search

DynamoDS / Dynamo

Open Source Graphical Programming for Design
https://dynamobim.org
Other
1.74k stars 634 forks source link

Code Block inactive #7130

Closed sueeehadi closed 7 years ago

sueeehadi commented 8 years ago

If this issue is with Dynamo for Revit, please post your issue on the Dynamo for Revit Issues page.

If this issue is not a bug report or improvement request, please check the Dynamo forum, and start a thread there to discuss your issue.

Dynamo version

1.1.0.2094

Operating system

Windows 10

What did you do?

Code block

What did you expect to see?

Code block greyed out without me being able to write a code

What did you see instead?

Greyed out inactive block image

sharadkjaiswal commented 8 years ago

@sueeehadi, do you remember the steps to reproduce this problem? What happens when you save this graph and open it again?

sueeehadi commented 8 years ago

@sharadkjaiswal It was working fine up till a few moments ago.. I did every other thing I could, restarting both Revit 17 and Dynamo. Copying the graph and saving it under a new name, restarting my PC. Nothing seems to be working.

sharadkjaiswal commented 8 years ago

So even after saving and closing Dynamo, Code Block is un-editable. Can you create a new code block on a new graph? If possible, can you please pass me your DYN file, so that I can investigate?

sueeehadi commented 8 years ago

@sharadkjaiswal on all graphs the code block was un-editable. Old or new. Told my IT guy to help me to uninstall and reinstall it once again. The issue was, I have 2 dynamo versions on my PC. After the older version was removed, it works fine. I guess having the 2 versions is a timely trigger for screwing up the application.

sharadkjaiswal commented 8 years ago

@sueeehadi great to know that it got sorted out, do you mind sharing the version number of the two different Dynamo? We can document that in our readme, so that others won't get into this issue.

sueeehadi commented 8 years ago

1.1.0.2094 and 0.9

MickaelRenaud commented 8 years ago

I just had the same problem with upgrading to 1.1.0.2094 from 1.0 running windows 7pro. so from reading my understanding is that if 2 versions install on one pc it makes nodes not function correctly?

sueeehadi commented 8 years ago

@mrenaud8 well, in my case yeah. I had two versions installed and it screwed up my nodes. There was nothing I could do to retrieve the functional nodes. It worked well after uninstalling the older version. strange though, we were told that there shouldn't be any interfacing issues despite having more then 1 version installed.

jnealb commented 8 years ago

This is tracked with MAGN-10678

QilongTang commented 8 years ago

Fixed in https://github.com/DynamoDS/DynamoRevit/pull/1309

DanielHurtubise commented 8 years ago

Revit 2017.1 Dynamo & Dynamo Core 1.2.0.2690 Windows 10x64 ENU

Code block are greyed out and i have no other version installed.

As a side not, they work fine in Dynamo Studio

jnealb commented 8 years ago

You need the 1.2.0.2831 release for the cbn fix.

DanielHurtubise commented 8 years ago

Just installed the latest build (1.2.1.3083) and i still have the same problem. Dynamo Studio Code Block works fine but not in Revit. I would really love to figure it out.

jnealb commented 8 years ago

@DanielHurtubise Can you please check that the About box in D4R really shows 1.2.1.3083?

DanielHurtubise commented 7 years ago

Morning, now showing 1.2.1.3083 :)

Feel free to email me if you want access to my system (dhurtubise @ rpbw . com) Cheers And sorry for the delay between AU and back in Paris :(

mjkkirschner commented 7 years ago

hey @DanielHurtubise - can you please make sure to totally remove all older versions of both DynamoRevit and Dynamo core before reinstalling?

DanielHurtubise commented 7 years ago

I can do that again, no worries ;) 1 - Anything the uninstaller won't pickup that i should be aware? 2- Any specific version i should reinstall?

Thanks

QilongTang commented 7 years ago

@DanielHurtubise I am testing your case in a clean VM. I am looking at Windows 7, with only Revit2017.1 installed which comes with Dynamo 1.2.1.3083 correct? Any steps you would like to share, did you see CBN uneditable just opening Dynamo?

DanielHurtubise commented 7 years ago

It's Windows 10 x64 (1607 build 14393.447) for the record :)

yes Code Blocks are uneditable at the start. I did offer @kronz to setup a remote access, wouldn't it be easier? :)

Thanks for the help

jnealb commented 7 years ago

@DanielHurtubise @QilongTang It would be, do you use TeamViewer? I installed Dynamo 1.2.1.3083 ontop of Revit 2017 (Build 17.0.499.0 20160714_1515(x64)) in a Win10 VM and the CBN nodes are fine.

DanielHurtubise commented 7 years ago

Yes i do use TeamViewer but you have to keep in my mind the time difference, im in Paris :)

jnealb commented 7 years ago

c'est rien compared to Singapore

DanielHurtubise commented 7 years ago

ahahahah Good morning @jnealb Im in the office, let me know if you want to look at the issue :)

jnealb commented 7 years ago

Sorry today is not good, can do it tomorrow 8:00am or 11:00am EST?

jnealb commented 7 years ago

@DanielHurtubise @QilongTang Actually my colleague Aaron and I are available Thu 8:00am EST. Would this be convenient for you for a TeamViewer session?

DanielHurtubise commented 7 years ago

Of course, i will be in don't worry :) Thanks a lot again guys

DanielHurtubise commented 7 years ago

Anytime you guys want ;) dhurtubise AT RPBW DOT COM :)

jnealb commented 7 years ago

J'arrive dabs 45mns; je suis encore au metro :)

From: DanielHurtubise notifications@github.com Sent: Thursday, December 8, 2016 2:09:11 AM To: DynamoDS/Dynamo Cc: Neal Burnham; Mention Subject: Re: [DynamoDS/Dynamo] Code Block inactive (#7130)

Anytime you guys want ;) dhurtubise AT RPBW DOT COM :)

- You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/DynamoDS/Dynamo/issues/7130#issuecomment-265669192, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AI7HpshOQBiinFU1YVCq2MN4tUPYTVSsks5rF60XgaJpZM4J4wGD.

jnealb commented 7 years ago

Hi Daniel,

Aaron and I are ready. Is this a good time?

Neal

From: DanielHurtubise [mailto:notifications@github.com] Sent: Thursday, December 08, 2016 2:09 AM To: DynamoDS/Dynamo Dynamo@noreply.github.com Cc: Neal Burnham neal.burnham@autodesk.com; Mention mention@noreply.github.com Subject: Re: [DynamoDS/Dynamo] Code Block inactive (#7130)

Anytime you guys want ;) dhurtubise AT RPBW DOT COM :)

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/DynamoDS/Dynamo/issues/7130#issuecomment-265669192, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AI7HpshOQBiinFU1YVCq2MN4tUPYTVSsks5rF60XgaJpZM4J4wGD.

jnealb commented 7 years ago

@DanielHurtubise We have a meeting in 30mns, please let us know.

jnealb commented 7 years ago

Please see https://forum.dynamobim.com/t/dead-code-block-nodes-in-d4r/8132 for a workaround.