R6-0 version of RELEASE still uses old module versions

R6-0 version of RELEASE had a couple of problems:

It was still using old versions of many synApps modules. I think it should have been updated to reflect the closest version to the one used in the synApps R6-0 release.
It did not work "out of the box" with xxx. When I built xxx I got an error that libnetCDF.a could not be found. This is because xxx depends on ADCore, and ADCore needs ADSupport. I added ADSUPPORT to this RELEASE file and that fixed the problem.

I have pushed the changes. These are the differences from R6-0:

corvette:~/support/configure>git diff R6-0 master RELEASE
diff --git a/RELEASE b/RELEASE
index 8261f32..d18e2c6 100644
--- a/RELEASE
+++ b/RELEASE
@@ -12,47 +12,45 @@ SUPPORT=/home/oxygen/MOONEY/epics/synApps/support
 #EPICS_BASE=/home/oxygen/MOONEY/epics/bazaar/base-3.14
 #EPICS_BASE=/home/oxygen/MOONEY/epics/bazaar/base-3.15
 #EPICS_BASE=/APSshare/epics/base-3.14.12.4
-EPICS_BASE=/home/oxygen/MOONEY/epics/base-3.14.12.5
+EPICS_BASE=/home/oxygen/MOONEY/epics/base-3.15.5
 -include $(TOP)/configure/EPICS_BASE
 -include $(TOP)/configure/EPICS_BASE.$(EPICS_HOST_ARCH)

 #/usr/local/iocapps/cvsroot/modules/bus/allenBradley
-ALIVE=$(SUPPORT)/alive-1-0-1
+ALIVE=$(SUPPORT)/alive-1-1-0
 # http://www.aps.anl.gov/epics/modules/bus/allenBradley
 ALLEN_BRADLEY=$(SUPPORT)/allenBradley-2-3
-AREA_DETECTOR=$(SUPPORT)/areaDetector-2-4
+AREA_DETECTOR=$(SUPPORT)/areaDetector-3-3-2
 ADCORE=$(AREA_DETECTOR)/ADCore
-ADBINARIES=$(AREA_DETECTOR)/ADBinaries
-ADEXAMPLE=$(AREA_DETECTOR)/ADExample
-ASYN=$(SUPPORT)/asyn-4-26
-AUTOSAVE=$(SUPPORT)/autosave-5-7-1
-BUSY=$(SUPPORT)/busy-1-6-1
-CALC=$(SUPPORT)/calc-3-6-1
-CAMAC=$(SUPPORT)/camac-2-7
-CAPUTRECORDER=$(SUPPORT)/caputRecorder-1-5-1
-DAC128V=$(SUPPORT)/dac128V-2-8
-DELAYGEN=$(SUPPORT)/delaygen-1-1-1
+ADSUPPORT=$(AREA_DETECTOR)/ADSupport
+ASYN=$(SUPPORT)/asyn-4-33
+AUTOSAVE=$(SUPPORT)/autosave-5-9
+BUSY=$(SUPPORT)/busy-1-7
+CALC=$(SUPPORT)/calc-3-7-1
+CAMAC=$(SUPPORT)/camac-2-7-1
+CAPUTRECORDER=$(SUPPORT)/caputRecorder-1-7-1
+DAC128V=$(SUPPORT)/dac128V-2-9
+DELAYGEN=$(SUPPORT)/delaygen-1-2-0
 DEVIOCSTATS=$(SUPPORT)/devIocStats-3-1-14
-DXP=$(SUPPORT)/dxp-3-5
-IP=$(SUPPORT)/ip-2-17
-IP330=$(SUPPORT)/ip330-2-8
-IPAC=$(SUPPORT)/ipac-2-13
-IPUNIDIG=$(SUPPORT)/ipUnidig-2-10
+DXP=$(SUPPORT)/dxp-5-0
+IP=$(SUPPORT)/ip-2-19-1
+IP330=$(SUPPORT)/ip330-2-9
+IPAC=$(SUPPORT)/ipac-2-15
+IPUNIDIG=$(SUPPORT)/ipUnidig-2-11
 LOVE=$(SUPPORT)/love-3-2-5
-MCA=$(SUPPORT)/mca-7-6
-MEASCOMP=$(SUPPORT)/measComp-1-1
-MODBUS=$(SUPPORT)/modbus-2-7
-MOTOR=$(SUPPORT)/motor-6-9
-OPTICS=$(SUPPORT)/optics-2-9-3
-QUADEM=$(SUPPORT)/quadEM-5-0
+MCA=$(SUPPORT)/mca-7-7
+MEASCOMP=$(SUPPORT)/measComp-2-1-1
+MODBUS=$(SUPPORT)/modbus-2-11
+MOTOR=$(SUPPORT)/motor-6-10-1
+OPTICS=$(SUPPORT)/optics-2-13-1
+QUADEM=$(SUPPORT)/quadEM-9-1
 #http://www-csr.bessy.de/control/SoftDist/sequencer
-#SNCSEQ=$(SUPPORT)/seq-2-1-18
-SNCSEQ=$(SUPPORT)/seq-2-2-3
-SOFTGLUE=$(SUPPORT)/softGlue-2-7
-SSCAN=$(SUPPORT)/sscan-2-10-2
-STD=$(SUPPORT)/std-3-4-1
+SNCSEQ=$(SUPPORT)/seq-2-2-4
+SOFTGLUE=$(SUPPORT)/softGlue-2-8-1
+SSCAN=$(SUPPORT)/sscan-2-11-1
+STD=$(SUPPORT)/std-3-5
 #http://epics.web.psi.ch/software/streamdevice/
-STREAM=$(SUPPORT)/stream-2-6c
-VAC=$(SUPPORT)/vac-1-6
-VME=$(SUPPORT)/vme-2-8-2
-XXX=$(SUPPORT)/xxx-5-8-4
+STREAM=$(SUPPORT)/stream-2-7-7b
+VAC=$(SUPPORT)/vac-1-8
+VME=$(SUPPORT)/vme-2-9
+XXX=$(SUPPORT)/xxx-6-0

EPICS-synApps / configure

R6-0 version of RELEASE still uses old module versions #7