search

DsChAeK / picade

This is a modified firmware for the retail Picade arduino board to be able to use recalbox.
2 stars 1 forks source link

Error during compilation #1

Closed amilanesi67 closed 7 years ago

amilanesi67 commented 7 years ago

I followed instructions but during Verify / Compile I had this errors:

In file included from C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino\USBAPI.h:38:0,

             from C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino\CDC.cpp:19:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino\CDC.cpp:56:71: error: 'USB_EP_SIZE' was not declared in this scope

D_ENDPOINT(USB_ENDPOINT_OUT(CDC_ENDPOINT_OUT),USB_ENDPOINT_TYPE_BULK,USB_EP_SIZE,0),

                                                                   ^

C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino\USBCore.h:276:22: note: in definition of macro 'D_ENDPOINT'

{ 7, 5, _addr,_attr,_packetSize, _interval }

                  ^

C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino\CDC.cpp:57:71: error: 'USB_EP_SIZE' was not declared in this scope

D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_IN ),USB_ENDPOINT_TYPE_BULK,USB_EP_SIZE,0)

                                                                   ^

C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino\USBCore.h:276:22: note: in definition of macro 'D_ENDPOINT'

{ 7, 5, _addr,_attr,_packetSize, _interval }

                  ^

C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino\CDC.cpp:66:16: error: 'bool CDC_Setup' redeclared as different kind of symbol

bool CDC_Setup(USBSetup& setup)

            ^

In file included from C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino\CDC.cpp:19:0:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino\USBAPI.h:267:6: note: previous declaration 'bool CDC_Setup(Setup&)'

bool CDC_Setup(Setup& setup);

  ^

C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino\CDC.cpp:66:16: error: 'USBSetup' was not declared in this scope

bool CDC_Setup(USBSetup& setup)

            ^

Uso la libreria EEPROM alla versione 2.0 nella cartella: C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\EEPROM exit status 1 Errore durante la compilazione per la scheda Arduino Leonardo.

What happened? Antonio

DsChAeK commented 7 years ago

Wrong arduino version? Be sure to use a fresh installed Arduino IDE v1.6.5 and have replaced the /USB_HID/ files.

amilanesi67 commented 7 years ago

I used the last one, 1.6.12 It's wrong?

amilanesi67 commented 7 years ago

Sorry, I copied the two files found in your /USB_HID/ into Arduino install folder

JOFAMILLY13 commented 7 years ago

Arduino : 1.6.12 (Windows 7), Carte : "Arduino Leonardo"

sketch\Picade.ino.cpp:1:21: fatal error: Arduino.h: No such file or directory

include 

                 ^

compilation terminated.

exit status 1 Erreur de compilation pour la carte Arduino Leonardo

Ce rapport pourrait être plus détaillé avec l'option "Afficher les résultats détaillés de la compilation" activée dans Fichier -> Préférences. voici mon message d'erreur je ne comprend pas help me please

amilanesi67 commented 7 years ago

Avec Arduino IDE v1.6.5 tous va bien. Download ce version.

DsChAeK commented 7 years ago

As already mentioned, you have to use v1.6.5!

JOFAMILLY13 commented 7 years ago

arduino 1.6.5 ok plus de probleme lors de la verification mais quand je televerse la barre verte ce termine et puis rien pas ecris televersement termine ou autre et quand je demare la picade elle detecte toujour le joystick comme keyboard

DsChAeK commented 7 years ago

I know Arduino is not comfortable at all and therefore I wrote the Compile/Flash section and if you follow it step by step you should be successful if there are no USB connection problems.