Time before LEDs turn off does not work

[qrockz]

After update to 1.9.10 Bazecor and 1.2.6 Firmware Time before LEDs turn off does not work on Dygma defy. LED's always glow.

[FelisPuma]

I have the same issue, sometimes only the left side but usually both. Not sure if it's related, but I also get an error: Whoops, something went wrong! in Bazecore trying to update any LED settings. The LED toggle key also doesn't work, but the LED mode cycle key does.

Bazecore 1.4.0-rc.2, firmware 1.2.7-beta

[S2Ler]

Whoops, something went wrong!

same issue, can't change mouse options for example

[Saharsh-R]

I think this might help in reproducing the issue...

How to produce the issue

• Connect the keyboard via wires.
• Click the bluetooth pairing button and it connects to phone (or some other device),
• Press the bluetooth button again and press the yellow key to exit bluetooth mode.

but now! all the led settings go away, now i can't turn toggle the leds, the led brightness don't respect the led settings you input. (i think it goes to full brightness)

How to reset the keyboard

• Unplug all the cables
• Turn off both the keyboards (the wireless switch at the back)
• Now turn on again / connect the wires.

The keyboard should be back to normal.

[FelisPuma]

I'm still having this with 1.4.0-rc6. When I reprogram it works correctly until I turn the computer off or switch to a different device, and then it comes back when I boot back up.