Cross Trims like some of the old Kraft radios

[GoogleCodeExporter]

What new feature/ability do you want?
An option to enable cross trims.

What is the expected output?
When the option is turned on, the trims are moved to the opposite stick, so 
that you can fly the poorly behaving axis and click the trims with the opposite 
hand. For example, if your aileron was on the right stick, and you wanted to 
give it one click of aileron trim, you would push the bottom left trim switch 
(the trim switch under the throttle stick in a mode 2 transmitter instead of 
the trim switch that's under the aileron).

What version of the product are you using?

N/A

Please provide any additional information below.

Some of the old Kraft radios could be setup that way, and I think it's 
superior. It allows you to keep flying the axis that you want to trim while you 
trim it out without 1) removing your fingers from that axis, and 2) without 
having to fumble the opposite hand over the center of the transmitter and the 
strap attachment and feel for the trims. Transmitter ergonomics is one of the 
things that manufacturers seem to sacrifice for styling, but it's one thing we 
could possibly fix with software.

p.s. keep up the good work!

Original issue reported on code.google.com by tryandge...@gmail.com on 12 Oct 2011 at 9:27

[GoogleCodeExporter]

That would be a wonderful feature

Original comment by joaoalve...@googlemail.com on 13 Oct 2011 at 12:27

[GoogleCodeExporter]

Yes, the ACE MicroPro8000 allowed cross trims also. I fly with these whenever I 
can.

Original comment by wb4...@aol.com on 3 Feb 2013 at 1:06