[Bug]: - Githubissues

Juslee73 commented 2 years ago

Duet Forum Discussion Thread

https://forum.duet3d.com/topic/28326/m584-help-needed/5

Which Duet products are you using?

[ ] Duet2-Wifi
[ ] Duet2-Ethernet
[ ] Duet Expansion Breakout Board
[ ] Duex2
[ ] Duex5
[ ] Duet2-Maestro
[ ] Maestro Dual Driver Expansion
[X] Duet3-6HC
[ ] Duet3-3HC
[ ] Duet3-1XD
[ ] Duet3-1LC
[ ] Duet3-Tool Distribution Board
[ ] Duet3-Mini5+
[ ] Duet3-Mini2+
[ ] Raspberry Pi or other SBC
[ ] SmartEffector
[ ] Magnetic Filament Sensor
[ ] Laser Filament Sensor
[ ] PT100 Daughterboard
[ ] Thermocouple Daughterboard
[ ] PanelDue
[ ] Other
[ ] None

Firmware Version

3.3

Duet Web Control Version

Dwc3.4

Are you using a Single Board Computer (RaspberryPi) with your Duet?

[ ] Yes I use a SBC.
[X] No I do not use a SBC.

Please upload the results of sending M122 in the gcode console.

M122 Report
Show all drivers acting normal

Please upload the content of your config.g file.

Config.g
Under drivers
All parameters listed correctly 

M584 X0.0:0.1 Y0.2 Z0.4:0.5 E0.3

Please upload the content of any other releveant macro files.

No response

Details specific to your printer.

Custom core xy nema 23s with dual x and dual z on lead screw

Links to additional info.

No response

What happened?

Expected result when I pressed home all… all 3 axes jerked then the home x home y and home z buttons turned blue. I then tried to move the y axis 10

Observed result Y axes moved 10 but so does the z axis. It’s like the m584 command is not setting up correctly on the board or the bug could be in the dwc. Why would y&x move whyen I press the move y button on the dwc dashboard????

Steps to reproduce I have no idea