search

Duet3D / Duet-2-Hardware

The KiCAD source for the Duet 3d printer controller see www.duet3d.com
Other
249 stars 221 forks source link

Adapting Duet Wifi design for a Teensy 3.6 based controller board #4

Closed Flydroid closed 5 years ago

Flydroid commented 7 years ago

Hi Tony,

I'm currently designing a 3D printer controller Board which is based on the Teensy 3.6..

For my motivation, i have to say that there isn't a 3d printer controller for the Teensy yet and the new TMC2130 haven't been used with all it s features. The board should follow the ramps principle, you plug in the microcontroller board and the stepper drivers, here the Teensy 3.6 and the TMC2130 SilentStepSticks. My current featureset: teensy3d

On the software side there are some developments for Marlin on Teensy 3.6 but dc42 also said that a port of Raprap Firmware HAL CoreNG might be doable.

I really like the feature set of the DuetWifi, as it is appropriate to the current 32bit mcus. You have published the DuetWifi hardware files under the Cern OHL 1.2. I've read the License and howto from cern. but I'm inexperienced in the open hardware sector.

Would it be possible to base some of my schematics (mosfet endstop) on the duetwifi when giving the appropriate credit following the Cern OHL v1.2? And of course releasing the source on Github.

Best Regards Jonathan

T3P3 commented 7 years ago

Hi Jonathan

That looks interesting and I saw the thread you linked to. If you port CoreNG to Teensy you then get to benefit from the rest of the RepRapFirmware which has a bunch of nice developments so well worth it.

Regarding the license question you are free to use the DuetWifi hardware design under the terms of the CERN OHL. In summary that means your new project should also be licensed under CERN OHL and the source files shared freely.

HTH, Tony

Flydroid commented 7 years ago

Hi Tony,

That's great to hear. I will keep you updated!

I do have three questions about the duat wifi design:

Best Regards Jonathan

Yahchaan commented 6 years ago

Did you look at the Trinamic TRAMS board SPI only? (On a MEGA) It can maybe help give direction.

Yahchaan commented 6 years ago

You can download the Eagle files https://github.com/trinamic/TRAMS

Flydroid commented 6 years ago

@Yahchaan thanks for the input, actually i haven't looked at the TRAMS board yet.

Yahchaan commented 6 years ago

Did you do anything more? I cannot program, only do good PCB layout and need input - for I like the teensy

Flydroid commented 6 years ago

Unfortunately I haven't been able to continue in the last months. Maybe later this year.

Yahchaan notifications@github.com schrieb am Di., 10. Juli 2018, 17:05:

Did you do anything more? I cannot program, only do good PCB layout and need input - for I like the teensy

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/T3P3/Duet/issues/4#issuecomment-403856248, or mute the thread https://github.com/notifications/unsubscribe-auth/AGcxtQ8Y08h2Ra1hwCvoSdk9nsXDLkT1ks5uFMK0gaJpZM4L4sRM .