on upgrading inav 2.0 to 2.1 barometer indicator turns to red and its already connected
Steps to Reproduce
1.after flashing inav 2.0 on anyfc f7 under configuration tab setting baro as bmp 280 .
baro indicator turns to blue color.
2.everything is working perfectly mag baro sonar gps on inav 2.0
3.then upgrading to inav 2.1 to test breaking mode .after flashing firmware on fc all the indicator turns blue except barometer . then check it on configuration tab .and once again set it to bmp280 and save and reboot.
4.still nothing happen .baro is still red.
Expected behavior
bmp280 is a great barometer . I tested it on anyfc f7 from 1.7 to 2.0 every version on inav its working perfectly .
on upgrading inav 2.0 to 2.1 barometer indicator turns to red and its already connected
Steps to Reproduce
1.after flashing inav 2.0 on anyfc f7 under configuration tab setting baro as bmp 280 . baro indicator turns to blue color. 2.everything is working perfectly mag baro sonar gps on inav 2.0 3.then upgrading to inav 2.1 to test breaking mode .after flashing firmware on fc all the indicator turns blue except barometer . then check it on configuration tab .and once again set it to bmp280 and save and reboot. 4.still nothing happen .baro is still red.
Expected behavior
bmp280 is a great barometer . I tested it on anyfc f7 from 1.7 to 2.0 every version on inav its working perfectly .
Suggested solution(s)
please add bmp 280 targets .
cli data of inav 2.1 resources
https://pastebin.com/Pz0t0Z1a
dump data
https://pastebin.com/KnpSq5GV
version
GCC-7.2.1 20170904 (release) [ARM/embedded-7-branch revision 255204]- FC Board name and
vendor: banggood
INAV/ANYFCF7 2.1.0 Sep 22 2018 / 21:53:31 (507b832)