search

ELynx / ddf-350-modding

My mods for DumboRC DDF-350 RC remote firmware(s)
GNU General Public License v3.0
9 stars 1 forks source link

4WS rear drop out #5

Closed jgillilan closed 4 months ago

jgillilan commented 4 months ago

Hello, Great work! I installed the firmware and everything seems fine. When I select channel 3 for tight turning it turns as expected until I drive forwards, the rear wheels straighten and then don't work until I turn the mix off then it will temporarily work. Pretty sure I set the options exactly as in your video. The channel 4 crab walk seems to operate correctly.

jgillilan commented 4 months ago

Looks like when I trigger channel 2 to drive it presses mix 1 for me? But only mix 1 it leaves 2 alone.

ELynx commented 4 months ago

Hi, Can you add pictures of your settings? It looks like some combo of settings. Check the "Trigger priming", I would say it should be off in your situation. Then also check buttons assignment.

jgillilan commented 4 months ago

Bingo! Turned off the trigger priming and everything works great. Thanks for your work on this! I’d like to donate to the cause. What’s the best option for you?

On Fri, Jul 26, 2024 at 8:35 PM Eduard @.***> wrote:

Hi, Can you add pictures of your settings? It looks like some combo of settings. Check the "Trigger priming", I would say it should be off in your situation. Then also check buttons assignment.

— Reply to this email directly, view it on GitHub https://github.com/ELynx/ddf-350-modding/issues/5#issuecomment-2253677644, or unsubscribe https://github.com/notifications/unsubscribe-auth/AGLHMMMYFP4B6IULJBCEWTTZOLTLVAVCNFSM6AAAAABLQ4BX6WVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENJTGY3TONRUGQ . You are receiving this because you authored the thread.Message ID: @.***>

ELynx commented 4 months ago

Hey, glad it helped! On the main page of this project, there are links to ko-fi, github sponsorship, check which one works for you. Here they are also https://ko-fi.com/eduardlynx https://github.com/sponsors/ELynx both should have one-time and repeated options. If none of that works, we can work out paypal.

ELynx commented 3 months ago

Bingo! Turned off the trigger priming and everything works great. Thanks for your work on this! I’d like to donate to the cause. What’s the best option for you? … On Fri, Jul 26, 2024 at 8:35 PM Eduard @.> wrote: Hi, Can you add pictures of your settings? It looks like some combo of settings. Check the "Trigger priming", I would say it should be off in your situation. Then also check buttons assignment. — Reply to this email directly, view it on GitHub <#5 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AGLHMMMYFP4B6IULJBCEWTTZOLTLVAVCNFSM6AAAAABLQ4BX6WVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENJTGY3TONRUGQ . You are receiving this because you authored the thread.Message ID: @.>

Hey, I have very strange readings on Ko-Fi, ones I don't understand. At one side, I see someone donated, at other side I cannot see who and when. If you did, is everything OK on your side? Sometimes paypal pauses these payments as "suspicious".