search

Dvogonen / cyclop_plus_plus

Firmware upgrade for Quanum Cyclops FPV googles that adds support for manual channel selection, textual information on main screen and battery level alarm.
MIT License
20 stars 5 forks source link

Battery alarm recalibration #2

Closed Dvogonen closed 7 years ago

Dvogonen commented 8 years ago

The battery alarm of CYCLOP+ sets in to early according to this post by awap at RCGroups: "Hi, I'm very happy with version 1.4 and the Eachine DVR installed. One whish however: I'm on a 3S battery and the beeper starts at 11.4V (3.8V per cel) and the second level beep starts at 11,2V (3,73V per cel). This is too soon. Is there a way to start the beeper at 3x3.65= 10.95 -11.0 V?"

The behavior is not really a bug, the level in CYCLOP+ was set unnecessarily low. The levels in CYCLOPS++ are probably the same, or at least similar, so the change has to be made in this project to.

Dvogonen commented 7 years ago

There is a slightly different report in CYCLOP+ that is relevant: https://github.com/Dvogonen/cyclop_plus/issues/16

Dvogonen commented 7 years ago

IMplemented in the released 2.2 version