Stuck when trying flash the keyboard

Dygmalab / Raise-Firmware

Firmware for the Dygma Raise Keyboard, it uses a Open source Firmware called Kaleidoscope from http://Keyboard.io

GNU General Public License v3.0

44 stars 16 forks source link

Stuck when trying flash the keyboard #15

Closed nosleduc closed 3 years ago

nosleduc commented 3 years ago

I've followed the readme to compile and install the firmware. But when I type make flash the tool is stuck. I'm on mac. Is there any additional procedure to flash the firmware like putting the keyboard in a given mode ?

nosleduc commented 3 years ago

I changed the makefile and set
DEVICE_PORT =/dev/tty.usbmodem21401 BACKUP_PORT =/dev/tty.usbmodem21401

now I have

Set binary mode readWord(addr=0)=0xd0a0d2e readWord(addr=0xe000ed00)=0xa0d2e0a readWord(addr=0x400e0740)=0xd2e0a0d version()= chipId=0xd2e0a0d Unsupported processor Send auto-baud Set binary mode readWord(addr=0)=0xd0a0d2e readWord(addr=0xe000ed00)=0xa0d2e0a readWord(addr=0x400e0740)=0xd2e0a0d version()= chipId=0xd2e0a0d Unsupported processor

nosleduc commented 3 years ago

I did not see the the procedure with esc key