swapper/0]tlv320aic32x4 2-0018: aic32x4_set_bias_level bias=1
<6>[    1.082380] <0> (2)[1:swapper/0][name:amzn_mt_spi&]amzn_asoc_capt_probe
<6>[    1.082438] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init
<6>[    1.082569] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-tx-dai <-> mt-soc-dl1dai-driver mapping ok
<6>[    1.082582] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init
<6>[    1.082680] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-rx-dai <-> mt-soc-ul1dai-driver mapping ok
<6>[    1.082692] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init
<6>[    1.082829] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-voicemd1-dai <-> mt-soc-voicemd1dai-driver mapping ok
<6>[    1.082842] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init
<6>[    1.082974] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-hdmi-dummy-dai-codec <-> mt-soc-hdmidai-driver mapping ok
<6>[    1.082987] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init
<6>[    1.083128] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-uldlloopback-dai <-> mt-soc-uldlloopbackdai-driver mapping ok
<6>[    1.083141] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init
<6>[    1.083273] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-i2s0-dummy-dai-codec <-> mt-soc-i2s0dai-driver mapping ok
<6>[    1.083286] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init
<6>[    1.083421] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-mrgrx-dai-codec <-> mt-soc-mrgrxdai-driver mapping ok
<6>[    1.083434] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init
<6>[    1.083573] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-mrgrx-dummy-dai-codec <-> mt-soc-mrgrxdai-driver mapping ok
<6>[    1.083586] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init
<6>[    1.083683] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-I2s0tx-dai <-> mt-soc-i2s0dl1dai-driver mapping ok
<6>[    1.083696] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init
<6>[    1.083797] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-dl1awb-dai <-> mt-soc-dl1awbdai-driver mapping ok
<6>[    1.083810] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init
<6>[    1.083913] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-voicemd1-bt-dai <-> mt-soc-voicemd1-btdai-driver mapping ok
<6>[    1.083926] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init
<6>[    1.084029] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-voipcall-btout-dai <-> mt-soc-voipcall-btdai-out-driver mapping ok
<6>[    1.084043] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init
<6>[    1.084142] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-voipcall-btin-dai <-> mt-soc-voipcall-btdai-in-driver mapping ok
<6>[    1.084155] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init
<6>[    1.084258] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-tdmrx-dai-codec <-> mt-soc-tdmrxdai-driver mapping ok
<6>[    1.084271] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init
<6>[    1.084367] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-fmmrg2tx-dummy-dai-codec <-> mt-soc-fmmrgtxdai-driver mapping ok
<6>[    1.084380] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init
<6>[    1.084484] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-rx-dai2 <-> mt-soc-ul2dai-driver mapping ok
<6>[    1.084497] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init
<6>[    1.084597] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-i2s0awb-dai <-> mt-soc-i2s0awbdai-driver mapping ok
<6>[    1.084610] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init
<6>[    1.084750] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-voicemd2-dai <-> mt-soc-voicemd2dai-driver mapping ok
<6>[    1.084762] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init2
<6>[    1.084864] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-dummy-dai-codec <-> Routing-Control mapping ok
<6>[    1.084877] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init
<6>[    1.084977] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-voicemd2-bt-dai <-> mt-soc-voicemd2-btdai-driver mapping ok
<6>[    1.084991] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init
<6>[    1.085090] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-hp-impedance-dai <-> mt-soc-hpimpedancedai-driver mapping ok
<6>[    1.085103] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init
<6>[    1.085238] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-fm-i2s-dai-codec <-> mt-soc-fmi2S-driver mapping ok
<6>[    1.085251] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init
<6>[    1.085391] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-fm-i2s-dummy-dai-codec <-> mt-soc-fmi2S-driver mapping ok
<6>[    1.085404] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init_tlv
<6>[    1.085661] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]of_get_platform_device: of_find_compatible_node(mediatek,mt8163-ispsys) success !!
<6>[    1.085911] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]isp_clk_enable: enable=1
<6>[    1.085921] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]ISP power/clock on by PM ==>
<6>[    1.086069] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]of_get_platform_device: of_find_compatible_node(mediatek,mt8163-ispsys) success !!
<6>[    1.086150] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]load_base_addr: i=0, PA(0x15004000) map_VA=0xffffff8000410000
<6>[    1.086180] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]load_base_addr: i=1, PA(0x15000000) map_VA=0xffffff8000420000
<6>[    1.086224] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]load_base_addr: i=2, PA(0x10217000) map_VA=0xffffff800041c000
<6>[    1.086271] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]of_get_platform_device: of_find_compatible_node(mediatek,mt8163-scpsys) success !!
<3>[    1.086316] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]of_get_nodeVA: (mediatek,mt8163-scpsys)ret_baseaddr PA=0x10006000, VA = 0xffffff800040e000
<6>[    1.086373] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]of_get_platform_device: of_find_compatible_node(mediatek,mt8163-ddrphy) success !!
<3>[    1.086413] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]of_get_nodeVA: (mediatek,mt8163-ddrphy)ret_baseaddr PA=0x1000f000, VA = 0xffffff800041a000
<6>[    1.086428] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]mclk_enable_reg: reg=ffffff8000414200 curr=0 en=1
<6>[    1.086551] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]of_get_platform_device: of_find_compatible_node(mediatek,mt8163-camera_hw) success !!
<6>[    1.086621] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]ccf_clk_enable: enable=1
<6>[    1.086696] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]mclk_enable_reg: reg=ffffff8000414200 curr=20000000 en=1
<6>[    1.086709] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]mclk_divider_reg: clk divider cnt=4 clkf_pol=1 clkf_edge=2
<6>[    1.086727] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]register_dump: PH_CNT=ffffff8000414200 READ=0xa0000005, SEN_Ck=ffffff8000414204 READ=0x40002
<6>[    1.086741] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]register_dump: [MTCMOS CHECK]===> [0x1000660c]=0x2effffa ,[0x10006610]=0x2effffa
<6>[    1.086755] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]register_dump: [VENCPLL CHECK]===> [0x1000F800]=0xa120 [0x1000F80c]=0x2
<6>[    1.086768] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]register_dump: [IMG_CG_CON CHECK]===> [0xffffff8000420000]=0xe
<6>[    1.086780] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]register_dump: [0] TOP_CAMTG_SEL Freq = 48000000
<6>[    1.086793] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]register_dump: [1] TOP_UNIVPLL_D26 Freq = 48000000
<6>[    1.086805] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]register_dump: [2] TOP_UNIVPLL2_D2 Freq = 208000000
<6>[    1.086921] <0> (2)[1:swapper/0]soc-audio soc-audio: tlv320aic32x4-hifi <-> mt-soc-dl1dai-driver mapping ok
<6>[    1.087024] <0> (2)[1:swapper/0][name:amzn_mt_spi&]amzn_mt_spi_pcm_new
<6>[    1.087146] <0> (2)[1:swapper/0]soc-audio soc-audio: tlv320aic3101-codec <-> amzn-mt-spi-pcm mapping ok
<6>[    1.087160] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_audio_init
<6>[    1.087268] <0> (2)[1:swapper/0]soc-audio soc-audio: mt-soc-dummy-dai-codec <-> mt-soc-dl1dai-driver mapping ok
<4>[    1.100565] <0> (2)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create Voice_MD1_PLayback debugfs file
<4>[    1.100594] <0> (2)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create Voice_MD2_PLayback debugfs file
<4>[    1.100675] <0> (2)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create MultiMedia_Routing debugfs file
<4>[    1.100693] <0> (2)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create MultiMedia_Routing debugfs file
<4>[    1.100718] <0> (2)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create HMDI_PLayback debugfs file
<4>[    1.100743] <0> (2)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create I2S0_PLayback debugfs file
<4>[    1.100768] <0> (2)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create MRGRX_PLayback debugfs file
<4>[    1.100806] <0> (2)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create ANC_Debug_Record_MOD debugfs file
<4>[    1.100831] <0> (2)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create ANC_Debug_Record_ADC2 debugfs file
<4>[    1.100855] <0> (2)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create ANC_Debug_Record_IO2 debugfs file
<4>[    1.100879] <0> (2)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create FM_I2S_Playback debugfs file
<4>[    1.100977] <0> (2)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: Failed to create Voice_MD1_PLayback debugfs file
<4>[    1.101007] <0> (2)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: Failed to create Voice_MD2_PLayback debugfs file
<4>[    1.101051] <0> (2)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: Failed to create ULDL_Loopback debugfs file
<4>[    1.101088] <0> (2)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: Failed to create MRGRX_PLayback debugfs file
<4>[    1.101119] <0> (2)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: Failed to create FM_I2S_Playback debugfs file
<4>[    1.101136] <0> (2)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: Failed to create SPEAKER debugfs file
<4>[    1.101153] <0> (2)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: Failed to create HEADSET debugfs file
<4>[    1.101170] <0> (2)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: Failed to create EARPIECE debugfs file
<4>[    1.101216] <0> (2)[1:swapper/0]mt-soc-dai-driver mt-soc-dai-driver: ASoC: Failed to create HMDI_PLayback debugfs file
<4>[    1.101282] <0> (2)[1:swapper/0]mt-soc-dai-driver mt-soc-dai-driver: ASoC: Failed to create Voice_MD1_PLayback debugfs file
<4>[    1.101307] <0> (2)[1:swapper/0]mt-soc-dai-driver mt-soc-dai-driver: ASoC: Failed to create Voice_MD2_PLayback debugfs file
<4>[    1.101331] <0> (2)[1:swapper/0]mt-soc-dai-driver mt-soc-dai-driver: ASoC: Failed to create ULDL_Loopback debugfs file
<4>[    1.101355] <0> (2)[1:swapper/0]mt-soc-dai-driver mt-soc-dai-driver: ASoC: Failed to create I2S0_PLayback debugfs file
<4>[    1.101409] <0> (2)[1:swapper/0]mt-soc-dai-driver mt-soc-dai-driver: ASoC: Failed to create MRGRX_PLayback debugfs file
<4>[    1.101434] <0> (2)[1:swapper/0]mt-soc-dai-driver mt-soc-dai-driver: ASoC: Failed to create MRGRX_CAPTURE debugfs file
<4>[    1.101504] <0> (2)[1:swapper/0]mt-soc-dai-driver mt-soc-dai-driver: ASoC: Failed to create FM_I2S_Playback debugfs file
<4>[    1.101529] <0> (2)[1:swapper/0]mt-soc-dai-driver mt-soc-dai-driver: ASoC: Failed to create FM_I2S_Capture debugfs file
<6>[    1.110344] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_snd_init dai_link = ffffffc000c7aec0
<6>[    1.110362] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_snd_init dai_link -----
<4>[    1.110593] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_get_dts_data: No MCLK frequency in dts. Using default
<6>[    1.110609] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_get_dts_data: amp_fault pin info not found!
<6>[    1.110621] <0> (2)[1:swapper/0][name:mt_soc_machine&]mt_soc_get_dts_data: MCLK frequency = 9600000
<6>[    1.110686] <0> (2)[1:swapper/0][name:drop_monitor&]drop_monitor: Initializing network drop monitor service
<6>[    1.110767] <0> (2)[1:swapper/0][name:act_mirred&]Mirror/redirect action on
<6>[    1.110798] <0> (2)[1:swapper/0][name:cls_u32&]u32 classifier
<6>[    1.110808] <0> (2)[1:swapper/0][name:cls_u32&]    Performance counters on
<6>[    1.110818] <0> (2)[1:swapper/0][name:cls_u32&]    input device check on
<6>[    1.110829] <0> (2)[1:swapper/0][name:cls_u32&]    Actions configured
<6>[    1.110852] <0> (2)[1:swapper/0][name:nfnetlink&]Netfilter messages via NETLINK v0.30.
<6>[    1.110910] <0> (2)[1:swapper/0]nf_conntrack version 0.5.0 (3769 buckets, 15076 max)
<6>[    1.111195] <0> (2)[1:swapper/0][name:nf_conntrack_netlink&]ctnetlink v0.93: registering with nfnetlink.
<6>[    1.111598] <0> (2)[1:swapper/0]xt_time: kernel timezone is -0000
<6>[    1.111708] <0> (2)[1:swapper/0][name:ipip&]ipip: IPv4 over IPv4 tunneling driver
<6>[    1.112327] <0> (2)[1:swapper/0][name:ip_tables&]ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    1.112476] <0> (2)[1:swapper/0]arp_tables: (C) 2002 David S. Miller
<6>[    1.112509] <0> (2)[1:swapper/0][name:tcp_cong&]TCP: cubic registered
<6>[    1.114013] <0> (2)[1:swapper/0][name:mip6&]mip6: Mobile IPv6
<6>[    1.114055] <0> (2)[1:swapper/0][name:ip6_tables&]ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[    1.114213] <0> (2)[1:swapper/0][name:sit&]sit: IPv6 over IPv4 tunneling driver
<6>[    1.115208] <0> (2)[1:swapper/0][name:bridge&]bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
<6>[    1.115228] <0> (2)[1:swapper/0][name:8021q&]8021q: 802.1Q VLAN Support v1.8
<5>[    1.115742] <0> (2)[1:swapper/0][name:armv8_deprecated&]Registered cp15_barrier emulation handler
<5>[    1.115759] <0> (2)[1:swapper/0][name:armv8_deprecated&]Registered setend emulation handler
<5>[    1.117472] <0> (3)[1:swapper/0][name:key&]Key type encrypted registered
<3>[    1.117755] <0> (3)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [ERROR]cpufreq_apmixed_base = 0xffffff80004a4000
<3>[    1.117796] <0> (3)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [ERROR]infracfg_ao_base = 0xffffff80004a6000
<3>[    1.117831] <0> (3)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [ERROR]infracfg_ao_base = 0xffffff80004a8000
<4>[    1.118283] <0> (3)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [GPU/DRAM][Turbo], GPU800MHz_DRAM1866MHz_Flag=0
<4>[    1.118532] <0> (3)[21:kworker/3:0][name:domain&]mfg: Power-off latency exceeded, new value 14923 ns
<4>[    1.118557] <0> (3)[21:kworker/3:0][name:domain&]mfg_async: Power-off latency exceeded, new value 7539 ns
<4>[    1.118580] <0> (3)[21:kworker/3:0][name:domain&]conn: Power-off latency exceeded, new value 5693 ns
<4>[    1.118593] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_init: max_cpu_num: 4
<4>[    1.118600] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] No DT, get CPU frequency bounding from efuse = 1001
<4>[    1.118607] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] No DT, get CPU frequency bounding lv = 1 from efuse = 1001
<4>[    1.118614] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] current CPU efuse is 4097, AllowTurboMode=0
<4>[    1.118637] <0> (3)[21:kworker/3:0][name:domain&]venc: Power-off latency exceeded, new value 5000 ns
<4>[    1.118642] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [0] = { .cpufreq_khz = 1300000,      .cpufreq_ncpu = 4,      .cpufreq_power = 2243 }
<4>[    1.118650] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [1] = { .cpufreq_khz = 1216000,      .cpufreq_ncpu = 4,      .cpufreq_power = 1952 }
<4>[    1.118657] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [2] = { .cpufreq_khz = 1133000,      .cpufreq_ncpu = 4,      .cpufreq_power = 1682 }
<4>[    1.118665] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [3] = { .cpufreq_khz = 1300000,      .cpufreq_ncpu = 3,      .cpufreq_power = 1682 }
<4>[    1.118681] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [4] = { .cpufreq_khz = 1216000,      .cpufreq_ncpu = 3,      .cpufreq_power = 1464 }
<4>[    1.118689] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [5] = { .cpufreq_khz = 1050000,      .cpufreq_ncpu = 4,      .cpufreq_power = 1429 }
<4>[    1.118697] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [6] = { .cpufreq_khz = 871000,       .cpufreq_ncpu = 4,      .cpufreq_power = 1265 }
<4>[    1.118704] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [7] = { .cpufreq_khz = 1133000,      .cpufreq_ncpu = 3,      .cpufreq_power = 1261 }
<4>[    1.118712] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [8] = { .cpufreq_khz = 741000,       .cpufreq_ncpu = 4,      .cpufreq_power = 1148 }
<4>[    1.118720] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [9] = { .cpufreq_khz = 1300000,      .cpufreq_ncpu = 2,      .cpufreq_power = 1121 }
<4>[    1.118727] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [10] = { .cpufreq_khz = 1050000,    .cpufreq_ncpu = 3,       .cpufreq_power = 1071 }
<4>[    1.118735] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [11] = { .cpufreq_khz = 624000,      .cpufreq_ncpu = 4,      .cpufreq_power = 1041 }
<4>[    1.118743] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [12] = { .cpufreq_khz = 600000,      .cpufreq_ncpu = 4,      .cpufreq_power = 1019 }
<4>[    1.118751] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [13] = { .cpufreq_khz = 1216000,    .cpufreq_ncpu = 2,       .cpufreq_power = 976 }
<4>[    1.118758] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [14] = { .cpufreq_khz = 871000,      .cpufreq_ncpu = 3,      .cpufreq_power = 948 }
<4>[    1.118766] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [15] = { .cpufreq_khz = 741000,      .cpufreq_ncpu = 3,      .cpufreq_power = 861 }
<4>[    1.118774] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [16] = { .cpufreq_khz = 1133000,    .cpufreq_ncpu = 2,       .cpufreq_power = 841 }
<4>[    1.118782] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [17] = { .cpufreq_khz = 624000,      .cpufreq_ncpu = 3,      .cpufreq_power = 780 }
<4>[    1.118790] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [18] = { .cpufreq_khz = 600000,      .cpufreq_ncpu = 3,      .cpufreq_power = 764 }
<4>[    1.118797] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [19] = { .cpufreq_khz = 1050000,    .cpufreq_ncpu = 2,       .cpufreq_power = 714 }
<4>[    1.118805] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [20] = { .cpufreq_khz = 871000,      .cpufreq_ncpu = 2,      .cpufreq_power = 632 }
<4>[    1.118813] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [21] = { .cpufreq_khz = 741000,      .cpufreq_ncpu = 2,      .cpufreq_power = 574 }
<4>[    1.118821] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [22] = { .cpufreq_khz = 1300000,    .cpufreq_ncpu = 1,       .cpufreq_power = 560 }
<4>[    1.118828] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [23] = { .cpufreq_khz = 624000,      .cpufreq_ncpu = 2,      .cpufreq_power = 520 }
<4>[    1.118836] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [24] = { .cpufreq_khz = 600000,      .cpufreq_ncpu = 2,      .cpufreq_power = 509 }
<4>[    1.118844] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [25] = { .cpufreq_khz = 1216000,    .cpufreq_ncpu = 1,       .cpufreq_power = 488 }
<4>[    1.118852] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [26] = { .cpufreq_khz = 1133000,    .cpufreq_ncpu = 1,       .cpufreq_power = 420 }
<4>[    1.118859] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [27] = { .cpufreq_khz = 1050000,    .cpufreq_ncpu = 1,       .cpufreq_power = 357 }
<4>[    1.118867] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [28] = { .cpufreq_khz = 871000,      .cpufreq_ncpu = 1,      .cpufreq_power = 316 }
<4>[    1.118875] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [29] = { .cpufreq_khz = 741000,      .cpufreq_ncpu = 1,      .cpufreq_power = 287 }
<4>[    1.118883] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [30] = { .cpufreq_khz = 624000,      .cpufreq_ncpu = 1,      .cpufreq_power = 260 }
<4>[    1.118890] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] [31] = { .cpufreq_khz = 600000,      .cpufreq_ncpu = 1,      .cpufreq_power = 254 }
<4>[    1.118898] <0> (0)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] MT_CPU_DVFS_LITTLE freq = 1050000
<4>[    1.118918] <0> (3)[21:kworker/3:0][name:domain&]vdec: Power-off latency exceeded, new value 5077 ns
<4>[    1.118939] <0> (3)[21:kworker/3:0][name:domain&]mm: Power-off latency exceeded, new value 6847 ns
<5>[    1.119961] <0> (0)[1:swapper/0][name:mtk_rtc_hal_common&]mtk_rtc_hal_common: RTC_IRQ_EN = 0x8, RTC_PDN1 = 0x0
<5>[    1.119978] <0> (0)[1:swapper/0][name:mtk_rtc_common&]mtk_rtc_common: There is Crystal
<6>[    1.120977] <0> (0)[1:swapper/0][name:musb_hdrc&]musb probe
<6>[    1.121036] <0> (0)[1:swapper/0][name:musb_hdrc&]musb probe reg: 0xffffff80004e0000 ,0xffffff8000500000 , irq: 0x51
<4>[    1.121190] <0> (0)[1:swapper/0][name:core&]usb_phy_generic.1.auto supply vcc not found, using dummy regulator
<3>[    1.121520] <0> (0)[1:swapper/0]musb-hdrc musb-hdrc.0.auto: Cannot find usb pinctrl drvvbus
<3>[    1.121535] <0> (0)[1:swapper/0]musb-hdrc musb-hdrc.0.auto: Cannot find usb pinctrl drvvbus_low
<3>[    1.121549] <0> (0)[1:swapper/0]musb-hdrc musb-hdrc.0.auto: Cannot find usb pinctrl drvvbus_high
<3>[    1.121560] <0> (0)[1:swapper/0][name:usb20_host&]pinctrl_drvvbus couldn't be found, not selecting state
<3>[    1.121574] <0> (0)[1:swapper/0]musb-hdrc musb-hdrc.0.auto: Cannot find usb pinctrl otg5ven
<3>[    1.121587] <0> (0)[1:swapper/0]musb-hdrc musb-hdrc.0.auto: Cannot find usb pinctrl otg5ven_low
<3>[    1.121600] <0> (0)[1:swapper/0]musb-hdrc musb-hdrc.0.auto: Cannot find usb pinctrl otg5ven_high
<3>[    1.121611] <0> (0)[1:swapper/0][name:usb20_host&]pinctrl_otg5ven couldn't be found, not selecting state
<4>[    1.132648] <0> (0)[1:swapper/0]usb phy read default eye value, Addr: 0x5=0x55
<4>[    1.132661] <0> (0)[1:swapper/0]usb phy read eye value after set, Addr: 0x5=0x77
<6>[    1.133780] <0> (0)[1:swapper/0][name:musb_hdrc&]musb core probe done base 0xffffff8000500000
<6>[    1.133814] <0> (0)[1:swapper/0][name:usb20&]USB probe done!
<5>[    1.136007] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: f->dev_name = f_ffs, f->name = ffs
<6>[    1.136095] <0> (2)[1:swapper/0][name:g_android&][g_android]file system registered
<5>[    1.136108] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: init ffs success!!
<5>[    1.136126] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: f->dev_name = f_adb, f->name = adb
<5>[    1.136259] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: init adb success!!
<5>[    1.136274] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: f->dev_name = f_acm, f->name = acm
<5>[    1.136614] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: init acm success!!
<5>[    1.136672] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: f->dev_name = f_mtp, f->name = mtp
<5>[    1.136893] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: init mtp success!!
<5>[    1.136908] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: f->dev_name = f_ptp, f->name = ptp
<5>[    1.136979] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: init ptp success!!
<5>[    1.136993] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: f->dev_name = f_ecm, f->name = ecm
<5>[    1.137063] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: init ecm success!!
<5>[    1.137081] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: f->dev_name = f_eem, f->name = eem
<5>[    1.137147] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: init eem success!!
<5>[    1.137165] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: f->dev_name = f_gser, f->name = gser
<5>[    1.137501] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: init gser success!!
<5>[    1.137521] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: f->dev_name = f_rndis, f->name = rndis
<5>[    1.137588] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: init rndis success!!
<5>[    1.137618] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: f->dev_name = f_mass_storage, f->name = mass_storage
<6>[    1.137790] <0> (2)[1:swapper/0]android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[    1.137801] <0> (2)[1:swapper/0]android_usb gadget: Number of LUNs=1
<6>[    1.137813] <0> (2)[1:swapper/0] lun0: LUN: removable file: (no medium)
<5>[    1.137833] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: init mass_storage success!!
<5>[    1.137849] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: f->dev_name = f_accessory, f->name = accessory
<5>[    1.137974] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: init accessory success!!
<5>[    1.137987] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: f->dev_name = f_audio_source, f->name = audio_source
<5>[    1.138048] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: init audio_source success!!
<5>[    1.138064] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: f->dev_name = f_midi, f->name = midi
<5>[    1.138123] <0> (2)[1:swapper/0][name:g_android&][g_android][USB]android_init_functions: init midi success!!
<6>[    1.138143] <0> (2)[1:swapper/0]android_usb gadget: android_usb ready
<6>[    1.138163] <0> (2)[1:swapper/0]musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
<6>[    1.138189] <0> (2)[1:swapper/0]musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1
<6>[    1.138730] <0> (2)[1:swapper/0]hub 1-0:1.0: USB hub found
<6>[    1.138766] <0> (2)[1:swapper/0]hub 1-0:1.0: 1 port detected
<6>[    1.139650] <0> (2)[1:swapper/0][name:input_core&]input: keys as /devices/keys/input/input2
<6>[    1.140620] <0> (2)[1:swapper/0]mt-rtc mt-rtc: setting system clock to 2010-01-01 00:00:07 UTC (1262304007)
<4>[    1.141150] <0> (2)[1:swapper/0][name:mtk_wcn_stub_alps&][cmb_stub] thermal_ctrl_cb null
<3>[    1.141830] <0> (2)[1:swapper/0]Amazon: sign of life device driver init
<3>[    1.141849] <0> (2)[1:swapper/0]life_cycle_platform_init: Support MTK platform
<3>[    1.141865] <0> (2)[1:swapper/0]mtk_read_boot_reason: boot_reason is 0x1
<3>[    1.141875] <0> (2)[1:swapper/0]Failed to read boot rtc boot reason
<3>[    1.141888] <0> (2)[1:swapper/0]mtk_read_shutdown_reason: shutdown reason is 0x1
<3>[    1.141897] <0> (2)[1:swapper/0]Failed to read shutdown rtc boot reason
<3>[    1.141911] <0> (2)[1:swapper/0]mtk_read_thermal_shutdown_reason: thermal shutdown reason 0x1
<3>[    1.141921] <0> (2)[1:swapper/0]Failed to read boot rtc boot reason
<3>[    1.141933] <0> (2)[1:swapper/0]mtk_read_special_mode: special mode is 0x800
<3>[    1.141945] <0> (2)[1:swapper/0]dev_sol_init: life cycle reason is Life Cycle Reason Not Available
<1>[    1.141981] <0> (1)[71:kworker/u8:1][name:wd_common_drv&][WDK] WDT start kicker done CPU_NR=4
<1>[    1.142012] <0> (1)[71:kworker/u8:1][name:wd_common_drv&][WDK]init_wk done late_initcall cpus_kick_bit=0xf -----
<3>[    1.155051] <0> (2)[1:swapper/0][name:mt_amzn_mclk&]pm_runtime_put_sync(ISP)
<6>[    1.155137] <0> (2)[1:swapper/0][name:core&]vrf18: disabling
<6>[    1.155178] <0> (2)[1:swapper/0][name:core&]vmc: disabling
<6>[    1.155197] <0> (2)[1:swapper/0][name:core&]vio28: disabling
<4>[    1.155867] <0> (2)[1:swapper/0][name:mt_cpufreq&][Power/cpufreq] _calc_new_opp_idx(): for ptpod init, idx = 6
<4>[    1.157070] <0> (3)[34:cfinteractive][name:mt_cpufreq&][Power/cpufreq] _calc_new_opp_idx(): for ptpod init, idx = 6
<6>[    1.159249] <0> (2)[1:swapper/0]ALSA device list:
<6>[    1.159260] <0> (2)[1:swapper/0]  #0: mt-snd-card
<3>[    1.159412] <0> (2)[1:swapper/0][name:uart&][UARTX]:E:1158: Port :0 not support vfifo
<6>[    1.159605] <0> (2)[1:swapper/0][name:page_alloc&]Freeing unused kernel memory: 404K (ffffffc000b86000 - ffffffc000beb000)
<6>[    1.159623] <0> (2)[1:swapper/0][name:page_alloc&]Freeing alternatives memory: 16K (ffffffc000beb000 - ffffffc000bef000)
<7>[    1.168211] <0> (0)[1:init]SELinux: 2048 avtab hash slots, 10611 rules.
<7>[    1.174012] <0> (0)[1:init]SELinux: 2048 avtab hash slots, 10611 rules.
<7>[    1.174164] <0> (0)[1:init]SELinux:  1 users, 2 roles, 1035 types, 1 bools, 1 sens, 1024 cats
<7>[    1.174176] <0> (0)[1:init]SELinux:  88 classes, 10611 rules
<6>[    1.176057] <0> (0)[1:init]SELinux:  Permission audit_read in class capability2 not defined in policy.
<6>[    1.176083] <0> (0)[1:init]SELinux: the above unknown classes and permissions will be denied
<7>[    1.176119] <0> (0)[1:init]SELinux:  Completing initialization.
<7>[    1.176124] <0> (0)[1:init]SELinux:  Setting up existing superblocks.
<7>[    1.176145] <0> (0)[1:init]SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<7>[    1.176239] <0> (0)[1:init]SELinux: initialized (dev bdev, type bdev), not configured for labeling
<7>[    1.176256] <0> (0)[1:init]SELinux: initialized (dev proc, type proc), uses genfs_contexts
<7>[    1.176282] <0> (0)[1:init]SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    1.176303] <0> (0)[1:init]SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<7>[    1.195900] <0> (0)[1:init]SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<7>[    1.195919] <0> (0)[1:init]SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<7>[    1.195933] <0> (0)[1:init]SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
<7>[    1.195943] <0> (0)[1:init]SELinux: initialized (dev aio, type aio), not configured for labeling
<7>[    1.195957] <0> (0)[1:init]SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<7>[    1.195982] <0> (0)[1:init]SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<7>[    1.196050] <0> (0)[1:init]SELinux: initialized (dev configfs, type configfs), not configured for labeling
<7>[    1.196062] <0> (0)[1:init]SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    1.196095] <0> (0)[1:init]SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<5>[    1.232943] <0> (1)[1:init][name:audit&]audit: type=1403 audit(1262304007.580:2): policy loaded auid=4294967295 ses=4294967295
<4>[    1.236767] <0> (1)[1:init]musb_bus_suspend is called. #line 2899
<11>[    1.246070] <0> (1)[1:init]init: SELinux: Unknown value of ro.boot.selinux. Got: "enforce". Assuming enforcing.
<5>[    1.246183] <0> (1)[1:init][name:audit&]audit: type=1404 audit(1262304007.590:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
<11>[    1.356340] <0> (1)[1:init]init: /init.mt8163.rc: 410: invalid command 'mknod'
<11>[    1.356500] <0> (1)[1:init]init: /init.mt8163.rc: 537: invalid command 'mknod'
<11>[    1.356521] <0> (1)[1:init]init: /init.mt8163.rc: 544: invalid command 'mknod'
<11>[    1.356844] <0> (1)[1:init]init: /init.mt8163.rc: 822: invalid option 'setprop'
<11>[    1.356864] <0> (1)[1:init]init: /init.mt8163.rc: 823: invalid option 'setprop'
<11>[    1.356882] <0> (1)[1:init]init: /init.mt8163.rc: 824: invalid option 'setprop'
<11>[    1.356900] <0> (1)[1:init]init: /init.mt8163.rc: 825: invalid option 'setprop'
<11>[    1.356918] <0> (1)[1:init]init: /init.mt8163.rc: 826: invalid option 'setprop'
<11>[    1.356935] <0> (1)[1:init]init: /init.mt8163.rc: 827: invalid option 'setprop'
<11>[    1.356952] <0> (1)[1:init]init: /init.mt8163.rc: 828: invalid option 'setprop'
<11>[    1.356969] <0> (1)[1:init]init: /init.mt8163.rc: 829: invalid option 'setprop'
<11>[    1.356987] <0> (1)[1:init]init: /init.mt8163.rc: 830: invalid option 'setprop'
<11>[    1.357004] <0> (1)[1:init]init: /init.mt8163.rc: 831: invalid option 'setprop'
<11>[    1.357021] <0> (1)[1:init]init: /init.mt8163.rc: 833: invalid option 'setprop'
<11>[    1.359382] <0> (1)[1:init]init: init.csm.project.rc: 79: invalid option 'chmod'
<11>[    1.359402] <0> (1)[1:init]init: init.csm.project.rc: 80: invalid option 'chown'
<11>[    1.359422] <0> (1)[1:init]init: init.csm.project.rc: 104: invalid option 'mknod'
<11>[    1.359439] <0> (1)[1:init]init: init.csm.project.rc: 105: invalid option 'chmod'
<11>[    1.359457] <0> (1)[1:init]init: init.csm.project.rc: 106: invalid option 'chown'
<11>[    1.359474] <0> (1)[1:init]init: init.csm.project.rc: 109: invalid option 'chmod'
<11>[    1.359491] <0> (1)[1:init]init: init.csm.project.rc: 110: invalid option 'chown'
<11>[    1.359508] <0> (1)[1:init]init: init.csm.project.rc: 112: invalid option 'chmod'
<11>[    1.359525] <0> (1)[1:init]init: init.csm.project.rc: 113: invalid option 'chown'
<11>[    1.359542] <0> (1)[1:init]init: init.csm.project.rc: 115: invalid option 'chmod'
<11>[    1.359559] <0> (1)[1:init]init: init.csm.project.rc: 116: invalid option 'chown'
<11>[    1.359576] <0> (1)[1:init]init: init.csm.project.rc: 118: invalid option 'chmod'
<11>[    1.359593] <0> (1)[1:init]init: init.csm.project.rc: 119: invalid option 'chown'
<11>[    1.359609] <0> (1)[1:init]init: init.csm.project.rc: 121: invalid option 'chmod'
<11>[    1.359626] <0> (1)[1:init]init: init.csm.project.rc: 122: invalid option 'chown'
<11>[    1.359644] <0> (1)[1:init]init: init.csm.project.rc: 125: invalid option 'chown'
<11>[    1.359661] <0> (1)[1:init]init: init.csm.project.rc: 126: invalid option 'chmod'
<11>[    1.359678] <0> (1)[1:init]init: init.csm.project.rc: 134: invalid option 'chown'
<11>[    1.359695] <0> (1)[1:init]init: init.csm.project.rc: 135: invalid option 'chown'
<11>[    1.359712] <0> (1)[1:init]init: init.csm.project.rc: 136: invalid option 'chown'
<11>[    1.359729] <0> (1)[1:init]init: init.csm.project.rc: 137: invalid option 'chown'
<11>[    1.359746] <0> (1)[1:init]init: init.csm.project.rc: 138: invalid option 'chown'
<11>[    1.359763] <0> (1)[1:init]init: init.csm.project.rc: 142: invalid option 'mkdir'
<11>[    1.359779] <0> (1)[1:init]init: init.csm.project.rc: 143: invalid option 'mkdir'
<11>[    1.359796] <0> (1)[1:init]init: init.csm.project.rc: 144: invalid option 'mkdir'
<11>[    1.359813] <0> (1)[1:init]init: init.csm.project.rc: 145: invalid option 'chown'
<11>[    1.359830] <0> (1)[1:init]init: init.csm.project.rc: 148: invalid option 'chmod'
<11>[    1.359847] <0> (1)[1:init]init: init.csm.project.rc: 149: invalid option 'chown'
<11>[    1.359863] <0> (1)[1:init]init: init.csm.project.rc: 150: invalid option 'chmod'
<11>[    1.359880] <0> (1)[1:init]init: init.csm.project.rc: 151: invalid option 'chown'
<11>[    1.359897] <0> (1)[1:init]init: init.csm.project.rc: 158: invalid option 'mknod'
<11>[    1.359914] <0> (1)[1:init]init: init.csm.project.rc: 159: invalid option 'chown'
<11>[    1.359931] <0> (1)[1:init]init: init.csm.project.rc: 160: invalid option 'chmod'
<11>[    1.359948] <0> (1)[1:init]init: init.csm.project.rc: 163: invalid option 'chown'
<11>[    1.359965] <0> (1)[1:init]init: init.csm.project.rc: 164: invalid option 'chmod'
<11>[    1.359982] <0> (1)[1:init]init: init.csm.project.rc: 171: invalid option 'setprop'
<11>[    1.360011] <0> (1)[1:init]init: init.csm.project.rc: 183: ignored duplicate definition of service 'fuse_usbotg'
<11>[    1.360207] <0> (1)[1:init]init: init.csm.project.rc: 303: ignored duplicate definition of service 'atci_service'
<11>[    1.360233] <0> (1)[1:init]init: init.csm.project.rc: 309: ignored duplicate definition of service 'atcid-daemon-u'
<11>[    1.360258] <0> (1)[1:init]init: init.csm.project.rc: 315: ignored duplicate definition of service 'atcid-daemon-e'
<11>[    1.360287] <0> (1)[1:init]init: init.csm.project.rc: 324: ignored duplicate definition of service 'audio-daemon'
<11>[    1.360396] <0> (1)[1:init]init: init.csm.project.rc: 391: invalid option 'writepid'
<11>[    1.360967] <0> (1)[1:init]init: could not import file '/FWUpgradeInit.rc' from '/init.mt8163.rc'
<11>[    1.361053] <0> (1)[1:init]init: could not import file 'init.aee.rc' from '/init.mt8163.rc'
<11>[    1.361156] <0> (1)[1:init]init: could not import file 'init.no_ssd.rc' from '/init.mt8163.rc'
<11>[    1.361183] <0> (1)[1:init]init: could not import file 'init.ssd_nomuser.rc' from '/init.mt8163.rc'
<11>[    1.361208] <0> (1)[1:init]init: could not import file 'init.fon.rc' from '/init.mt8163.rc'
<11>[    1.361234] <0> (1)[1:init]init: could not import file 'init.volte.rc' from '/init.mt8163.rc'
<11>[    1.361463] <0> (1)[1:init]init: could not import file '/init.debug.rc' from '/init.rc'
<11>[    1.655110] <0> (1)[1:init]init: /dev/hw_random not found
<11>[    1.655188] <0> (1)[1:init]init: could not open /dev/keychord
<3>[    1.655325] <0> (1)[1:init][name:uart&][UARTX]:E:1158: Port :0 not support vfifo
<7>[    1.656955] <0> (1)[1:init]SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>[    1.657261] <0> (1)[1:init]SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    1.659004] <0> (1)[1:init]SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    1.659165] <0> (1)[1:init]SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    1.660845] <0> (1)[1:init]SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>[    1.663607] <0> (1)[1:init]SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    1.663739] <0> (1)[1:init]SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    1.664007] <0> (1)[1:init]SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    1.664335] <0> (1)[1:init]SELinux: initialized (dev tmpfs, type tmpfs), uses mountpoint labeling
<11>[    1.665193] <0> (1)[1:init]init: /dev/hw_random not found
<7>[    1.666327] <0> (1)[1:init]SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
<11>[    1.668233] <0> (2)[144:resize_ext4]resize: Size for partition(/dev/block/platform/mtk-msdc.0/by-name/userdata) is 1294319K.
<11>[    1.668257] <0> (2)[144:resize_ext4]resize: Size in superblock is 1293292K.
<11>[    1.668273] <0> (2)[144:resize_ext4]resize: There is key in footer of partition(/dev/block/platform/mtk-msdc.0/by-name/userdata).
<11>[    1.668290] <0> (2)[144:resize_ext4]resize: Size will (maybe) resize to(after adjust) is 1293292K.
<11>[    1.668307] <0> (2)[144:resize_ext4]resize: The size of data already meet the request(size in superblock = size after adjust).
<11>[    1.668556] <0> (2)[144:resize_ext4]resize: Partition has been resized,so nothing to do!
<11>[    1.668573] <0> (2)[144:resize_ext4]resize: Resize ext4 return 0
<11>[    1.669212] <0> (0)[147:init]fs_mgr: Warning: unknown flag resize
<14>[    1.669417] <0> (0)[147:init]amzn_fos: ADB: eng_device=0
<14>[    1.669482] <0> (0)[147:init]amzn_fos: ADB: unlocked_kernel=1
<14>[    1.669557] <0> (0)[147:init]amzn_fos: ADB: flags=0xa3
<14>[    1.669572] <0> (0)[147:init]fs_mgr: Verity disabled by fos flag
<6>[    1.672828] <0> (1)[147:init]EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: commit=1,nodelalloc,discard,errors=remount-ro
<7>[    1.672864] <0> (1)[147:init]SELinux: initialized (dev mmcblk0p14, type ext4), uses xattr
<14>[    1.672940] <0> (1)[147:init]fs_mgr: __mount(source=/dev/block/platform/mtk-msdc.0/by-name/system_b,target=/system,type=ext4)=0
<4>[    1.673408] <0> (1)[147:init]EXT4-fs (mmcblk0p16): Ignoring removed nomblk_io_submit option
<6>[    1.690387] <0> (1)[147:init]EXT4-fs (mmcblk0p16): recovery complete
<6>[    1.691015] <0> (1)[147:init]EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[    1.691042] <0> (1)[147:init]SELinux: initialized (dev mmcblk0p16, type ext4), uses xattr
<14>[    1.691117] <0> (1)[147:init]fs_mgr: check_fs(): mount(/dev/block/platform/mtk-msdc.0/by-name/userdata,/data,ext4)=0
<14>[    1.728440] <0> (0)[147:init]fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/mtk-msdc.0/by-name/userdata
<14>[    1.767092] <0> (0)[147:init]e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<14>[    1.767195] <0> (0)[147:init]e2fsck: /dev/block/platform/mtk-msdc.0/by-name/userdata: clean, 2560/80960 files, 156339/323323 blocks
<6>[    1.771124] <0> (1)[147:init]EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: commit=1,noauto_da_alloc,discard
<7>[    1.771173] <0> (1)[147:init]SELinux: initialized (dev mmcblk0p16, type ext4), uses xattr
<14>[    1.771279] <0> (1)[147:init]fs_mgr: __mount(source=/dev/block/platform/mtk-msdc.0/by-name/userdata,target=/data,type=ext4)=0
<4>[    1.772164] <0> (1)[147:init]EXT4-fs (mmcblk0p15): Ignoring removed nomblk_io_submit option
<6>[    1.773996] <0> (1)[147:init]EXT4-fs (mmcblk0p15): recovery complete
<6>[    1.774028] <0> (1)[147:init]EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[    1.774065] <0> (1)[147:init]SELinux: initialized (dev mmcblk0p15, type ext4), uses xattr
<14>[    1.774153] <0> (1)[147:init]fs_mgr: check_fs(): mount(/dev/block/platform/mtk-msdc.0/by-name/cache,/cache,ext4)=0
<14>[    1.807673] <0> (0)[147:init]fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/mtk-msdc.0/by-name/cache
<14>[    1.821201] <0> (0)[147:init]e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<14>[    1.821274] <0> (0)[147:init]e2fsck: /dev/block/platform/mtk-msdc.0/by-name/cache: clean, 19/50176 files, 6533/200704 blocks
<6>[    1.823923] <0> (1)[147:init]EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: commit=1,noauto_da_alloc,discard
<7>[    1.823973] <0> (1)[147:init]SELinux: initialized (dev mmcblk0p15, type ext4), uses xattr
<14>[    1.824058] <0> (1)[147:init]fs_mgr: __mount(source=/dev/block/platform/mtk-msdc.0/by-name/cache,target=/cache,type=ext4)=0
<11>[    1.826782] <0> (1)[162:init]init: cannot exec '/system/etc/partition_permission.sh': Permission denied
<11>[    1.836866] <0> (0)[1:init]fs_mgr: Warning: unknown flag resize
<6>[    1.837899] <0> (0)[1:init]zram0: detected capacity change from 0 to 268435456
<6>[    1.867887] <0> (1)[1:init][name:swapfile&]Adding 262140k swap on /dev/block/zram0.  Priority:-1 extents:1 across:262140k SS
<5>[    1.919343] <0> (3)[166:dbus-daemon]random: dbus-daemon urandom read with 29 bits of entropy available
<5>[    1.924336] <0> (3)[166:dbus-daemon][name:audit&]audit: type=1400 audit(1262304008.270:4): avc:  denied  { search } for  pid=166 comm="dbus-daemon" name="167" dev="proc" ino=8806 scontext=u:r:dbus-daemon:s0 tcontext=u:r:avahi-daemon:s0 tclass=dir permissive=0
<12>[    1.992372] <0> (1)[1:init]selinux_android_load_policy_helper: SELinux policy on userdata not supported
<6>[    2.053425] <0> (2)[171:rpmb_svc][name:capability&]capability: warning: `rpmb_svc' uses deprecated v2 capabilities in a way that may be insecure
<4>[    2.136671] <0> (2)[118:kworker/2:1][name:mtk_wcn_stub_alps&][cmb_stub] thermal_ctrl_cb null
<11>[    2.290321] <0> (1)[1:init]init: Warning!  Service models_fix needs a SELinux domain defined; please fix!
<6>[    2.365609] <0> (3)[180:ledctrl][name:binder&]binder: 180:180 binder_context_mgr_node is NULL
<6>[    2.365632] <0> (3)[180:ledctrl][name:binder&]binder: 180:180 transaction failed 29189, size 0-0
<3>[    2.365648] <0> (3)[180:ledctrl][name:binder&]binder: read put err 29189 to user 0000007f993619c8, thread error 29189:29185
<7>[    2.396145] <0> (1)[1:init][name:trace&][ftrace]start reading trace file
<7>[    2.426818] <0> (1)[1:init][name:trace&][ftrace]end reading trace file
<7>[    2.427374] <0> (1)[1:init][name:trace&][ftrace]start reading trace file
<6>[    2.453180] <0> (3)[190:meshmgrservice][name:binder&]binder: 182:190 binder_context_mgr_node is NULL
<6>[    2.453215] <0> (3)[190:meshmgrservice][name:binder&]binder: 182:190 transaction failed 29189, size 0-0
<3>[    2.453238] <0> (3)[190:meshmgrservice][name:binder&]binder: read put err 29189 to user 00000000f7e7c018, thread error 29189:29185
<7>[    2.466785] <0> (1)[1:init][name:trace&][ftrace]end reading trace file
<6>[    2.479281] <0> (1)[193:healthd][name:binder&]binder: 193:193 binder_context_mgr_node is NULL
<6>[    2.479308] <0> (1)[193:healthd][name:binder&]binder: 193:193 transaction failed 29189, size 0-0
<3>[    2.479327] <0> (1)[193:healthd][name:binder&]binder: read put err 29189 to user 000000000be65838, thread error 29189:29185
<11>[    2.481473] <0> (1)[1:init]init: cannot find '/system/bin/boot_logo_updater', disabling 'bootlogoupdater'
<11>[    2.482559] <0> (1)[1:init]init: cannot find '/system/bin/featured', disabling 'featured'
<11>[    2.486852] <0> (3)[199:init]init: cannot setexeccon('u:r:enableswap:s0'): Invalid argument
<3>[    2.487776] <0> (1)[1:init][name:fork&][1:init] fork fail retval:0xfffffdff
<3>[    2.487802] <0> (1)[1:init][name:fork&][1:init] fork fail:[fffffffffffffdff, -513]
<11>[    2.488240] <0> (1)[1:init]init: cannot find '/system/bin/factoryadb.sh', disabling 'factoryadb'
<11>[    2.490830] <0> (1)[1:init]init: cannot find '/system/bin/xlog', disabling 'xlogboot'
<4>[    2.498489] <0> (1)[1:init]USB_ACMgs_open: ttyGS0 (ffffffc01ca8e000,ffffffc01bcd6000)
<4>[    2.498529] <0> (1)[1:init]USB_ACMgs_close: ttyGS0 (ffffffc01ca8e000,ffffffc01bcd6000) ...
<6>[    2.499630] <0> (2)[202:wmt_loader][name:mtk_wcn_stub_alps&]set current consys chipid (0x8163)
<4>[    2.504667] <0> (1)[1:init]USB_ACMgs_open: ttyGS0 (ffffffc01ca8e000,ffffffc01bcd6800)
<4>[    2.504708] <0> (1)[1:init]USB_ACMgs_close: ttyGS0 (ffffffc01ca8e000,ffffffc01bcd6800) ...
<4>[    2.504851] <0> (1)[1:init]USB_ACMgs_open: ttyGS1 (ffffffc01ca8e000,ffffffc01bcd6900)
<4>[    2.504875] <0> (1)[1:init]USB_ACMgs_close: ttyGS1 (ffffffc01ca8e000,ffffffc01bcd6900) ...
<4>[    2.504963] <0> (1)[1:init]USB_ACMgs_open: ttyGS1 (ffffffc01ca8e000,ffffffc01bcd6a00)
<4>[    2.504986] <0> (1)[1:init]USB_ACMgs_close: ttyGS1 (ffffffc01ca8e000,ffffffc01bcd6a00) ...
<4>[    2.505075] <0> (1)[1:init]USB_ACMgs_open: ttyGS2 (ffffffc01ca8e000,ffffffc01bcd6b00)
<4>[    2.505098] <0> (1)[1:init]USB_ACMgs_close: ttyGS2 (ffffffc01ca8e000,ffffffc01bcd6b00) ...
<4>[    2.505182] <0> (1)[1:init]USB_ACMgs_open: ttyGS2 (ffffffc01ca8e000,ffffffc01bcd6c00)
<4>[    2.505208] <0> (1)[1:init]USB_ACMgs_close: ttyGS2 (ffffffc01ca8e000,ffffffc01bcd6c00) ...
<4>[    2.505292] <0> (1)[1:init]USB_ACMgs_open: ttyGS3 (ffffffc01ca8e000,ffffffc01bcd6d00)
<4>[    2.505315] <0> (1)[1:init]USB_ACMgs_close: ttyGS3 (ffffffc01ca8e000,ffffffc01bcd6d00) ...
<4>[    2.505396] <0> (1)[1:init]USB_ACMgs_open: ttyGS3 (ffffffc01ca8e000,ffffffc01bcd6e00)
<4>[    2.505419] <0> (1)[1:init]USB_ACMgs_close: ttyGS3 (ffffffc01ca8e000,ffffffc01bcd6e00) ...
<11>[    2.515543] <0> (1)[1:init]init: cannot find '/system/bin/recovery_reporter', disabling 'post-recovery'
<11>[    2.519426] <0> (2)[1:init]init: cannot find '/system/bin/met_log_d', disabling 'met_log_d'
<11>[    2.519482] <0> (2)[1:init]init: cannot find '/system/bin/pq', disabling 'pq'
<11>[    2.519514] <0> (2)[1:init]init: cannot find '/system/bin/aal', disabling 'aal'
<11>[    2.519558] <0> (2)[1:init]init: cannot find '/system/bin/dm_agent_binder', disabling 'DMAgent'
<11>[    2.519588] <0> (2)[1:init]init: cannot find '/system/bin/ppl_agent', disabling 'PPLAgent'
<11>[    2.519619] <0> (2)[1:init]init: cannot find '/system/bin/vtservice', disabling 'vtservice'
<11>[    2.519649] <0> (2)[1:init]init: cannot find '/system/bin/cmmbsp', disabling 'cmmb'
<11>[    2.519679] <0> (2)[1:init]init: cannot find '/system/bin/mtk_agpsd', disabling 'agpsd'
<11>[    2.519709] <0> (2)[1:init]init: cannot find '/system/bin/wifi2agps', disabling 'wifi2agps'
<11>[    2.519743] <0> (2)[1:init]init: cannot find '/system/xbin/mnld', disabling 'mnld'
<11>[    2.519782] <0> (2)[1:init]init: cannot find '/system/bin/extmdlogger', disabling 'extmdlogger'
<11>[    2.519812] <0> (2)[1:init]init: cannot find '/system/bin/GoogleOtaBinder', disabling 'GoogleOtaAgent'
<11>[    2.520525] <0> (2)[1:init]init: cannot find '/system/bin/nvram_agent_binder', disabling 'NvRAMAgent'
<11>[    2.521107] <0> (2)[1:init]init: cannot find '/system/bin/thermal', disabling 'thermal'
<11>[    2.521144] <0> (2)[1:init]init: cannot find '/system/bin/thermald', disabling 'thermald'
<11>[    2.521175] <0> (2)[1:init]init: cannot find '/system/bin/sn', disabling 'sn'
<11>[    2.521206] <0> (2)[1:init]init: cannot find '/system/bin/poad', disabling 'poad'
<11>[    2.521235] <0> (2)[1:init]init: cannot find '/system/bin/batterywarning', disabling 'batterywarning'
<11>[    2.521265] <0> (2)[1:init]init: cannot find '/system/bin/br_app_data_service', disabling 'backuprestore'
<11>[    2.521294] <0> (2)[1:init]init: cannot find '/system/bin/MtkCodecService', disabling 'MtkCodecService'
<11>[    2.521324] <0> (2)[1:init]init: cannot find '/system/bin/guiext-server', disabling 'guiext-server'
<11>[    2.521360] <0> (2)[1:init]init: cannot find '/system/bin/OperaMaxSystem', disabling 'OperaMaxSystem'
<11>[    2.524453] <0> (2)[1:init]init: cannot find '/system/bin/trackerd', disabling 'trackerd'
<11>[    2.527609] <0> (2)[1:init]init: cannot find '/system/bin/mtkbt', disabling 'mtkbt'
<3>[    2.528265] <0> (2)[1:init][name:fork&][1:init] fork fail retval:0xfffffdff
<3>[    2.528285] <0> (2)[1:init][name:fork&][1:init] fork fail:[fffffffffffffdff, -513]
<11>[    2.530396] <0> (2)[1:init]init: cannot find '/system/bin/em_svr', disabling 'emsvr_user'
<5>[    2.541161] <0> (2)[1:init][name:g_android&][g_android][USB]enable_store: device_attr->attr.name: enable
<3>[    2.541185] <0> (2)[1:init][name:g_android&][g_android]android_usb: already disabled
<5>[    2.541352] <0> (2)[1:init][name:g_android&][g_android][USB]functions_store
<5>[    2.541364] <0> (2)[1:init][name:g_android&][g_android][USB]functions_store: name = adb
<5>[    2.541376] <0> (2)[1:init][name:g_android&][g_android][USB]android_enable_function: name = ffs, f->name=ffs
<5>[    2.541425] <0> (2)[1:init][name:g_android&][g_android][USB]enable_store: device_attr->attr.name: enable
<5>[    2.541437] <0> (2)[1:init][name:g_android&][g_android][USB]enable function 'ffs'/ffffffc000c5ab30
<5>[    2.541448] <0> (2)[1:init][name:g_android&][g_android][USB]enable_store: enable 0->1 case, device_desc.idVendor = 0x18d1, device_desc.idProduct = 0x4ee7
<5>[    2.542016] <0> (2)[1:init][name:g_android&][g_android][USB]enable_store: device_attr->attr.name: enable
<5>[    2.542034] <0> (2)[1:init][name:g_android&][g_android][USB]enable_store: enable 1->0 case, device_desc.idVendor = 0x18d1, device_desc.idProduct = 0x4ee7
<5>[    2.542046] <0> (2)[1:init][name:g_android&][g_android][USB]disable function 'ffs'/ffffffc000c5ab30
<5>[    2.542193] <0> (2)[1:init][name:g_android&][g_android][USB]functions_store
<5>[    2.542207] <0> (2)[1:init][name:g_android&][g_android][USB]functions_store: name = adb
<5>[    2.542217] <0> (2)[1:init][name:g_android&][g_android][USB]android_enable_function: name = ffs, f->name=ffs
<5>[    2.542266] <0> (2)[1:init][name:g_android&][g_android][USB]enable_store: device_attr->attr.name: enable
<5>[    2.542278] <0> (2)[1:init][name:g_android&][g_android][USB]enable function 'ffs'/ffffffc000c5ab30
<5>[    2.542289] <0> (2)[1:init][name:g_android&][g_android][USB]enable_store: enable 0->1 case, device_desc.idVendor = 0x1949, device_desc.idProduct = 0x110
<11>[    2.542627] <0> (2)[1:init]init: cannot find '/system/bin/xlog', disabling 'xlogdebugchanged'
<11>[    2.543451] <0> (2)[210:vpartition]vp: ******* running vpartition ***********
<11>[    2.547755] <0> (1)[196:vold]fs_mgr: Warning: unknown flag resize
<5>[    2.558002] <0> (0)[239:adbd][name:audit&]audit: type=1405 audit(1262304008.910:5): bool=device_unlocked val=1 old_val=0 auid=4294967295 ses=4294967295
<4>[    2.559873] <0> (0)[202:wmt_loader][name:stp_chrdev_bt&][MTK-BT] BT_init: mtk_stp_BT_chrdev driver(major 192) installed
<3>[    2.559893] <0> (0)[202:wmt_loader][name:conn_drv_init&][WCN-MOD-INIT][E]do_connectivity_driver_init(62):do common driver init failed, ret:-1
<4>[    2.559996] <0> (0)[202:wmt_loader][MTK-WIFI] WIFI_init: mtk_wmt_WIFI_chrdev driver(major 153) installed.
<4>[    2.560043] <0> (0)[202:wmt_loader][wlan]createWirelessDevice:(INIT ERROR)The num_different_channels is 2
<6>[    2.617566] <0> (3)[243:adbd][name:g_android&][g_android]read descriptors
<6>[    2.617593] <0> (3)[243:adbd][name:g_android&][g_android]read strings
<5>[    2.617622] <0> (3)[243:adbd][name:g_android&][g_android][USB]android_bind_enabled_functions:
<5>[    2.617632] <0> (3)[243:adbd][name:g_android&][g_android][USB]bind_config function 'ffs'/ffffffc000c5ab30
<6>[    2.617659] <0> (3)[243:adbd]android_usb gadget: cfg 1/ffffffc000c5a9e0 speeds: high full
<4>[    2.628587] <0> (3)[243:adbd]usb phy read default eye value, Addr: 0x5=0x77
<4>[    2.628603] <0> (3)[243:adbd]usb phy read eye value after set, Addr: 0x5=0x77
<6>[    2.669997] <0> (2)[210:vpartition]EXT4-fs (loop0): recovery complete
<6>[    2.670022] <0> (2)[210:vpartition]EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
<7>[    2.670043] <0> (2)[210:vpartition]SELinux: initialized (dev loop0, type ext4), uses xattr
<11>[    2.670169] <0> (2)[210:vpartition]vp: successfully mounted /dev/block/loop0 at /data/metrics
<7>[    2.761011] <0> (2)[233:sdcard]SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
<3>[    2.810532] <0> (0)[238:mtk_wmtd][name:osal&][WMT-CORE][E]opfunc_hif_conf(841):WMT-CORE: WMT HIF info added
<4>[    2.811550] <0> (3)[238:mtk_wmtd][name:domain&]conn: Power-on latency exceeded, new value 8154 ns
<3>[    2.811632] <0> (3)[222:thermal_manager][name:mtk_wcn_consys_hw&][WMT-CONSYS-HW][E]mtk_wcn_consys_hw_reg_ctrl(550):Read CONSYS chipId(0x00000000)
<3>[    2.825747] <0> (3)[222:thermal_manager][name:osal&][WMT-LIB][E]wmt_lib_is_therm_ctrl_support(1194):thermal command can not be send: STP is not ready
<3>[    2.825772] <0> (3)[222:thermal_manager][name:osal&][WMT-EXP][E]_mtk_wcn_wmt_therm_ctrl(207):thermal ctrl function not supported
<3>[    2.825782] <0> (3)[222:thermal_manager][name:osal&][WMT-LIB][E]wmt_lib_is_therm_ctrl_support(1194):thermal command can not be send: STP is not ready
<3>[    2.825793] <0> (3)[222:thermal_manager][name:osal&][WMT-EXP][E]_mtk_wcn_wmt_therm_ctrl(207):thermal ctrl function not supported
<3>[    2.825803] <0> (3)[222:thermal_manager][name:osal&][WMT-LIB][E]wmt_lib_is_therm_ctrl_support(1194):thermal command can not be send: STP is not ready
<3>[    2.825814] <0> (3)[222:thermal_manager][name:osal&][WMT-EXP][E]_mtk_wcn_wmt_therm_ctrl(207):thermal ctrl function not supported
<3>[    2.897465] <0> (0)[238:mtk_wmtd][name:btif&]MTK-BTIF-EXP[I]mtk_wcn_btif_open:p_btif(0xffffffc000c431f8)
<3>[    2.897490] <0> (0)[238:mtk_wmtd][name:btif&]MTK-BTIF-EXP[I]mtk_wcn_btif_open:owner name:CONSYS_STP, recorded name:CONSYS_STP
<3>[    2.897514] <0> (0)[238:mtk_wmtd][name:btif&]MTK-BTIF[I]_btif_lpbk_ctrl:loopback function disabled
<3>[    2.897567] <0> (0)[238:mtk_wmtd][name:btif&]MTK-BTIF[I]_btif_controller_setup:succeed
<3>[    2.897611] <0> (0)[238:mtk_wmtd][name:btif&]MTK-BTIF[I]_btif_tx_dma_setup:succeed
<3>[    2.897653] <0> (0)[238:mtk_wmtd][name:btif&]MTK-BTIF[I]_btif_rx_dma_setup:succeed
<3>[    2.897666] <0> (0)[238:mtk_wmtd][name:btif&]MTK-BTIF[I]btif_log_buf_reset:reset Tx log buffer
<3>[    2.897677] <0> (0)[238:mtk_wmtd][name:btif&]MTK-BTIF[I]btif_log_buf_reset:reset Rx log buffer
<3>[    2.897687] <0> (0)[238:mtk_wmtd][name:btif&]MTK-BTIF[I]btif_open:BTIF's Tx Mode:1, Rx Mode(1)
<3>[    2.897697] <0> (0)[238:mtk_wmtd][name:btif&]MTK-BTIF-EXP[I]mtk_wcn_btif_open:btif_open succeed
<5>[    2.964310] <0> (0)[32:kworker/0:1][name:g_android&][g_android][USB]android_work: is_hwconnected=1
<5>[    2.964372] <0> (0)[32:kworker/0:1][name:g_android&][g_android][USB]android_work: sent uevent USB_STATE=CONNECTED
<5>[    2.964382] <0> (0)[32:kworker/0:1][name:g_android&][g_android][USB]android_work: did not send zero uevent
<5>[    2.993108] <0> (0)[0:swapper/0][name:g_android&][g_android][USB]android_disconnect:
<5>[    2.993137] <0> (0)[0:swapper/0][name:g_android&][g_android][USB]android_disconnect: dev->connected = 0
<6>[    2.993151] <0> (0)[0:swapper/0]android_usb gadget: [COM]composite_disconnect: reassign the complete function!!
<5>[    2.993195] <0> (0)[32:kworker/0:1][name:g_android&][g_android][USB]android_work: is_hwconnected=1
<5>[    2.993246] <0> (0)[32:kworker/0:1][name:g_android&][g_android][USB]android_work: sent uevent USB_STATE=DISCONNECTED
<5>[    2.993257] <0> (0)[32:kworker/0:1][name:g_android&][g_android][USB]android_work: did not send zero uevent
<6>[    3.050653] <0> (0)[321:tinymix][name:amzn_mt_spi&]transfer_timestamps_get: = 0
<6>[    3.050732] <0> (0)[321:tinymix][name:amzn_mt_spi&]transfer_timestamps_set: transfer_timestamps_enab=0
<12>[    3.061916] <0> (0)[326:logd]****LOGD_PUBLISHER****: added new subscriber LOG_DUMPER (0x7faebc7390)
<12>[    3.061996] <0> (0)[326:logd]****LOGD_PUBLISHER****: added new subscriber METRICS_SUBSCRIBER (0x7faebc8c00)
<12>[    3.062074] <0> (0)[326:logd]****LOGD_PUBLISHER****: added new subscriber SPAM_DETECTOR (0x7faebc9000)
<12>[    3.067859] <0> (2)[335:logd.LOG_DUMPER]****LOGD_SUBSCRIBER****: starting LOG_DUMPER service!
<12>[    3.067919] <0> (2)[336:logd.METRICS_SU]****LOGD_SUBSCRIBER****: starting METRICS_SUBSCRIBER service!
<12>[    3.076759] <0> (0)[329:logd.proxy]****LOGD_KERNEL_PROXY****: starting metrics proxy thread! fd 9
<12>[    3.079767] <0> (0)[330:logd.proxy]****LOGD_KERNEL_PROXY****: starting vitals proxy thread! fd 13
<12>[    3.080687] <0> (0)[328:logd.proxy]****LOGD_KERNEL_PROXY****: starting kernel proxy thread! fd 7
<12>[    3.085268] <0> (2)[337:logd.SPAM_DETEC]****LOGD_SUBSCRIBER****: starting SPAM_DETECTOR service!
<12>[    3.085310] <0> (2)[337:logd.SPAM_DETEC]****LOGD_BASE****: SPAM_DETECTOR is successfully initialized
<5>[    3.088255] <0> (0)[32:kworker/0:1][name:g_android&][g_android][USB]android_work: is_hwconnected=1
<5>[    3.088348] <0> (0)[32:kworker/0:1][name:g_android&][g_android][USB]android_work: sent uevent USB_STATE=CONNECTED
<5>[    3.088373] <0> (0)[32:kworker/0:1][name:g_android&][g_android][USB]android_work: did not send zero uevent
<6>[    3.090780] <0> (0)[107:boot_animation_]android_usb gadget: high-speed config #1: android
<6>[    3.090823] <0> (0)[107:boot_animation_]android_usb gadget: [COM]USB_REQ_SET_CONFIGURATION: value=0
<5>[    3.090857] <0> (0)[32:kworker/0:1][name:g_android&][g_android][USB]android_work: is_hwconnected=1
<5>[    3.090915] <0> (0)[32:kworker/0:1][name:g_android&][g_android][USB]android_work: sent uevent USB_STATE=CONFIGURED
<5>[    3.090925] <0> (0)[32:kworker/0:1][name:g_android&][g_android][USB]android_work: did not send zero uevent
<3>[    3.136695] <0> (2)[118:kworker/2:1][name:osal&][WMT-LIB][E]wmt_lib_is_therm_ctrl_support(1194):thermal command can not be send: STP is not ready
<3>[    3.136717] <0> (2)[118:kworker/2:1][name:osal&][WMT-EXP][E]_mtk_wcn_wmt_therm_ctrl(207):thermal ctrl function not supported
<3>[    3.136728] <0> (2)[118:kworker/2:1][name:osal&][WMT-LIB][E]wmt_lib_is_therm_ctrl_support(1194):thermal command can not be send: STP is not ready
<3>[    3.136739] <0> (2)[118:kworker/2:1][name:osal&][WMT-EXP][E]_mtk_wcn_wmt_therm_ctrl(207):thermal ctrl function not supported
<3>[    3.136749] <0> (2)[118:kworker/2:1][name:osal&][WMT-LIB][E]wmt_lib_is_therm_ctrl_support(1194):thermal command can not be send: STP is not ready
<3>[    3.136760] <0> (2)[118:kworker/2:1][name:osal&][WMT-EXP][E]_mtk_wcn_wmt_therm_ctrl(207):thermal ctrl function not supported
<12>[    3.156524] <0> (2)[337:logd.SPAM_DETEC]****SPAM_DETECTOR****: the component Kernel is spamming the log with 215 collisions in 500 milliseconds
<12>[    3.328149] <0> (2)[336:logd.METRICS_SU]****LOGD_METRICS_HANDLER****: /data/metrics/dedicated.db is opened
<12>[    3.328181] <0> (2)[336:logd.METRICS_SU]****LOGD_BASE****: METRICS_SUBSCRIBER is successfully initialized
<12>[    3.420478] <0> (2)[335:logd.LOG_DUMPER]****LOGD_BASE****: LOG_DUMPER is successfully initialized
<11>[    3.480398] <0> (1)[193:healthd]healthd: Could not open '/etc/monitoring.conf'
<11>[    3.480425] <0> (1)[193:healthd]healthd: No charger supplies found
<12>[    3.480439] <0> (1)[193:healthd]healthd: No battery devices found
<12>[    3.511005] <0> (1)[337:logd.SPAM_DETEC]****SPAM_DETECTOR****: the component Kernel is spamming the log with 763 collisions in 500 milliseconds
<4>[    3.520120] <0> (1)[238:mtk_wmtd][name:osal&][STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<5>[    4.030232] <0> (0)[0:swapper/0][name:random&]random: nonblocking pool is initialized
<7>[    5.309079] <0> (1)[228:main]SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<6>[    5.471658] <0> (0)[556:main][name:capability&]capability: warning: `main' uses 32-bit capabilities (legacy support in use)
<6>[    5.576766] <0> (2)[359:kworker/2:2][name:mmc_core&]Trying to read Samsung eMMC stats
<6>[    5.661900] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    5.719594] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    5.770531] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    5.821510] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    5.872491] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    5.923500] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    5.974459] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    6.025429] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    6.076673] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    6.127622] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    6.178793] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    6.229759] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    6.280710] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    6.331664] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    6.382617] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<5>[    6.387323] <0> (0)[64:hps_main][name:smp&]CPU3: shutdown
<6>[    6.433612] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    6.484568] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    6.535522] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    6.586479] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    6.637502] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    6.688441] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    6.739601] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    6.790576] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    6.841754] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    6.892741] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    6.943738] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    6.994741] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    7.045736] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    7.096713] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    7.147683] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    7.198667] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    7.249687] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    7.300621] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    7.351555] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    7.402465] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    7.453376] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    7.504357] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    7.555279] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    7.606195] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    7.657099] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    7.708015] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[    7.758954] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    7.809880] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    7.860783] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    7.911706] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    7.962608] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    8.013523] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    8.064431] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    8.115369] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    8.166358] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    8.217300] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    8.287234] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    8.338186] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<5>[    8.387323] <0> (1)[64:hps_main][name:smp&]CPU2: shutdown
<6>[    8.389110] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[    8.440033] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (2 <= 10)
<6>[    8.490972] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (2 <= 10)
<6>[    8.541939] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (2 <= 10)
<4>[    8.577423] <0> (1)[219:mediaserver][name:audit&]audit: audit_lost=1 audit_rate_limit=20 audit_backlog_limit=64
<3>[    8.577442] <0> (1)[219:mediaserver][name:audit&]audit: rate limit exceeded
<6>[    8.592905] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (2 <= 10)
<3>[    8.634074] <0> (1)[219:mediaserver][name:mt_gpt&]mt_xgpt_mmap, phy_addr is 0000000010008000
<6>[    8.643890] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (2 <= 10)
<4>[    8.686947] <0> (2)[0:swapper/2]CPU2: Booted secondary processor
<6>[    8.686969] <0> (2)[0:swapper/2][name:cpuinfo&]Detected VIPT I-cache on CPU2
<6>[    8.687016] <0> (2)[0:swapper/2][name:topology&]CPU2: update cpu_capacity 1024
<6>[    8.694856] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (2 <= 10)
<6>[    8.745814] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (2 <= 10)
<6>[    8.746683] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (2 <= 10)
<12>[    8.747736] <0> (1)[337:logd.SPAM_DETEC]****SPAM_DETECTOR****: the component AudioALSADeviceParser is spamming the log with 221 collisions in 500 milliseconds
<12>[    8.747774] <0> (1)[337:logd.SPAM_DETEC]****SPAM_DETECTOR****: the component AUDIOALG is spamming the log with 899 collisions in 500 milliseconds
<6>[    9.747578] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<5>[   10.687320] <0> (1)[64:hps_main][name:smp&]CPU2: shutdown
<6>[   10.748536] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   11.749484] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<4>[   11.986966] <0> (2)[0:swapper/2]CPU2: Booted secondary processor
<6>[   11.986988] <0> (2)[0:swapper/2][name:cpuinfo&]Detected VIPT I-cache on CPU2
<6>[   11.987036] <0> (2)[0:swapper/2][name:topology&]CPU2: update cpu_capacity 1024
<4>[   12.186945] <0> (3)[0:swapper/3]CPU3: Booted secondary processor
<6>[   12.186968] <0> (3)[0:swapper/3][name:cpuinfo&]Detected VIPT I-cache on CPU3
<6>[   12.187016] <0> (3)[0:swapper/3][name:topology&]CPU3: update cpu_capacity 1024
<6>[   12.750417] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   13.751366] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   14.752379] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   15.753369] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<12>[   15.764781] <0> (1)[337:logd.SPAM_DETEC]****SPAM_DETECTOR****: the component PackageManager is spamming the log with 116 collisions in 500 milliseconds
<5>[   16.387676] <0> (0)[64:hps_main][name:smp&]CPU3: shutdown
<12>[   16.396814] <0> (2)[337:logd.SPAM_DETEC]****SPAM_DETECTOR****: the component PackageManager is spamming the log with 134 collisions in 500 milliseconds
<6>[   16.754358] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<12>[   16.833584] <0> (0)[193:healthd]healthd: battery none chg=a
<4>[   17.085894] <0> (0)[194:lmkd][name:lowmemorykiller&]lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
<4>[   17.085915] <0> (0)[194:lmkd][name:lowmemorykiller&]lowmemorykiller: oom_adj 0 => oom_score_adj 0
<4>[   17.085926] <0> (0)[194:lmkd][name:lowmemorykiller&]lowmemorykiller: oom_adj 1 => oom_score_adj 58
<4>[   17.085935] <0> (0)[194:lmkd][name:lowmemorykiller&]lowmemorykiller: oom_adj 2 => oom_score_adj 117
<4>[   17.085945] <0> (0)[194:lmkd][name:lowmemorykiller&]lowmemorykiller: oom_adj 3 => oom_score_adj 176
<4>[   17.085954] <0> (0)[194:lmkd][name:lowmemorykiller&]lowmemorykiller: oom_adj 9 => oom_score_adj 529
<4>[   17.085963] <0> (0)[194:lmkd][name:lowmemorykiller&]lowmemorykiller: oom_adj 15 => oom_score_adj 1000
<4>[   17.486945] <0> (3)[0:swapper/3]CPU3: Booted secondary processor
<6>[   17.486967] <0> (3)[0:swapper/3][name:cpuinfo&]Detected VIPT I-cache on CPU3
<6>[   17.487015] <0> (3)[0:swapper/3][name:topology&]CPU3: update cpu_capacity 1024
<6>[   17.755585] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (2 <= 10)
<6>[   18.756559] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   19.757497] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<5>[   20.087322] <0> (0)[64:hps_main][name:smp&]CPU3: shutdown
<4>[   20.586955] <0> (3)[0:swapper/3]CPU3: Booted secondary processor
<6>[   20.586980] <0> (3)[0:swapper/3][name:cpuinfo&]Detected VIPT I-cache on CPU3
<6>[   20.587028] <0> (3)[0:swapper/3][name:topology&]CPU3: update cpu_capacity 1024
<6>[   20.765929] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   21.766920] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   22.767885] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   23.768916] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   24.769936] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   25.776530] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   26.777559] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   27.778584] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   28.779520] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<5>[   29.187679] <0> (1)[64:hps_main][name:smp&]CPU3: shutdown
<6>[   29.780452] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<4>[   30.086947] <0> (3)[0:swapper/3]CPU3: Booted secondary processor
<6>[   30.086969] <0> (3)[0:swapper/3][name:cpuinfo&]Detected VIPT I-cache on CPU3
<6>[   30.087018] <0> (3)[0:swapper/3][name:topology&]CPU3: update cpu_capacity 1024
<6>[   30.781429] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   31.782400] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   32.783316] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   33.789688] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<12>[   33.796782] <0> (3)[337:logd.SPAM_DETEC]****SPAM_DETECTOR****: the component Kernel is now leaving the spam map after 30000 milliseconds
<6>[   34.790745] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   35.791751] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   36.792729] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<5>[   37.687330] <0> (0)[64:hps_main][name:smp&]CPU3: shutdown
<6>[   37.793697] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<4>[   37.886941] <0> (3)[0:swapper/3]CPU3: Booted secondary processor
<6>[   37.886965] <0> (3)[0:swapper/3][name:cpuinfo&]Detected VIPT I-cache on CPU3
<6>[   37.887012] <0> (3)[0:swapper/3][name:topology&]CPU3: update cpu_capacity 1024
<6>[   38.806551] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<12>[   39.466256] <0> (2)[337:logd.SPAM_DETEC]****SPAM_DETECTOR****: the component AudioALSADeviceParser is now leaving the spam map after 30000 milliseconds
<12>[   39.466295] <0> (2)[337:logd.SPAM_DETEC]****SPAM_DETECTOR****: the component AUDIOALG is now leaving the spam map after 30000 milliseconds
<6>[   39.807623] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   40.808602] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   41.809637] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   42.810594] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   43.821711] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   44.822638] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   45.823666] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<12>[   46.465787] <0> (3)[337:logd.SPAM_DETEC]****SPAM_DETECTOR****: the component PackageManager is now leaving the spam map after 30000 milliseconds
<6>[   46.824631] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   47.825578] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   48.837679] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   49.838694] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   50.839715] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   51.840763] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   52.841759] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<5>[   53.087308] <0> (0)[64:hps_main][name:smp&]CPU3: shutdown
<4>[   53.586940] <0> (3)[0:swapper/3]CPU3: Booted secondary processor
<6>[   53.586962] <0> (3)[0:swapper/3][name:cpuinfo&]Detected VIPT I-cache on CPU3
<6>[   53.587008] <0> (3)[0:swapper/3][name:topology&]CPU3: update cpu_capacity 1024
<6>[   53.853716] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   54.854702] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   55.855663] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   56.856619] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   57.857672] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   58.870695] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   59.871680] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<5>[   60.387351] <0> (0)[64:hps_main][name:smp&]CPU3: shutdown
<6>[   60.872651] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<4>[   60.886942] <0> (3)[0:swapper/3]CPU3: Booted secondary processor
<6>[   60.886964] <0> (3)[0:swapper/3][name:cpuinfo&]Detected VIPT I-cache on CPU3
<6>[   60.887010] <0> (3)[0:swapper/3][name:topology&]CPU3: update cpu_capacity 1024
<6>[   61.873614] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   62.874621] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   63.886573] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   64.887590] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<5>[   65.787329] <0> (0)[64:hps_main][name:smp&]CPU3: shutdown
<6>[   65.888548] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<4>[   66.186948] <0> (3)[0:swapper/3]CPU3: Booted secondary processor
<6>[   66.186971] <0> (3)[0:swapper/3][name:cpuinfo&]Detected VIPT I-cache on CPU3
<6>[   66.187021] <0> (3)[0:swapper/3][name:topology&]CPU3: update cpu_capacity 1024
<6>[   66.889494] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   67.890532] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   68.902653] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   69.903672] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   70.904647] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   71.905586] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   72.906542] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<5>[   73.087312] <0> (0)[64:hps_main][name:smp&]CPU3: shutdown
<4>[   73.386967] <0> (3)[0:swapper/3]CPU3: Booted secondary processor
<6>[   73.386992] <0> (3)[0:swapper/3][name:cpuinfo&]Detected VIPT I-cache on CPU3
<6>[   73.387044] <0> (3)[0:swapper/3][name:topology&]CPU3: update cpu_capacity 1024
<6>[   73.917692] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   74.918657] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   75.919603] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   76.920629] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   77.921684] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   78.934645] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   79.935678] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   80.936690] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   81.937668] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<5>[   82.087681] <0> (0)[64:hps_main][name:smp&]CPU3: shutdown
<6>[   82.938645] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<4>[   83.786938] <0> (3)[0:swapper/3]CPU3: Booted secondary processor
<6>[   83.786961] <0> (3)[0:swapper/3][name:cpuinfo&]Detected VIPT I-cache on CPU3
<6>[   83.787008] <0> (3)[0:swapper/3][name:topology&]CPU3: update cpu_capacity 1024
<6>[   83.950535] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   84.951515] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   85.952492] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<5>[   86.187321] <0> (0)[64:hps_main][name:smp&]CPU3: shutdown
<4>[   86.386940] <0> (3)[0:swapper/3]CPU3: Booted secondary processor
<6>[   86.386962] <0> (3)[0:swapper/3][name:cpuinfo&]Detected VIPT I-cache on CPU3
<6>[   86.387008] <0> (3)[0:swapper/3][name:topology&]CPU3: update cpu_capacity 1024
<6>[   86.953566] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   87.954600] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   88.965436] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<5>[   89.787347] <0> (2)[64:hps_main][name:smp&]CPU3: shutdown
<6>[   89.966425] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<4>[   90.186938] <0> (3)[0:swapper/3]CPU3: Booted secondary processor
<6>[   90.186961] <0> (3)[0:swapper/3][name:cpuinfo&]Detected VIPT I-cache on CPU3
<6>[   90.187010] <0> (3)[0:swapper/3][name:topology&]CPU3: update cpu_capacity 1024
<6>[   90.967430] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   91.968377] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   92.969338] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   93.981727] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   94.982734] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   95.983745] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   96.984763] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   97.985812] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[   98.997493] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[   99.998529] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  100.999543] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<5>[  101.287690] <0> (2)[64:hps_main][name:smp&]CPU3: shutdown
<6>[  102.000543] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<4>[  102.886952] <0> (3)[0:swapper/3]CPU3: Booted secondary processor
<6>[  102.886975] <0> (3)[0:swapper/3][name:cpuinfo&]Detected VIPT I-cache on CPU3
<6>[  102.887021] <0> (3)[0:swapper/3][name:topology&]CPU3: update cpu_capacity 1024
<6>[  103.001518] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  104.013944] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  105.015003] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  106.016028] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[  107.017041] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  108.018020] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<5>[  108.487324] <0> (0)[64:hps_main][name:smp&]CPU3: shutdown
<6>[  109.029818] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<4>[  109.186941] <0> (3)[0:swapper/3]CPU3: Booted secondary processor
<6>[  109.186964] <0> (3)[0:swapper/3][name:cpuinfo&]Detected VIPT I-cache on CPU3
<6>[  109.187010] <0> (3)[0:swapper/3][name:topology&]CPU3: update cpu_capacity 1024
<6>[  110.030807] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[  111.031853] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  112.032836] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[  113.033869] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  114.045531] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  115.046521] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[  116.047493] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  117.048531] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  118.049574] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[  119.061577] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<5>[  119.987321] <0> (1)[64:hps_main][name:smp&]CPU3: shutdown
<6>[  120.062529] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<4>[  120.386962] <0> (3)[0:swapper/3]CPU3: Booted secondary processor
<6>[  120.386986] <0> (3)[0:swapper/3][name:cpuinfo&]Detected VIPT I-cache on CPU3
<6>[  120.387035] <0> (3)[0:swapper/3][name:topology&]CPU3: update cpu_capacity 1024
<6>[  121.063484] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[  122.064508] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[  123.065526] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  124.078677] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  125.079684] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<5>[  125.687336] <0> (1)[64:hps_main][name:smp&]CPU3: shutdown
<6>[  126.080659] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<4>[  126.186941] <0> (3)[0:swapper/3]CPU3: Booted secondary processor
<6>[  126.186964] <0> (3)[0:swapper/3][name:cpuinfo&]Detected VIPT I-cache on CPU3
<6>[  126.187013] <0> (3)[0:swapper/3][name:topology&]CPU3: update cpu_capacity 1024
<6>[  127.081615] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  128.082645] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[  129.094585] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  130.095545] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<5>[  130.987299] <0> (1)[64:hps_main][name:smp&]CPU3: shutdown
<6>[  131.096518] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<4>[  131.786944] <0> (3)[0:swapper/3]CPU3: Booted secondary processor
<6>[  131.786967] <0> (3)[0:swapper/3][name:cpuinfo&]Detected VIPT I-cache on CPU3
<6>[  131.787015] <0> (3)[0:swapper/3][name:topology&]CPU3: update cpu_capacity 1024
<6>[  132.097481] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[  133.098434] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  134.109705] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[  135.110679] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[  136.111701] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[  137.112731] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  138.113789] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  139.126626] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  140.127684] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  141.128639] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<5>[  141.487693] <0> (1)[64:hps_main][name:smp&]CPU3: shutdown
<6>[  142.129624] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<4>[  142.486945] <0> (3)[0:swapper/3]CPU3: Booted secondary processor
<6>[  142.486969] <0> (3)[0:swapper/3][name:cpuinfo&]Detected VIPT I-cache on CPU3
<6>[  142.487015] <0> (3)[0:swapper/3][name:topology&]CPU3: update cpu_capacity 1024
<6>[  143.130591] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  144.141442] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  145.142391] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<5>[  145.387332] <0> (1)[64:hps_main][name:smp&]CPU3: shutdown
<6>[  146.143359] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<4>[  146.186952] <0> (3)[0:swapper/3]CPU3: Booted secondary processor
<6>[  146.186976] <0> (3)[0:swapper/3][name:cpuinfo&]Detected VIPT I-cache on CPU3
<6>[  146.187023] <0> (3)[0:swapper/3][name:topology&]CPU3: update cpu_capacity 1024
<6>[  147.144332] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  148.145279] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  149.157797] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  150.158755] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[  151.159766] <0> (3)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  152.160813] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  153.161852] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  154.174629] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  155.175697] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  156.176727] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[  157.177701] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<5>[  158.087683] <0> (0)[64:hps_main][name:smp&]CPU3: shutdown
<6>[  158.178669] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  159.189572] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<4>[  159.886946] <0> (3)[0:swapper/3]CPU3: Booted secondary processor
<6>[  159.886969] <0> (3)[0:swapper/3][name:cpuinfo&]Detected VIPT I-cache on CPU3
<6>[  159.887018] <0> (3)[0:swapper/3][name:topology&]CPU3: update cpu_capacity 1024
<6>[  160.190545] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  161.191582] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  162.192625] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[  163.193573] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<5>[  164.087343] <0> (0)[64:hps_main][name:smp&]CPU3: shutdown
<6>[  164.205814] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<4>[  164.286936] <0> (3)[0:swapper/3]CPU3: Booted secondary processor
<6>[  164.286959] <0> (3)[0:swapper/3][name:cpuinfo&]Detected VIPT I-cache on CPU3
<6>[  164.287007] <0> (3)[0:swapper/3][name:topology&]CPU3: update cpu_capacity 1024
<6>[  165.206770] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[  166.207731] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  167.208765] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[  168.209816] <0> (1)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<6>[  169.218554] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<4>[  169.487971] <0> (1)[1:init][MTK-WIFI] WIFI_open: WIFI_open: major 153 minor 0 (pid 1)
<4>[  169.488015] <0> (1)[1:init][MTK-WIFI] WIFI_write: WIFI_write 0
<4>[  169.488035] <0> (1)[1:init][MTK-WIFI] WIFI_write: WIFI is already power off!
<4>[  169.488062] <0> (1)[1:init][MTK-WIFI] WIFI_close: WIFI_close: major 153 minor 0 (pid 1)
<6>[  169.519020] <0> (0)[195:servicemanager][name:binder&]binder: 195:195 BC_REQUEST_DEATH_NOTIFICATION death notification already set
<5>[  169.587324] <0> (0)[64:hps_main][name:smp&]CPU3: shutdown
<6>[  170.219552] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[  171.220534] <0> (2)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<5>[  171.587674] <0> (0)[64:hps_main][name:smp&]CPU2: shutdown
<6>[  172.221520] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[  173.222503] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<5>[  173.587607] <0> (0)[64:hps_main][name:smp&]CPU1: shutdown
<6>[  174.223483] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (1 <= 10)
<6>[  175.224460] <0> (0)[568:ledcontroller]tsl2540 0-0039: tsl2540_get_lux: darkness (0 <= 10)
<5>[  175.388318] <0> (0)[569:system_server][name:mtk_rtc_common&]mtk_rtc_common: set tc time = 2023/07/22 10:34:05
<4>[  175.586987] <0> (1)[0:swapper/1]CPU1: Booted secondary processor
<6>[  175.587009] <0> (1)[0:swapper/1][name:cpuinfo&]Detected VIPT I-cache on CPU1
<6>[  175.587055] <0> (1)[0:swapper/1][name:topology&]CPU1: update cpu_capacity 1024

[phodina]

So the reason why it shuts down after ~20 seconds is that the port on my USB won\t supply enough current. Using externally powered USB hub solved the shutdown issue.

Regarding the output of the mount command.The system partition appears to be mounted

root@biscuit:/ # mount | grep system
/dev/block/platform/mtk-msdc.0/by-name/system_b /system ext4 ro,seclabel,noatime,discard,nodelalloc,commit=1,data=ordered 0 0

Will check the dmesg for any issues.

[viraniac]

The mount output is quite different than mine.

biscuit_puffin:/ # mount
rootfs on / type rootfs (rw,seclabel)
/dev/root on / type ext4 (ro,seclabel,relatime,data=ordered)
tmpfs on /dev type tmpfs (rw,seclabel,nosuid,relatime,mode=755)
devpts on /dev/pts type devpts (rw,seclabel,relatime,mode=600)
proc on /proc type proc (rw,relatime,gid=3009,hidepid=2)
sysfs on /sys type sysfs (rw,seclabel,relatime)
selinuxfs on /sys/fs/selinux type selinuxfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,seclabel,relatime)
none on /acct type cgroup (rw,relatime,cpuacct)
tmpfs on /mnt type tmpfs (rw,seclabel,relatime,mode=755,gid=1000)
none on /config type configfs (rw,relatime)
none on /dev/memcg type cgroup (rw,relatime,memory)
none on /dev/cpuctl type cgroup (rw,relatime,cpu)
none on /dev/cpuset type cgroup (rw,relatime,cpuset,noprefix,release_agent=/sbin/cpuset_release_agent)
tmpfs on /dev/logd type tmpfs (rw,context=u:object_r:logd_tmpfs:s0,relatime,size=512k,mode=770,uid=1036,gid=1036)
/dev/block/mmcblk0p16 on /data type ext4 (rw,seclabel,nosuid,nodev,noatime,discard,noauto_da_alloc,data=ordered)
/dev/block/mmcblk0p15 on /cache type ext4 (rw,seclabel,nosuid,nodev,noatime,discard,noauto_da_alloc,data=ordered)
adb on /dev/usb-ffs/adb type functionfs (rw,relatime)
tmpfs on /storage type tmpfs (rw,seclabel,relatime,mode=755,gid=1000)

what version are you on? grep version.name /system/*.prop

[viraniac]

So the reason why it shuts down after ~20 seconds is that the port on my USB won\t supply enough current. Using externally powered USB hub solved the shutdown issue.

If you have a usb 3 port in your computer, try connecting to that one. usb 3 can supply upto 900mA of power instead on just 500mA of usb 2.

[phodina]

/dev/block/platform/bootdevice/by-name/userdata

So here are the partitions from the eMMC storage:

root@biscuit:/ # ls /dev/block/platform/mtk-msdc.0/
by-name
by-num
mmcblk0
mmcblk0boot0
mmcblk0boot1
mmcblk0p1
mmcblk0p10
mmcblk0p11
mmcblk0p12
mmcblk0p13
mmcblk0p14
mmcblk0p15
mmcblk0p16
mmcblk0p2
mmcblk0p3
mmcblk0p4
mmcblk0p5
mmcblk0p6
mmcblk0p7
mmcblk0p8
mmcblk0p9
mmcblk0rpmb

And here's the reply to your question @viraniac

# mount | grep userdata
/dev/block/platform/mtk-msdc.0/by-name/userdata /data ext4 rw,seclabel,nosuid,nodev,noatime,discard,noauto_da_alloc,commit=1,data=ordered 0 0

# /system/bin/busybox strings /dev/block/platform/mtk-msdc.0/by-name/userdata | grep http | grep biscuit | /system/bin/busybox sort -u
0https://d1s31zyz7dcc2d.cloudfront.net/47a1457e0802980eb32f63cd3ce355c0/update-kindle-csm_biscuit-272.6.8.0_user_680767620.bin{"binaryType":"full","md5Sum":"805e721e1bed461d8a81015a1f703fc1","remoteFileSize":"396710733","sha256":"6ababc517529938f0d1e836c3410a91df19683ae62d7fca9e2ca57320d5d2faa"}
https://d1s31zyz7dcc2d.cloudfront.net/47a1457e0802980eb32f63cd3ce355c0/update-kindle-csm_biscuit-272.6.8.0_user_680767620.bin/cache/update-kindle-csm_biscuit-272.6.8.0_user_680767620.binbinary/octet-stream
https://d1s31zyz7dcc2d.cloudfront.prod.ota-cloudfront.net/994407ac6e55e2fb381de6f514555484/update-kindle-biscuit_puffin-NS6555_user_4313M_0008087722362.bin
https://d1s31zyz7dcc2d.cloudfront.prod.ota-cloudfront.net/994407ac6e55e2fb381de6f514555484/update-kindle-biscuit_puffin-NS6555_user_4313M_0008087722362.bin/cache/update-kindle-biscuit_puffin-NS6555_user_4313M_0008087722362.binbinary/octet-stream
z0https://d1s31zyz7dcc2d.cloudfront.prod.ota-cloudfront.net/994407ac6e55e2fb381de6f514555484/update-kindle-biscuit_puffin-NS6555_user_4313M_0008087722362.bin{"binaryType":"full","md5Sum":"0c90e6241451777048da197542c82b87","remoteFileSize":"112616415","sha256":"5d76a4089bb388cbd56113078f10fc87d148f42337795e87c9f04e7dfd395dfb"}

[phodina]

The issue is my USB3/Thunderports are USB-C type and I don't have the cable for micro so I need to use adapter which does not supply enough current.

Yeah so called advancements and sleek design

[viraniac]

Thanks for the URLs. 4313M was not in my list, will add it there.

The issue is my USB3/Thunderports are USB-C type and I don't have the cable for micro so I need to use adapter which does not supply enough current.

Yeah so called advancements and sleek design

yeah I have a macbook 2019 and it annoys me too that I am forced to use an adapter for usb. Luckily my adapter does not give me power issues.

[phodina]

@viraniac Can you share your mount output? So I can also compare the changes?

[viraniac]

It was right here - https://github.com/Dragon863/EchoCLI/issues/12#issuecomment-1670881858

I believe you are running 5.5.5.4 and thats why you have busybox and different mount points

[phodina]

Thanks @viraniac . Closing since the device is rooted and working.

[KowalskiStan]

for me it errors after Check GPT