Hello. Could you please help me with a problem I am having. I am new to Tower and and have researched as much as I could find about my problem, but found nothing, so I am asking here b ecause I dotn know what else to do.
I'll start off by saying that I have no problem flying using radio controller in all modes including GPS. In other Words quad flies well conventionally. it Arms no problem via radio controller.
I attempted to use Tower for the first time yesterday. I can connect to the quad for the purposes of telemetry. the connection is maintained throughout a manual flight. when i switch modes via controller tower reports this change. (I am using Sammy Galaxy S4 - 7", over mavlink/quanum Bluetooth link)
So after testing everything out that far, I decided it was time to try to fly a mission. I made a simple 4 X Way point mission. I replaced WPT 1 with a Take off to 20m, I replaced WPT 4 with a RTL. (WPT 2 & 3 remained standard way points at 20Meters. I then Selected "Upload Mission" (I did not hear any confirmations), i then changed to flight data page, pressed the arm button, I attempted to slide the arm slider, but nothing would happen. I was still able to arm via the radio controller, and Tower would call out "Armed" I then attempted (I now realize stupidly) to select Auto, but nothing (Fortunately) would happen. it was just like trying to arm. I would slide the slider, but it did nothing, it just returned to the flight data page.
Could somebody please help me with my issue. Im not sure what I am doing wrong.
Thank you so much. I desperate to start flying missions.
Hello. Could you please help me with a problem I am having. I am new to Tower and and have researched as much as I could find about my problem, but found nothing, so I am asking here b ecause I dotn know what else to do.
I'll start off by saying that I have no problem flying using radio controller in all modes including GPS. In other Words quad flies well conventionally. it Arms no problem via radio controller.
I attempted to use Tower for the first time yesterday. I can connect to the quad for the purposes of telemetry. the connection is maintained throughout a manual flight. when i switch modes via controller tower reports this change. (I am using Sammy Galaxy S4 - 7", over mavlink/quanum Bluetooth link)
So after testing everything out that far, I decided it was time to try to fly a mission. I made a simple 4 X Way point mission. I replaced WPT 1 with a Take off to 20m, I replaced WPT 4 with a RTL. (WPT 2 & 3 remained standard way points at 20Meters. I then Selected "Upload Mission" (I did not hear any confirmations), i then changed to flight data page, pressed the arm button, I attempted to slide the arm slider, but nothing would happen. I was still able to arm via the radio controller, and Tower would call out "Armed" I then attempted (I now realize stupidly) to select Auto, but nothing (Fortunately) would happen. it was just like trying to arm. I would slide the slider, but it did nothing, it just returned to the flight data page.
Could somebody please help me with my issue. Im not sure what I am doing wrong.
Thank you so much. I desperate to start flying missions.